The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for link change
- sna Node Link Admin Table Last Change
- snaNodeLinkAdminTableLastChange 1.3.6.1.2.1.34.1.1.7 (defined in rfc1666)
The timestamp (e.g., the Agent's sysUpTime value) at the last change made to any object in the snaNodeLinkAdminTable, including row deletions/additions (i.e., changes to the snaNodeLinkAdminRowStatus object). This object can be used to reduce frequent retrievals of the snaNodeLinkAdminTable by a Management Station. It is expected that a Management Station will periodically poll this object and compare its current value with the previous one. A difference indicates that some Node operational information has been changed. Only then will the Management Station retrieve the entire table. - sna Node Link Operation Table Last Change
- snaNodeLinkOperTableLastChange 1.3.6.1.2.1.34.1.1.9 (defined in rfc1666)
The timestamp of the last change made to any object in the snaNodeLinkOperTable, including row deletions/additions. This object can be used to reduce frequent retrievals of the snaNodeLinkOperTable by a Management Station. It is expected that a Management Station will periodically poll this object and compare its current value with the previous one. A difference indicates that some Node operational information has been changed. Only then will the Management Station retrieve the entire table. - Enterasys If Operation State Link Change
- etsysIfOperStateLinkChange 1.3.6.1.4.1.5624.1.2.57.1.1.1 (defined in enterasys-if-mib-ext-mib)
This object controls the system wide ability to manipulate the physical link state of an interface when the interface's ifOperStatus transitions into or out of the down(2) state. A value of enabled(1) will cause an interface to drop physical link when its ifOperStatus transitions to down(2). If the interface would transition out of the down(2) state, assuming it did have link, then physical link will be restored to the interface. A value of disabled(2) will cause an interface to not alter its physical link regardless of the value of ifOperStatus. This object only affects those interfaces which have a concept of physical link. - Cisco Flex Link Enable Status Change Notification
- cflEnableStatusChangeNotif 1.3.6.1.4.1.9.9.471.1.1.2 (defined in CISCO-FLEX-LINKS-MIB)
This variable indicates whether the system produces the cflIfStatusChangeNotif. A value of 'false' will prevent cflIfStatusChangeNotif. - jnx Ppp Summary Ppp Link If Last Change Time
- jnxPppSummaryPppLinkIfLastChangeTime 1.3.6.1.4.1.2636.3.68.1.1.7.25 (defined in JNX-PPP-MIB)
The value of the sysUpTime at the time of the last PPP Link interface creation or deletion in the system. If the number of PPP interfaces has been unchanged since the last re-initialization of the system, then this object contains a zero value. - Switch L2 Device Alarm Link Change
- swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.70.5.2.1.3.3 (defined in DES3528-L2MGMT-MIB)
This object determines whether or not to send a trap message when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its ports link change. The device does not send the trap if this object value is disabled or other. - Switch L2 Device Alarm Link Change
- swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.70.5.2.1.3.3 (defined in DES3552-L2MGMT-MIB)
This object determines whether or not to send a trap message when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its ports link change. The device does not send the trap if this object value is disabled or other. - Switch L2 Device Alarm Link Change
- swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.70.5.2.1.3.3 (defined in DES6500-SWL2MGMT-MIB)
This object determine to send a trap or not when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its ports link change. The device doesn't send the trap if this object value is disabled or other. - Switch L2 Device Alarm Link Change
- swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.70.5.2.1.3.3 (defined in DGS3627-L2MGMT-MIB)
This object determine to send a trap or not when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its ports link change. The device doesn't send the trap if this object value is disabled or other. - Switch L2 Device Alarm Link Change
- swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.70.5.2.1.3.3 (defined in DGS3650-L2MGMT-MIB)
This object determine to send a trap or not when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its ports link change. The device doesn't send the trap if this object value is disabled or other. - Switch L2 Device Alarm Link Change
- swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.70.5.2.1.3.3 (defined in DGS3200-L2MGMT-MIB)
This object determines whether or not to send a trap message when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its ports link change. The device does not send the trap if this object value is disabled or other.
