The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for history time
- ping Probe History Time
- pingProbeHistoryTime 1.3.6.1.2.1.80.1.4.1.5 (defined in ZYXEL-ES3124-MIB)
Timestamp for when this probe result was determined. - ping Probe History Time
- pingProbeHistoryTime 1.3.6.1.2.1.80.1.4.1.5 (defined in ZYXEL-ES3124PWR-MIB)
Timestamp for when this probe result was determined. - fault History Alarm Set Time
- faultHistoryAlarmSetTime 1.3.6.1.4.1.43.1.12.3.1.1.6.4.1.7 (defined in 3comab9300)
The time when the alarm was set. - fault History Alarm Clear Time
- faultHistoryAlarmClearTime 1.3.6.1.4.1.43.1.12.3.1.1.6.4.1.9 (defined in 3comab9300)
The time when the alarm was cleared. - token Ring Mac-Layer History Beacon Time
- tokenRingMLHistoryBeaconTime 1.3.6.1.2.1.16.2.3.1.10 (defined in rfc1513)
The amount of time that the ring has been in the beaconing state during this sampling interval. - Cabletron Ppp Lcp Ext Mp History Time
- ctPppLcpExtMpHistoryTime 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.3 (defined in ctron-remote-access-mib)
Used to set the history time value in seconds for the number of line utilization reading(s) desired to compute the average line utilization. That is to say, it specifies the window size over which to compute the average line utilization. - sfps ATM Service History Event Time
- sfpsATMSvcHistoryEventTime 1.3.6.1.4.1.52.4.2.4.2.4.8.2.1.1.9 (defined in ctron-sfps-esys-mib)
system time when Event occurs - sfps History Topology Server Sys Time
- sfpsHistoryTopologyServerSysTime 1.3.6.1.4.1.52.4.2.4.2.2.3.7.7.1.12 (defined in ctron-sfps-topology-mib)
systime of switch - rbtws Client Session Roam History Time Stamp
- rbtwsClSessRoamHistTimeStamp 1.3.6.1.4.1.52.4.15.1.4.4.1.1.2.1.8 (defined in rbtws-client-session-mib)
The difference between the time the session was created on the roamed-to switch and the time the last switch, the one where the user is at currently, started. The timestamp unit is in hundredths of seconds. - Enterasys Spanning Tree Diagnostic Root History Date And Time
- etsysStpDiagRootHistoryDateAndTime 1.3.6.1.4.1.5624.1.2.29.1.6.1.1.4 (defined in enterasys-spanning-tree-diagnostic-mib)
The date and time that this bridge became root. - ADSL2 Performance Monitoring L History Init15 M Monitored Time
- adsl2PMLHistInit15MMonitoredTime 1.3.6.1.2.1.10.238.1.4.1.5.1.2 (defined in ADSL2-LINE-MIB)
Total seconds monitored in this interval. - car Switch History Event Time
- carSWHistEventTime 1.3.6.1.4.1.9.9.458.1.2.5.1.6 (defined in CISCO-APPLIANCE-REDUNDANCY-MIB)
The local date and time when the switchover event occurred and was logged to the system. - cisco Call History Start Time
- ciscoCallHistoryStartTime 1.3.6.1.4.1.9.9.27.1.1.3.1.1 (defined in CISCO-CALL-HISTORY-MIB)
The value of sysUpTime when this call history entry was created. This will be useful for an NMS to retrieve all calls after a specific time. - cisco Call History Call Connection Time
- ciscoCallHistoryCallConnectionTime 1.3.6.1.4.1.9.9.27.1.1.3.1.9 (defined in CISCO-CALL-HISTORY-MIB)
The value of sysUpTime when the call was connected. - cisco Call History Call Disconnect Time
- ciscoCallHistoryCallDisconnectTime 1.3.6.1.4.1.9.9.27.1.1.3.1.10 (defined in CISCO-CALL-HISTORY-MIB)
The value of sysUpTime when the call got disconnected last. - cisco Call History Connect Time Of Day
- ciscoCallHistoryConnectTimeOfDay 1.3.6.1.4.1.9.9.27.1.1.3.1.12 (defined in CISCO-CALL-HISTORY-MIB)
The time of day at the time of call connect. - cisco Call History Disconnect Time Of Day
- ciscoCallHistoryDisconnectTimeOfDay 1.3.6.1.4.1.9.9.27.1.1.3.1.13 (defined in CISCO-CALL-HISTORY-MIB)
The time of day when the call disconnected. - Cisco Cdma Fail History Fail Time
- cCdmaFailHistFailTime 1.3.6.1.4.1.9.9.157.1.4.1.1.9 (defined in CISCO-CDMA-PDSN-MIB)
Date and time of the failure occurrence. - Cisco Content Engine Alarm History Time Stamp
- cceAlarmHistTimeStamp 1.3.6.1.4.1.9.9.178.1.6.1.2.1.8 (defined in CISCO-CONTENT-ENGINE-MIB)
This object specifies the value of the sysUpTime object at the time the alarm was generated. - Cisco Configuration Management History Event Time
- ccmHistoryEventTime 1.3.6.1.4.1.9.9.43.1.1.6.1.2 (defined in CISCO-CONFIG-MAN-MIB)
The value of sysUpTime when the event occurred. - Cisco Call History Setup Time
- cCallHistorySetupTime 1.3.6.1.4.1.9.10.25.1.4.3.1.2 (defined in CISCO-DIAL-CONTROL-MIB)
The value of sysUpTime when the call setup was started. This will be useful for an NMS to sort the call history entry with call setup time. Also, this object can be useful in finding large delays between the time the call was started and the time the call was connected. For ISDN media, this will be the time when the setup message was received from or sent to the network. The value of this object is the same as callActiveSetupTime in the callActiveTable - Cisco Call History Connect Time
- cCallHistoryConnectTime 1.3.6.1.4.1.9.10.25.1.4.3.1.10 (defined in CISCO-DIAL-CONTROL-MIB)
The value of sysUpTime when the call was connected. - Cisco Call History Disconnect Time
- cCallHistoryDisconnectTime 1.3.6.1.4.1.9.10.25.1.4.3.1.11 (defined in CISCO-DIAL-CONTROL-MIB)
The value of sysUpTime when the call was disconnected. - Cisco Entity Sensor History Collection Interval Time
- ceshCollectionIntervalTime 1.3.6.1.4.1.9.9.768.0.1.1.1 (defined in CISCO-ENTITY-SENSOR-HISTORY-MIB)
This object indicates the length of the sampling interval for the collection. - Cisco Entity Sensor History Collection Elapsed Time
- ceshCollectionElapsedTime 1.3.6.1.4.1.9.9.768.0.1.1.5 (defined in CISCO-ENTITY-SENSOR-HISTORY-MIB)
This object indicates the time that has elapsed since the beginning of the current interval. - Cisco Entity Sensor History Collection Interval Time Stamp
- ceshCollectionIntervalTimeStamp 1.3.6.1.4.1.9.9.768.0.2.1.3 (defined in CISCO-ENTITY-SENSOR-HISTORY-MIB)
This object indicates the value of sysUpTime when the system sampled the corresponding sensor.
