The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for connection id
- Xylan ATM Vp Cross Connect Connection Id
- xylnatmVpCrossConnectConnectionId 1.3.6.1.4.1.800.2.9.1.14.1.1.7 (defined in XYLAN-CSM-MIB)
The status of this object indicates whether the said Vc Cross Connection is the parent or a child. If the connection status is unknown, then the value of this object is unknown. Only deletion of the parent is possible when all the child connections have been disconnected. To delete all all parent and child connections, use the VCL table to delete the low VCL. - Xylan ATM Vc Cross Connect Connection Id
- xylnatmVcCrossConnectConnectionId 1.3.6.1.4.1.800.2.9.1.13.1.1.9 (defined in XYLAN-CSM-MIB)
The status of this object indicates whether the said Vc Cross Connection is the parent or a child. If the connection status is unknown, then the value of this object is unknown. Only deletion of the parent is possible when all the child connections have been disconnected. To delete all all parent and child connections, use the VCL table to delete the low VCL. - Character Session Connection Id
- charSessConnectionId 1.3.6.1.2.1.19.3.1.9 (defined in rfc1316)
A reference to additional local MIB information. This should be the highest available related MIB, corresponding to charSessProtocol, such as Telnet. For example, the value for a TCP connection (in the absence of a Telnet MIB) is the object identifier of tcpConnState. If an agent is not configured to have such values, the agent returns the object identifier: nullConnectionId OBJECT IDENTIFIER ::= { 0 0 } ::= { charSessEntry 9 } SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION The value of sysUpTime in MIB-2 when the session entered connecting state. - Character Session Connection Id
- charSessConnectionId 1.3.6.1.2.1.19.3.1.9 (defined in rfc1658)
A reference to additional local MIB information. This should be the highest available related MIB, corresponding to charSessProtocol, such as Telnet. For example, the value for a TCP connection (in the absence of a Telnet MIB) is the object identifier of tcpConnState. If an agent is not configured to have such values, the agent returns the object identifier: nullConnectionId OBJECT IDENTIFIER ::= { 0 0 } ::= { charSessEntry 9 } SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION The value of sysUpTime in MIB-2 when the session entered connecting state. - adsp Connection Local Connection ID
- adspConnLocalConnID 1.3.6.1.2.1.13.13.9.1.2 (defined in rfc1742)
The local Connection ID of this ADSP connection. If this entry specifies an ADSP listener, this value shall be zero. - adsp Connection Remote Connection ID
- adspConnRemoteConnID 1.3.6.1.2.1.13.13.9.1.4 (defined in rfc1742)
The remote Connection ID of this ADSP connection. If this entry specifies an ADSP listener, this value shall be zero. - Cabletron FDDINM Connection ID
- ctFDDINMConnectionID 1.3.6.1.4.1.52.4.1.2.5.1.2.3.1.2 (defined in ctron-fddi-fnb-mib)
Describes a specific connection identifier. Valid connection identifiers are defined by the third sub-identifier in ctFDDINMConfig as identified by ctFDDINMCapEnable. - Cabletron Nat Connection Statistics ID
- ctNatConnStatsID 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.1 (defined in ctron-nat-mib)
A unique value identifying an element in a sequence of active connections which belong to the NAT Connection Statistics Group. - bsci Subscr Operation Connection ID
- bsciSubscrOperConnectionID 1.3.6.1.4.1.173.7.3.4.4.1.7 (defined in netlink-specific-mib)
configured in the BSCI Devices Table. - bsci Device Admin Connection ID
- bsciDevAdminConnectionID 1.3.6.1.4.1.173.7.3.4.5.1.3 (defined in netlink-specific-mib)
The BSCI port connection ID for the device. - Net Link Llc2 Termination Connection Local Subscriber Id
- nlLlc2TermConnectionLocalSubscriberId 1.3.6.1.4.1.173.7.6.2.1.3 (defined in netlink-specific-mib)
LLC2 Host Connection's Local Subscriber Id - ssh Connection ID
- sshConnID 1.3.6.1.4.1.52.4.12.30.1.17.6.6.1.1 (defined in v2h124-24-mib)
The connection ID of the Secure Shell Connection. - Cisco's Airline protocol support Remote Peer Connection Id String
- alpsRemPeerConnIdString 1.3.6.1.4.1.9.9.95.1.2.4.1.2 (defined in CISCO-ALPS-MIB)
A descriptive ASCII string that is used to distinguish among different peer connections to the same ALPS remote peer IP address. - Cisco's Airline protocol support Circuit Base Current Peer Connection Id
- alpsCktBaseCurrPeerConnId 1.3.6.1.4.1.9.9.95.1.3.1.1.24 (defined in CISCO-ALPS-MIB)
A descriptive ASCII string that is used to distinguish among different peer connections to the same ALPS remote peer IP address. - Cisco Cdma Fail Session Connection Id
- cCdmaFailSessionConnId 1.3.6.1.4.1.9.9.157.1.4.1.1.7 (defined in CISCO-CDMA-PDSN-MIB)
Connection ID of the failed session. - Cisco Cdma Registration Update Ack Invalid Connection ID Errors
- cCdmaRegUpdAckInvConnectionIDErrs 1.3.6.1.4.1.9.9.157.1.10.2.5 (defined in CISCO-CDMA-PDSN-MIB)
Invalid Connection ID in the Registration Update Ack since system was last restarted - Cisco Cdma Session Update Ack Invalid Connection ID Errors
- cCdmaSessUpdAckInvConnectionIDErrs 1.3.6.1.4.1.9.9.157.1.10.3.5 (defined in CISCO-CDMA-PDSN-MIB)
Invalid Connection ID in the Session Update Ack since system was last restarted - CISCO Express Forwarding Adjacency Connection Id
- cefAdjConnId 1.3.6.1.4.1.9.9.492.1.2.2.1.3 (defined in CISCO-CEF-MIB)
In cases where cefLinkType, interface and the next hop address are not able to uniquely define an adjacency entry (e.g. ATM and Frame Relay Bundles), this object is a unique identifier to differentiate between these adjacency entries. In all the other cases the value of this index object will be 0. - CISCO Express Forwarding FE Selection Adjacency Connection Id
- cefFESelectionAdjConnId 1.3.6.1.4.1.9.9.492.1.3.1.1.9 (defined in CISCO-CEF-MIB)
This object represent the connection id for the adjacency associated with this forwarding Element List. The value of this object will be irrelevant and will be set to zero if the forwarding element list doesn't contain an adjacency forwarding element. In cases where cefFESelectionAdjLinkType, interface and the next hop address are not able to uniquely define an adjacency entry (e.g. ATM and Frame Relay Bundles), this object is a unique identifier to differentiate between these adjacency entries. - cisco Data Link Switching T Connection Operation Partner Vendor ID
- ciscoDlswTConnOperPartnerVendorID 1.3.6.1.4.1.9.10.9.1.2.3.1.10 (defined in CISCO-DLSW-MIB)
This value identifies the IEEE-assigned organizationally Unique Identifier (OUI) of the maker of this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep ciscoDlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged. - Cisco Ethernet Virtual Connection Evc Uni Id
- cevcEvcUniId 1.3.6.1.4.1.9.9.613.1.3.3.1.2 (defined in CISCO-EVC-MIB)
This object indicates the string-value identifying the UNI that is in the EVC. For UNI that is local, this value is the same as cevcUniIdentifier for the same ifIndex value as cevcEvcLocalUniIfIndex. For UNI that is not on the system, this value may be derived from the underlying OAM protocol. If the UNI identifier value is not specified for the UNI or it is unknown, the value of the cevcEvcUniId column is a zero-length string. - Cisco Frame Relay Connection ID
- cfrConnID 1.3.6.1.4.1.9.9.49.1.7.1.1.2 (defined in CISCO-FRAME-RELAY-MIB)
The numerical identifier of a FR/FR or FR/ATM Network/Service Interworking connection. - Cisco Visual H320 Call History Connection Id
- cvH320CallHistoryConnectionId 1.3.6.1.4.1.9.10.128.1.1.1.1.1 (defined in CISCO-H320-DIAL-CONTROL-MIB)
The global call identifier for a H.320 call. - Cisco Visual H320 Call Active Connection Id
- cvH320CallActiveConnectionId 1.3.6.1.4.1.9.10.128.1.2.1.1.1 (defined in CISCO-H320-DIAL-CONTROL-MIB)
The global call identifier for a H.320 call. - Cisco Dial Control H324 Call History Connection Id
- cH324CallHistoryConnectionId 1.3.6.1.4.1.9.9.621.1.1.1.1.1 (defined in CISCO-H324-DIAL-CONTROL-MIB)
The global call identifier for the H.324 call. - Cisco Dial Control H324 Call Active Connection Id
- cH324CallActiveConnectionId 1.3.6.1.4.1.9.9.621.1.2.1.1.1 (defined in CISCO-H324-DIAL-CONTROL-MIB)
The global call identifier for the H.324 call. - tn3270e Tcp Connection Id
- tn3270eTcpConnId 1.3.6.1.2.1.34.8.1.9.1.14 (defined in ibm-tn3270e)
The connection identifier associated with a TN3270 or a TN3270E session's TCP connection. - tn3270e Tcp Connection Client Id
- tn3270eTcpConnClientId 1.3.6.1.2.1.34.8.1.9.1.16 (defined in ibm-tn3270e)
Additional client identification information whose content is defined by the corresponding value of tn3270eTcpConnClientIdFormat.
