rfc1382 Download

x25AdmnTable

This table contains the administratively set configuration parameters for an X.25 Packet Level Entity (PLE). Most of the objects in this table have corresponding objects in the x25OperTable. This table contains the values as last set by the administrator. ...

x25AdmnEntry

Entries of x25AdmnTable.

x25AdmnIndex

The ifIndex value for the X.25 Interface.

x25AdmnInterfaceMode

Identifies DCE/DTE mode in which the interface operates. A value of dxe indicates the mode will be determined by XID negotiation.

x25AdmnMaxActiveCircuits

The maximum number of circuits this PLE can support; including PVCs.

x25AdmnPacketSequencing

The modulus of the packet sequence number space.

x25AdmnRestartTimer

The T20 restart timer in milliseconds.

x25AdmnCallTimer

The T21 Call timer in milliseconds.

x25AdmnResetTimer

The T22 Reset timer in milliseconds.

x25AdmnClearTimer

The T23 Clear timer in milliseconds.

x25AdmnWindowTimer

The T24 window status transmission timer in milliseconds. A value of 2147483647 indicates no window timer in use.

x25AdmnDataRxmtTimer

The T25 data retransmission timer in milliseconds. A value of 2147483647 indicates no data retransmission timer in use.

x25AdmnInterruptTimer

The T26 interrupt timer in milliseconds. A value of 2147483647 indicates no interrupt timer in use.

x25AdmnRejectTimer

The T27 Reject retransmission timer in milliseconds. A value of 2147483647 indicates no reject timer in use.

x25AdmnRegistrationRequestTimer

The T28 registration timer in milliseconds. A value of 2147483647 indicates no registration timer in use.

x25AdmnMinimumRecallTimer

Minimum time interval between unsuccessful call attempts in milliseconds.

x25AdmnRestartCount

The R20 restart retransmission count.

x25AdmnResetCount

The r22 Reset retransmission count.

x25AdmnClearCount

The r23 Clear retransmission count.

x25AdmnDataRxmtCount

The R25 Data retransmission count. This value is irrelevant if the x25AdmnDataRxmtTimer indicates no timer in use.

x25AdmnRejectCount

The R27 reject retransmission count. This value is irrelevant if the x25AdmnRejectTimer indicates no timer in use.

x25AdmnRegistrationRequestCount

The R28 Registration retransmission Count. This value is irrelevant if the x25AdmnRegistrationRequestTimer indicates no timer in use.

x25AdmnNumberPVCs

The number of PVC configured for this PLE. The PVCs use channel numbers from 1 to this number.

x25AdmnDefCallParamId

This identifies the instance of the x25CallParmIndex for the entry in the x25CallParmTable which contains the default call parameters for this PLE.

x25AdmnLocalAddress

The local address for this PLE subnetwork. A zero length address maybe returned by PLEs that only support PVCs.

x25AdmnProtocolVersionSupported

Identifies the version of the X.25 protocol this interface should support. Object identifiers for common versions are defined below in the x25ProtocolVersion subtree.

x25OperTable

The operation parameters in use by the X.25 PLE.

x25OperEntry

Entries of x25OperTable.

x25OperIndex

The ifIndex value for the X.25 interface.

x25OperInterfaceMode

Identifies DCE/DTE mode in which the interface operates. A value of dxe indicates the role will be determined by XID negotiation at the Link Layer and that negotiation has not yet taken place.

x25OperMaxActiveCircuits

Maximum number of circuits this PLE can support.

x25OperPacketSequencing

The modulus of the packet sequence number space.

x25OperRestartTimer

The T20 restart timer in milliseconds.

x25OperCallTimer

The T21 Call timer in milliseconds.

x25OperResetTimer

The T22 Reset timer in milliseconds.

x25OperClearTimer

The T23 Clear timer in milliseconds.

x25OperWindowTimer

The T24 window status transmission timer milliseconds. A value of 2147483647 indicates no window timer in use.

x25OperDataRxmtTimer

The T25 Data Retransmission timer in milliseconds. A value of 2147483647 indicates no data retransmission timer in use.

x25OperInterruptTimer

The T26 Interrupt timer in milliseconds. A value of 2147483647 indicates interrupts are not being used.

x25OperRejectTimer

The T27 Reject retransmission timer in milliseconds. A value of 2147483647 indicates no reject timer in use.

x25OperRegistrationRequestTimer

The T28 registration timer in milliseconds. A value of 2147483647 indicates no registration timer in use.

x25OperMinimumRecallTimer

Minimum time interval between unsuccessful call attempts in milliseconds.

x25OperRestartCount

The R20 restart retransmission count.

x25OperResetCount

The r22 Reset retransmission count.

x25OperClearCount

The r23 Clear retransmission count.

x25OperDataRxmtCount

The R25 Data retransmission count. This value is undefined if the x25OperDataRxmtTimer indicates no timer in use.

x25OperRejectCount

The R27 reject retransmission count. This value is undefined if the x25OperRejectTimer indicates no timer in use.

x25OperRegistrationRequestCount

The R28 Registration retransmission Count. This value is undefined if the x25OperREgistrationRequestTimer indicates no timer in use.

x25OperNumberPVCs

The number of PVC configured for this PLE. The PVCs use channel numbers from 1 to this number.

x25OperDefCallParamId

This identifies the instance of the x25CallParmIndex for the entry in the x25CallParmTable that contains the default call parameters for this PLE.

x25OperLocalAddress

The local address for this PLE subnetwork. A zero length address maybe returned by PLEs that only support PVCs.

x25OperDataLinkId

This identifies the instance of the index object in the first table of the most device specific MIB for the interface used by this PLE.

x25OperProtocolVersionSupported

Identifies the version of the X.25 protocol this interface supports. Object identifiers for common versions are defined below in the x25ProtocolVersion subtree.

x25StatTable

Statistics information about this X.25 PLE.

x25StatEntry

Entries of the x25StatTable.

x25StatIndex

The ifIndex value for the X.25 interface.

x25StatInCalls

The number of incoming calls received.

x25StatInCallRefusals

The number of incoming calls refused. This includes calls refused by the PLE and by higher layers. This also includes calls cleared because of restricted fast select.

x25StatInProviderInitiatedClears

The number of clear requests with a cause code other than DTE initiated.

x25StatInRemotelyInitiatedResets

The number of reset requests received with cause code DTE initiated.

x25StatInProviderInitiatedResets

The number of reset requests received with cause code other than DTE initiated.

x25StatInRestarts

The number of remotely initiated (including provider initiated) restarts experienced by the PLE excluding the restart associated with bringing up the PLE interface. This only counts restarts received when the PLE already has an established connection wit ...

x25StatInDataPackets

The number of data packets received.

x25StatInAccusedOfProtocolErrors

The number of packets received containing a procedure error cause code. These include clear, reset, restart, or diagnostic packets.

x25StatInInterrupts

The number of interrupt packets received by the PLE or over the PVC/VC.

x25StatOutCallAttempts

The number of calls attempted.

x25StatOutCallFailures

The number of call attempts which failed. This includes calls that were cleared because of restrictive fast select.

x25StatOutInterrupts

The number of interrupt packets send by the PLE or over the PVC/VC.

x25StatOutDataPackets

The number of data packets sent by this PLE.

x25StatOutgoingCircuits

The number of active outgoing circuits. This includes call requests sent but not yet confirmed. This does not count PVCs.

x25StatIncomingCircuits

The number of active Incoming Circuits. This includes call indications received but not yet acknowledged. This does not count PVCs.

x25StatTwowayCircuits

The number of active two-way Circuits. This includes call requests sent but not yet confirmed. This does not count PVCs.

x25StatRestartTimeouts

The number of times the T20 restart timer expired.

x25StatCallTimeouts

The number of times the T21 call timer expired.

x25StatResetTimeouts

The number of times the T22 reset timer expired.

x25StatClearTimeouts

The number of times the T23 clear timer expired.

x25StatDataRxmtTimeouts

The number of times the T25 data timer expired.

x25StatInterruptTimeouts

The number of times the T26 interrupt timer expired.

x25StatRetryCountExceededs

The number of times a retry counter was exhausted.

x25StatClearCountExceededs

The number of times the R23 clear count was exceeded.

x25ChannelTable

These objects contain information about the channel number configuration in an X.25 PLE. These values are the configured values. changes in these values after the interfaces has started may not be reflected in the operating PLE.

x25ChannelEntry

Entries of x25ChannelTable.

x25ChannelIndex

The ifIndex value for the X.25 Interface.

x25ChannelLIC

Lowest Incoming channel.

x25ChannelHIC

Highest Incoming channel. A value of zero indicates no channels in this range.

x25ChannelLTC

Lowest Two-way channel.

x25ChannelHTC

Highest Two-way channel. A value of zero indicates no channels in this range.

x25ChannelLOC

Lowest outgoing channel.

x25ChannelHOC

Highest outgoing channel. A value of zero indicates no channels in this range.

x25CircuitTable

These objects contain general information about a specific circuit of an X.25 PLE.

x25CircuitEntry

Entries of x25CircuitTable.

x25CircuitIndex

The ifIndex value for the X.25 Interface.

x25CircuitChannel

The channel number for this circuit.

x25CircuitStatus

This object reports the current status of the circuit. An existing instance of this object can only be set to startClear, startPvcResetting, or invalid. An instance with the value calling or open can only be set to startClear and that action will start c ...

x25CircuitEstablishTime

The value of sysUpTime when the channel was associated with this circuit. For outgoing SVCs, this is the time the first call packet was sent. For incoming SVCs, this is the time the call indication was received. For PVCs this is the time the PVC was ab ...

x25CircuitDirection

The direction of the call that established this circuit.

x25CircuitInOctets

The number of octets of user data delivered to upper layer.

x25CircuitInPdus

The number of PDUs received for this circuit.

x25CircuitInRemotelyInitiatedResets

The number of Resets received for this circuit with cause code of DTE initiated.

x25CircuitInProviderInitiatedResets

The number of Resets received for this circuit with cause code other than DTE initiated.

x25CircuitInInterrupts

The number of interrupt packets received for this circuit.

x25CircuitOutOctets

The number of octets of user data sent for this circuit.

x25CircuitOutPdus

The number of PDUs sent for this circuit.

x25CircuitOutInterrupts

The number of interrupt packets sent on this circuit.

x25CircuitDataRetransmissionTimeouts

The number of times the T25 data retransmission timer expired for this circuit.

x25CircuitResetTimeouts

The number of times the T22 reset timer expired for this circuit.

x25CircuitInterruptTimeouts

The number of times the T26 Interrupt timer expired for this circuit.

x25CircuitCallParamId

This identifies the instance of the x25CallParmIndex for the entry in the x25CallParmTable which contains the call parameters in use with this circuit. The entry referenced must contain the values that are currently in use by the circuit rather than prop ...

x25CircuitCalledDteAddress

For incoming calls, this is the called address from the call indication packet. For outgoing calls, this is the called address from the call confirmation packet. This will be zero length for PVCs.

x25CircuitCallingDteAddress

For incoming calls, this is the calling address from the call indication packet. For outgoing calls, this is the calling address from the call confirmation packet. This will be zero length for PVCs.

x25CircuitOriginallyCalledAddress

For incoming calls, this is the address in the call Redirection or Call Deflection Notification facility if the call was deflected or redirected, otherwise it will be called address from the call indication packet. For outgoing calls, this is the address ...

x25CircuitDescr

A descriptive string associated with this circuit. This provides a place for the agent to supply any descriptive information it knows about the use or owner of the circuit. The agent may return the process identifier and user name for the process using ...

x25ClearedCircuitEntriesRequested

The requested number of entries for the agent to keep in the x25ClearedCircuit table.

x25ClearedCircuitEntriesGranted

The actual number of entries the agent will keep in the x25ClearedCircuit Table.

x25ClearedCircuitTable

A table of entries about closed circuits. Entries must be made in this table whenever circuits are closed and the close request or close indication packet contains a clearing cause other than DTE Originated or a Diagnostic code field other than Higher Lay ...

x25ClearedCircuitEntry

Information about a cleared circuit.

x25ClearedCircuitIndex

An index that uniquely distinguishes one entry in the clearedCircuitTable from another. This index will start at 2147483647 and will decrease by one for each new entry added to the table. Upon reaching one, the index will reset to 2147483647. Because th ...

x25ClearedCircuitPleIndex

The value of ifIndex for the PLE which cleared the circuit that created the entry.

x25ClearedCircuitTimeEstablished

The value of sysUpTime when the circuit was established. This will be the same value that was in the x25CircuitEstablishTime for the circuit.

x25ClearedCircuitTimeCleared

The value of sysUpTime when the circuit was cleared. For locally initiated clears, this will be the time when the clear confirmation was received. For remotely initiated clears, this will be the time when the clear indication was received.

x25ClearedCircuitChannel

The channel number for the circuit that was cleared.

x25ClearedCircuitClearingCause

The Clearing Cause from the clear request or clear indication packet that cleared the circuit.

x25ClearedCircuitDiagnosticCode

The Diagnostic Code from the clear request or clear indication packet that cleared the circuit.

x25ClearedCircuitInPdus

The number of PDUs received on the circuit.

x25ClearedCircuitOutPdus

The number of PDUs transmitted on the circuit.

x25ClearedCircuitCalledAddress

The called address from the cleared circuit.

x25ClearedCircuitCallingAddress

The calling address from the cleared circuit.

x25ClearedCircuitClearFacilities

The facilities field from the clear request or clear indication packet that cleared the circuit. A size of zero indicates no facilities were present.

x25CallParmTable

These objects contain the parameters that can be varied between X.25 calls. The entries in this table are independent of the PLE. There exists only one of these tables for the entire system. The indexes for the entries are independent of any PLE or any ...

x25CallParmEntry

Entries of x25CallParmTable.

x25CallParmIndex

A value that distinguishes this entry from another entry. Entries in this table are referenced from other objects which identify call parameters. It is impossible to know which other objects in the MIB reference entries in the table by looking at this ta ...

x25CallParmStatus

The status of this call parameter entry. See RFC 1271 for details of usage.

x25CallParmRefCount

The number of references know by a management station to exist to this set of call parameters. This is the number of other objects that have returned a value of, and will return a value of, the index for this set of call parameters. Examples of such obj ...

x25CallParmInPacketSize

The maximum receive packet size in octets for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE means use a default size of 128.

x25CallParmOutPacketSize

The maximum transmit packet size in octets for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use a default size of 128.

x25CallParmInWindowSize

The receive window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use 2.

x25CallParmOutWindowSize

The transmit window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use 2.

x25CallParmAcceptReverseCharging

An enumeration defining if the PLE will accept or refuse charges. A value of default for a circuit means use the PLE default value. A value of neverAccept is only used for the PLE default and indicates the PLE will never accept reverse charging. A value ...

x25CallParmProposeReverseCharging

An enumeration defining if the PLE should propose reverse or local charging. The value of default for a circuit means use the PLE default. The value of default for the PLE default means use local.

x25CallParmFastSelect

Expresses preference for use of fast select facility. The value of default for a circuit is the PLE default. A value of default for the PLE means noFastSelect. A value of noFastSelect or noRestrictedFastResponse indicates a circuit may not use fast sel ...

x25CallParmInThruPutClasSize

The incoming throughput class to negotiate. A value of tcDefault for a circuit means use the PLE default. A value of tcDefault for the PLE default means tcNone. A value of tcNone means do not negotiate throughtput class.

x25CallParmOutThruPutClasSize

The outgoing throughput class to negotiate. A value of tcDefault for a circuit means use the PLE default. A value of tcDefault for the PLE default means use tcNone. A value of tcNone means do not negotiate throughtput class.

x25CallParmCug

The Closed User Group to specify. This consists of two or four octets containing the characters 0 through 9. A zero length string indicates no facility requested. A string length of three containing the characters DEF for a circuit means use the PLE de ...

x25CallParmCugoa

The Closed User Group with Outgoing Access to specify. This consists of two or four octets containing the characters 0 through 9. A string length of three containing the characters DEF for a circuit means use the PLE default (the PLE default parameters ...

x25CallParmBcug

The Bilateral Closed User Group to specify. This consists of two octets containing the characters 0 through 9. A string length of three containing the characters DEF for a circuit means use the PLE default (the PLE default parameter may not reference an ...

x25CallParmNui

The Network User Identifier facility. This is binary value to be included immediately after the length field. The PLE will supply the length octet. A zero length string indicates no facility requested. This value is ignored for the PLE default paramet ...

x25CallParmChargingInfo

The charging Information facility. A value of default for a circuit means use the PLE default. The value of default for the default PLE parameters means use noFacility. The value of noFacility means do not include a facility.

x25CallParmRpoa

The RPOA facility. The octet string contains n * 4 sequences of the characters 0-9 to specify a facility with n entries. The octet string containing the 3 characters DEF for a circuit specifies use of the PLE default (the entry for the PLE default may no ...

x25CallParmTrnstDly

The Transit Delay Selection and Indication value. A value of 65536 indicates no facility requested. A value of 65537 for a circuit means use the PLE default (the PLE default parameters entry may not use the value 65537). The value 65535 may only be use ...

x25CallParmCallingExt

The Calling Extension facility. This contains one of the following: A sequence of hex digits with the value to be put in the facility. These digits will be converted to binary by the agent and put in the facility. These octets do not include the length ...

x25CallParmCalledExt

The Called Extension facility. This contains one of the following: A sequence of hex digits with the value to be put in the facility. These digits will be converted to binary by the agent and put in the facility. These octets do not include the length ...

x25CallParmInMinThuPutCls

The minimum input throughput Class. A value of 16 for a circuit means use the PLE default (the PLE parameters entry may not use this value). A value of 17 indicates no facility requested.

x25CallParmOutMinThuPutCls

The minimum output throughput Class. A value of 16 for a circuit means use the PLE default (the PLE parameters entry may not use this value). A value of 17 indicates no facility requested.

x25CallParmEndTrnsDly

The End-to-End Transit Delay to negotiate. An octet string of length 2, 4, or 6 contains the facility encoded as specified in ISO/IEC 8208 section 15.3.2.4. An octet string of length 3 containing the three character DEF for a circuit means use the PLE de ...

x25CallParmPriority

The priority facility to negotiate. The octet string encoded as specified in ISO/IEC 8208 section 15.3.2.5. A zero length string indicates no facility requested. The entry for the PLE default parameters must be zero length.

x25CallParmProtection

A string contains the following: A hex string containing the value for the protection facility. This will be converted from hex to the octets actually in the packet by the agent. The agent will supply the length field and the length octet is not contain ...

x25CallParmExptData

The Expedited Data facility to negotiate. A value of default for a circuit means use the PLE default value. The entry for the PLE default parameters may not have the value default.

x25CallParmUserData

The call user data as placed in the packet. A zero length string indicates no call user data. If both the circuit call parameters and the PLE default have call user data defined, the data from the circuit call parameters will be used. If only the PLE ha ...

x25CallParmCallingNetworkFacilities

The calling network facilities. The facilities are encoded here exactly as encoded in the call packet. These facilities do not include the marker facility code. A zero length string in the entry for the parameter to use when establishing a circuit means ...

x25CallParmCalledNetworkFacilities

The called network facilities. The facilities are encoded here exactly as encoded in the call packet. These facilities do not include the marker facility code. A zero length string in the entry for the parameter to use when establishing a circuit means ...