The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for admin port speed
- tsm Admin Port Ring Speed
- tsmAdminPortRingSpeed 1.3.6.1.4.1.800.2.19.1.1.1.1.7 (defined in TSMEXT-MIB)
The configured ring speed of the port. 1 = auto. Automatically set the port's ring speed. 2 = fourMegabit. Always set the port's ring speed at four megabits. 3 = sixteenMegabit. Always set the port's ring speed at sixteen megabits. This object may ONLY be set if the value of port's tsmAdminPortConfigType is fixed(1). - Switch Port Management Speed Dpx Admin
- swPortMgtSpeedDpxAdmin 1.3.6.1.4.1.52.3.9.1.10.7.2.1.1.3 (defined in els100-s24tx2m-mib)
Set the port speed and duplex mode as follows: halfDuplex10(1) - 10Mbps and half duplex mode fullDuplex10(2) - 10Mbps and full duplex mode halfDuplex100(3) - 100Mbps and half duplex mode fullDuplex100(4) - 100Mbps and full duplex mode halfDuplex1000(5) - 1000Mbps and half duplex mode fullDuplex1000(6) - 1000Mbps and full duplex mode autoNegotiation(7) - let the switch to negotiate with the other end of connection. hundredBaseTX port can be set as halfDuplex10(1) fullDuplex10(2) halfDuplex100(3) fullDuplex100(4) autoNegotiation(7) hundredBaseFX port can be set as halfDuplex100(3) fullDuplex100(4) thousandBaseSX port can be set as halfDuplex1000(5) fullDuplex1000(6) autoNegotiation(7) The actual operating speed and duplex of the port is given by swPortMgtSpeedDpxInUse. - port Physical X25 Admin Speed
- portPhyX25AdminSpeed 1.3.6.1.4.1.173.7.3.1.1.1.2 (defined in netlink-specific-mib)
This object defines the speed of the X25 port. The speed may only be set to one of a series of reasonable values, and if an attempt is made to set the speed to a value which is within the valid range but not equal to one of these values, the speed will be rounded up. If the connector type of the port is RS232, the port could be a standard port or a high speed port. If the port is a high speed RS232 port, the maximum valid speed is 256000. If the port is a standard RS232 port, the maximum valid speed is 64000 on the FRX4000/SS1840 and 19200 on all other products. It may be possible to set the speed of a standard RS232 port to a speed which is valid for a high speed RS232 port but invalid for a standard RS232 port. In this case, the port may not end up having the invalid speed. The default speed for a standard RS232 port on the FRX6000 is 19200. - port Bsci Admin Speed
- portBsciAdminSpeed 1.3.6.1.4.1.173.7.3.4.1.1.3 (defined in netlink-specific-mib)
Data transmission rate in bits per second. - port Sdlc Admin Speed
- portSdlcAdminSpeed 1.3.6.1.4.1.173.7.3.5.1.1.12 (defined in netlink-specific-mib)
This object defines the speed of the SDLC port. The speed may only be set to one of a series of reasonable values, and if an attempt is made to set the speed to a value which is within the valid range but not equal to one of these values, the speed will be rounded up. If the connector type of the port is RS232, the port could be a standard port or a high speed port. If the port is a high speed RS232 port, the maximum valid speed is 256000. If the port is a standard RS232 port, the maximum valid speed is 64000 on the FRX4000/SS1840 and 19200 on all other products. It may be possible to set the speed of a standard RS232 port to a speed which is valid for a high speed RS232 port but invalid for a standard RS232 port. In this case, the port may not end up having the invalid speed. The default speed for a standard RS232 port on the FRX6000 is 19200. - port Voice Admin Speed
- portVoiceAdminSpeed 1.3.6.1.4.1.173.7.3.8.1.1.4 (defined in netlink-specific-mib)
The speed of the port which is transmitted as part of a Call Setup frame. A Voice call will be established if there is enough bandwidth at each end to provide the minimum configured rate. - Cisco 2900 Port Admin Speed
- c2900PortAdminSpeed 1.3.6.1.4.1.9.9.87.1.4.1.1.33 (defined in CISCO-C2900-MIB)
The object controls the speed of the port. The current operational speed of the port can be determined from ifSpeed. - Cisco Network Office Switch Port Speed Admin
- cnosPortSpeedAdmin 1.3.6.1.4.1.9.10.43.1.3.1.1.5 (defined in CISCO-CNO-SWITCH-MIB)
Set to tenMbps(1) to operate in 10Mbps speed mode. Set to oneHundredMbps(2) to operate in 100Mbps speed mode. Set to autoNegotiate(3) to allow the switch to negotiate with the other end of the connection.
