The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for hello interval
- PNNIx Node Hello Interval
- pnnixNodeHelloInterval 1.3.6.1.4.1.800.3.2.1.1.1.4.1.3 (defined in XPNNI-MIB)
The initial value for the Hello Timer. In the absence of triggered Hellos, this node will send one Hello packet on each of its ports on this interval. - egp Neighbor Interval Hello
- egpNeighIntervalHello 1.3.6.1.2.1.8.5.1.12 (defined in rfc1213)
The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904. - ospf If Hello Interval
- ospfIfHelloInterval 1.3.6.1.2.1.14.7.1.9 (defined in rfc1253)
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. - ospf Virtual If Hello Interval
- ospfVirtIfHelloInterval 1.3.6.1.2.1.14.9.1.5 (defined in rfc1253)
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. - ospf If Hello Interval
- ospfIfHelloInterval 1.3.6.1.2.1.14.7.1.9 (defined in rfc1850)
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network. - ospf Virtual If Hello Interval
- ospfVirtIfHelloInterval 1.3.6.1.2.1.14.9.1.5 (defined in rfc1850)
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. - vlan Sflsp Interfaces Hello Interval
- vlanSflspInterfacesHelloInterval 1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.9 (defined in ctron-sfps-sflsp-mib)
The lenght of time, in seconds, between the Hello packets that the switch sends on the interface. This value must be the same for all switches attached to a common network. - Enterasys Dvmrp Ext If Hello Interval
- etsysDvmrpExtIfHelloInterval 1.3.6.1.4.1.5624.1.2.69.1.2.1.1.5 (defined in enterasys-dvmrp-ext-mib)
The transmit frequency of DVMRP Hello messages on this interface. A value of 0 represents an infinite interval and periodic DVMRP Hello messages SHOULD not be sent on this interface. - Cisco Enhanced Interior Gateway Protocol Hello Interval
- cEigrpHelloInterval 1.3.6.1.4.1.9.9.449.1.5.1.1.11 (defined in CISCO-EIGRP-MIB)
The configured time interval between Hello packet transmissions for this interface. - Cisco Fabric Shortest Path First If Hello Interval
- fspfIfHelloInterval 1.3.6.1.4.1.9.9.287.1.2.1.2 (defined in CISCO-FSPF-MIB)
Interval between the periodic HELLO messages sent on this interface on this VSAN to verify the link health. Note that this value must be same on both the interfaces on each end of the link on this VSAN. - Juniper L2tp Tunnel Stats Hello Interval
- jnxL2tpTunnelStatsHelloInterval 1.3.6.1.4.1.2636.3.49.1.1.3.1.17 (defined in JNX-L2TP-MIB)
This object contains the hello interval for this tunnel. - Juniper Ospfv3 If Hello Interval
- jnxOspfv3IfHelloInterval 1.3.6.1.4.1.2636.5.4.1.1.7.1.9 (defined in JUNIPER-OSPFV3-MIB)
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. - Juniper Ospfv3 Virtual If Hello Interval
- jnxOspfv3VirtIfHelloInterval 1.3.6.1.4.1.2636.5.4.1.1.8.1.7 (defined in JUNIPER-OSPFV3-MIB)
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. - Switch L3ospf Virtual If Hello Interval
- swL3ospfVirtIfHelloInterval 1.3.6.1.4.1.171.11.70.5.3.7.1.5 (defined in DES3528-SWL3MGMT-MIB)
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. - Switch L3ospf If Hello Interval
- swL3ospfIfHelloInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.9 (defined in DES3528-SWL3MGMT-MIB)
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network. - Switch L3ospf Virtual If Hello Interval
- swL3ospfVirtIfHelloInterval 1.3.6.1.4.1.171.11.70.5.3.7.1.5 (defined in DES3552-SWL3MGMT-MIB)
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. - Switch L3ospf If Hello Interval
- swL3ospfIfHelloInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.9 (defined in DES3552-SWL3MGMT-MIB)
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network. - Switch L3ospf Virtual If Hello Interval
- swL3ospfVirtIfHelloInterval 1.3.6.1.4.1.171.11.70.5.3.7.1.5 (defined in DES3612-SWL3MGMT-MIB)
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. - Switch L3ospf If Hello Interval
- swL3ospfIfHelloInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.9 (defined in DES3612-SWL3MGMT-MIB)
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network. - Switch L3ospf Virtual If Hello Interval
- swL3ospfVirtIfHelloInterval 1.3.6.1.4.1.171.11.70.5.3.7.1.5 (defined in DES3627-SWL3MGMT-MIB)
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. - Switch L3ospf If Hello Interval
- swL3ospfIfHelloInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.9 (defined in DES3627-SWL3MGMT-MIB)
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network. - Switch L3ospf Virtual If Hello Interval
- swL3ospfVirtIfHelloInterval 1.3.6.1.4.1.171.11.70.5.3.7.1.5 (defined in DES3650-SWL3MGMT-MIB)
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. - Switch L3ospf If Hello Interval
- swL3ospfIfHelloInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.9 (defined in DES3650-SWL3MGMT-MIB)
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network. - Switch Pim Info Hello Interval
- swPimInfoHelloInterval 1.3.6.1.4.1.171.12.52.2.3.1.5 (defined in PIM-SM-MIB)
The frequency at which PIM Hello messages are transmitted on this interface. - Switch L3ospf Virtual If Hello Interval
- swL3ospfVirtIfHelloInterval 1.3.6.1.4.1.171.11.70.5.3.7.1.5 (defined in SWL3MGMT-MIB)
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. - Switch L3ospf If Hello Interval
- swL3ospfIfHelloInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.9 (defined in SWL3MGMT-MIB)
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network.
