rfc1604 Download

frLportTable

The Frame Relay Logical Port Information table.

frLportEntry

An entry in the Frame Relay Logical Port Information table.

frLportNumPlan

The value of this object identifies the network address numbering plan for this UNI/NNI logical port. The network address is the object ifPhysAddress. The value none implies that there is no ifPhysAddress. The SNMP proxy-agent will return an octet string ...

frLportContact

The value of this object identifies the network contact for this UNI/NNI logical port.

frLportLocation

The value of this object identifies the Frame Relay network location for this UNI/NNI logical port.

frLportType

The value of this object identifies the type of network interface for this logical port.

frLportAddrDLCILen

The value of this object identifies the Q.922 Address field length and DLCI length for this UNI/NNI logical port.

frLportVCSigProtocol

The value of this object identifies the Local In-Channel Signaling Protocol that is used for this frame relay UNI/NNI logical port.

frLportVCSigPointer

The value of this object is used as a pointer to the table that contains the Local In-Channel Signaling Protocol parameters and errors for this UNI/NNI logical port. See the Frame Relay Management VC Signaling Parameters and Errors Group.

frMgtVCSigTable

The Frame Relay Management VC Signaling Parameters and Errors table.

frMgtVCSigEntry

An entry in the Frame Relay Management VC Signaling Parameters Errors table.

frMgtVCSigProced

The value of this object identifies the Local In-Channel Signaling Procedure that is used for this UNI/NNI logical port. The UNI/NNI logical port can be performing only user-to-network network-side procedures or bidirectional procedures.

frMgtVCSigUserN391

The value of this object identifies the User-side N391 full status polling cycle value for this UNI/NNI logical port. If the logical port is not performing user-side procedures, then this value is equal to noSuchName. This object applies to Q.933 Annex A ...

frMgtVCSigUserN392

The value of this object identifies the User-side N392 error threshold value for this UNI/NNI logical port. If the logical port is not performing user-side procedures, then this value is equal to noSuchName. This object applies to Q.933 Annex A and T1.61 ...

frMgtVCSigUserN393

The value of this object identifies the User-side N393 monitored events count value for this UNI/NNI logical port. If the logical port is not performing user-side procedures, then this value is equal to noSuchName. This object applies to Q.933 Annex A an ...

frMgtVCSigUserT391

The value of this object identifies the User-side T391 link integrity verification polling timer value for this UNI/NNI logical port. If the logical port is not performing user-side procedures, then this value is equal to noSuchName. This object applies ...

frMgtVCSigNetN392

The value of this object identifies the Network- side N392 error threshold value (nN2 for LMI) for this UNI/NNI logical port. If the logical port is not performing network-side procedures, then this value is equal to noSuchName. This object applies to Q. ...

frMgtVCSigNetN393

The value of this object identifies the Network- side N393 monitored events count value (nN3 for LMI) for this UNI/NNI logical port. If the logical port is not performing network-side procedures, then this value is equal to noSuchName. This object applie ...

frMgtVCSigNetT392

The value of this object identifies the Network- side T392 polling verification timer value (nT2 for LMI) for this UNI/NNI logical port. If the logical port is not performing network-side procedures, then this value is equal to noSuchName. This object a ...

frMgtVCSigNetnN4

The value of this object identifies the Network- side nN4 maximum status enquires received value for this UNI/NNI logical port. If the logical port is not performing network-side procedures or is not performing LMI procedures, then this value is equal to ...

frMgtVCSigNetnT3

The value of this object identifies the Network- side nT3 timer (for nN4 status enquires received) value for this UNI/NNI logical port. If the logical port is not performing network-side procedures or is not performing LMI procedures, then this value is ...

frMgtVCSigUserLinkRelErrors

The number of user-side local in-channel signaling link reliability errors (i.e., non- receipt of Status/Status Enquiry messages or invalid sequence numbers in a Link Integrity Verification Information Element) for this UNI/NNI logical port. If the logic ...

frMgtVCSigUserProtErrors

The number of user-side local in-channel signaling protocol errors (i.e., protocol discriminator, message type, call reference, and mandatory information element errors) for this UNI/NNI logical port. If the logical port is not performing user-side proce ...

frMgtVCSigUserChanInactive

The number of times the user-side channel was declared inactive (i.e., N392 errors in N393 events) for this UNI/NNI logical port. If the logical port is not performing user-side procedures, then this value is equal to noSuchName.

frMgtVCSigNetLinkRelErrors

The number of network-side local in-channel signaling link reliability errors (i.e., non- receipt of Status/Status Enquiry messages or invalid sequence numbers in a Link Integrity Verification Information Element) for this UNI/NNI logical port. If the lo ...

frMgtVCSigNetProtErrors

The number of network-side local in-channel signaling protocol errors (i.e., protocol discriminator, message type, call reference, and mandatory information element errors) for this UNI/NNI logical port. If the logical port is not performing network-side ...

frMgtVCSigNetChanInactive

The number of times the network-side channel was declared inactive (i.e., N392 errors in N393 events) for this UNI/NNI logical port. If the logical port is not performing network-side procedures, then this value is equal to noSuchName.

frPVCEndptTable

The Frame Relay PVC End-Point table. This table is used to model a PVC end-point. This table contains the traffic parameters and statistics for a PVC end-point.

frPVCEndptEntry

An entry in the Frame Relay PVC Endpoint table.

frPVCEndptDLCIIndex

The value of this object is equal to the DLCI value for this PVC end-point.

frPVCEndptInMaxFrameSize

The value of this object is the size in octets of the largest frame relay information field for this PVC end-point in the ingress direction (into the frame relay network). The value of frPVCEndptInMaxFrameSize must be less than or equal to the correspond ...

frPVCEndptInBc

The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC end-point in the ingress direction (into the frame relay network).

frPVCEndptInBe

The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC end-point in the ingress direction (into the frame relay network).

frPVCEndptInCIR

The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC end- point in the ingress direction (into the frame relay network).

frPVCEndptOutMaxFrameSize

The value of this object is the size in octets of the largest frame relay information field for this PVC end-point in the egress direction (out of the frame relay network). The value of frPVCEndptOutMaxFrameSize must be less than or equal to the correspo ...

frPVCEndptOutBc

The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC end-point in the egress direction (out of the frame relay network).

frPVCEndptOutBe

The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC end-point in the egress direction (out of the frame relay network).

frPVCEndptOutCIR

The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC end- point in the egress direction (out of the frame relay network).

frPVCEndptConnectIdentifier

This object is used to associate PVC end-points as being part of one PVC segment connection. This value of this object is equal to the value of frPVCConnectIndex, which is used as one of the indices into the frPVCConnectTable. The value of this object i ...

frPVCEndptRowStatus

This object is used to create new rows in this table, modify existing rows, and to delete existing rows. To create a new PVC, the entries for the PVC segment end-points in the frPVCEndptTable must first be created. Next, the frPVCConnectTable is used to ...

frPVCEndptRcvdSigStatus

The value of this object identifies the PVC status received via the local in-channel signaling procedures for this PVC end-point. This object is only pertinent for interfaces that perform the bidirectional procedures. For user-to-network network side pr ...

frPVCEndptInFrames

The number of frames received by the network (ingress) for this PVC end-point. This includes any frames discarded by the network due to submitting more than Bc + Be data or due to any network congestion recovery procedures.

frPVCEndptOutFrames

The number of frames sent by the network (egress) regardless of whether they are Bc or Be frames for this PVC end-point.

frPVCEndptInDEFrames

The number of frames received by the network (ingress) with the DE bit set to (1) for this PVC end-point.

frPVCEndptInExcessFrames

The number of frames received by the network (ingress) for this PVC end-point which were treated as excess traffic. Frames which are sent to the network with DE set to zero are treated as excess when more than Bc bits are submitted to the network during ...

frPVCEndptOutExcessFrames

The number of frames sent by the network (egress) for this PVC end-point which were treated as excess traffic. (The DE bit may be set to one.)

frPVCEndptInDiscards

The number of frames received by the the network (ingress) that were discarded due to traffic enforcement for this PVC end-point.

frPVCEndptInOctets

The number of octets received by the network (ingress) for this PVC end-point. This counter should only count octets from the beginning of the frame relay header field to the end of user data. If the network supporting Frame Relay can not count octets, t ...

frPVCEndptOutOctets

The number of octets sent by the network (egress) for this PVC end-point. This counter should only count octets from the beginning of the frame relay header field to the end of user data. If the network supporting Frame Relay can not count octets, then ...

frPVCConnectIndexValue

This object contains an appropriate value to be used for frPVCConnectIndex when creating entries in the frPVCConnectTable. The value 0 indicates that no unassigned entries are available. To obtain the frPVCConnectIndex value for a new entry, the manager ...

frPVCConnectTable

The Frame Relay PVC Connect table. A bi- directional PVC segment is modeled as one entry in this table.

frPVCConnectEntry

An entry in the Frame Relay PVC Connect table. This entry is used to model a PVC segment in two directions.

frPVCConnectIndex

The value of this object is equal to the frPVCConnectIndexValue obtained to uniquely identify this PVC segment connection.

frPVCConnectLowIfIndex

The value of this object is equal to MIB II's ifIndex value of the UNI/NNI logical port for this PVC segment. The term low implies that this PVC segment end-point has the numerically lower ifIndex value than the connected/associated PVC segment end-point ...

frPVCConnectLowDLCIIndex

The value of this object is equal to the DLCI value for this end-point of the PVC segment. If the value is equal to zero, then this endpoint of the PVC segment is not a Frame Relay connection.

frPVCConnectHighIfIndex

The value of this object is equal to MIB II's ifIndex value for the UNI/NNI logical port for this PVC segment. The term high implies that this PVC segment end-point has the numerically higher ifIndex value than the connected/associated PVC segment end-po ...

frPVCConnectHighDLCIIndex

The value of this object is equal to the egress DLCI value for this end-point of the PVC segment.

frPVCConnectAdminStatus

The value of this object identifies the desired administrative status of this bi-directional PVC segment. The active state means the PVC segment is currently operational; the inactive state means the PVC segment is currently not operational; the testing ...

frPVCConnectL2hOperStatus

The value of this object identifies the current operational status of the PVC segment connection in one direction; (i.e., in the low to high direction). The active state means it is currently operational; the inactive state means it is currently not oper ...

frPVCConnectH2lOperStatus

The value of this object identifies the current operational status of the PVC segment connection in one direction; (i.e., in the high to low direction). The active state means it is currently operational; the inactive state means it is currently not oper ...

frPVCConnectL2hLastChange

The value of MIB II's sysUpTime object at the time this PVC segment entered its current operational state in the low to high direction. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a ze ...

frPVCConnectH2lLastChange

The value of MIB II's sysUpTime object at the time this PVC segment entered its current operational state in the high to low direction. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a ze ...

frPVCConnectRowStatus

The status of this entry in the frPVCConnectTable. This variable is used to create new connections for the PVC end-points and to change existing connections of the PVC end- points. This object must be initially set to `createAndWait'. In this state, th ...

frAccountPVCTable

The Frame Relay Accounting PVC table. This table is used to perform accounting on a PVC segment end-point basis.

frAccountPVCEntry

An entry in the Frame Relay Accounting PVC table.

frAccountPVCDLCIIndex

The value of this object is equal to the DLCI value for this PVC segment end-point.

frAccountPVCSegmentSize

The value of this object is equal to the Segment Size for this PVC segment end-point.

frAccountPVCInSegments

The value of this object is equal to the number of segments received by this PVC segment end- point.

frAccountPVCOutSegments

The value of this object is equal to the number of segments sent by this PVC segment end-point.

frAccountLportTable

The Frame Relay Accounting Logical Port table. This table is used to perform accounting on a UNI/NNI Logical Port basis.

frAccountLportEntry

An entry in the Frame Relay Accounting Logical Port table.

frAccountLportSegmentSize

The value of this object is equal to the Segment Size for this UNI/NNI logical port.

frAccountLportInSegments

The value of this object is equal to the number of segments received by this UNI/NNI logical port.

frAccountLportOutSegments

The value of this object is equal to the number of segments sent by this UNI/NNI logical port.

frnetservLportGroup

A collection of objects providing information applicable to a Frame Relay Logical Port.

frnetservMgtVCSigGroup

A collection of objects providing information applicable to the Local In-Channel Signaling Procedures used for a UNI/NNI logical port.

frnetservPVCEndptGroup

A collection of objects providing information application to a Frame Relay PVC end-point.

frnetservPVCConnectGroup

A collection of objects providing information applicable to a Frame Relay PVC connection.

frnetservAccountPVCGroup

A collection of objects providing accounting information application to a Frame Relay PVC end-point.

frnetservAccountLportGroup

A collection of objects providing accounting information application to a Frame Relay logical port.