The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for memory allocation
- number Of Failed Memory Allocation Attempts
- numberOfFailedMemoryAllocAttempts 1.3.6.1.4.1.23.2.10.1.29 (defined in NetWare-Server-Alarm-MIB)
Number of failed memory requests. - Compaq Standard PC Server Equipment Eisa Memory Allocation Index
- cpqSeEisaMemAllocIndex 1.3.6.1.4.1.232.1.2.5.3.1.3 (defined in CPQSTDEQ)
The index for this memory allocation entry in the EISA function block. - Cisco Enhanced Memory Pool Allocation Hit
- cempMemPoolAllocHit 1.3.6.1.4.1.9.9.221.1.1.1.1.12 (defined in CISCO-ENHANCED-MEMPOOL-MIB)
Indicates the number of successful allocations from the memory pool - Cisco Enhanced Memory Pool Allocation Miss
- cempMemPoolAllocMiss 1.3.6.1.4.1.9.9.221.1.1.1.1.13 (defined in CISCO-ENHANCED-MEMPOOL-MIB)
Indicates the number of unsuccessful allocations from the memory pool - lp Arc Tx Frame Memory Allocation
- lpArcTxFrameMemoryAllocation (defined in Nortel-Magellan-Passport-AtmBaseMIB)
This attribute is migrated to the Lp/n Eng Arc Ov attribute txCellMemoryAllocation. It is converted from frame percentage to cell percentage by subtracting this value from 100. This attribute specifies the percentage of the transmit CQM memory which should be allocated to the transmit frame free list on the ATM-FP. The remaining transmit CQM memory is allocated to the transmit cell free list. Frame memory is used for trunks, ATM VCC testing and for inter-card communication. There is an absolute minimum quantity of frame buffers which is required by ATM software on the FP. If the value of this attribute is smaller than the absolute minimum, the ATM software will allocate the minimum required, rather than the actual number requested. The actual percentage of the transmit CQM memory allocated to the transmit frame free list is indicated by the Aru txFrameMemoryAllocation attribute. A difference between the provisioned and the operational values may exist due to the requirement for a minimum number of frame buffers or rounding during computation within the FP. - lp Arc Rx Frame Memory Allocation
- lpArcRxFrameMemoryAllocation (defined in Nortel-Magellan-Passport-AtmBaseMIB)
This attribute is migrated to the Lp/n Eng Arc Ov attribute rxCellMemoryAllocation. It is converted from frame percentage to cell percentage by subtracting this value from 100. This attribute specifies the percentage of the receive CQM memory which should be allocated to the receive frame free list on the ATM- FP. The remaining receive CQM memory is allocated to the receive cell free list. Frame memory is used for trunks, ATM VCC testing and for inter-card communication. There is an absolute minimum quantity of frame buffers which is required by ATM software on the FP. If the value of this attribute is smaller than the absolute minimum, the ATM software will allocate the minimum required, rather than the actual number requested. The actual percentage of the receive CQM memory allocated to the receive frame free list is indicated by the Aru rxFrameMemoryAllocation attribute. A difference between the provisioned and the operational values may exist due to the requirement for a minimum number of frame buffers or rounding during computation within the FP - lp Aru Tx Frame Memory Allocation
- lpAruTxFrameMemoryAllocation (defined in Nortel-Magellan-Passport-AtmBaseMIB)
This attribute defines the percentage of the transmit CQM memory which is allocated to the transmit frame free list on the ATM-FP. The remaining transmit CQM memory is allocated to the transmit cell free list. Frame memory is used for trunks, ATM Vcc testing and for inter-card communication. - lp Aru Rx Frame Memory Allocation
- lpAruRxFrameMemoryAllocation (defined in Nortel-Magellan-Passport-AtmBaseMIB)
This attribute indicates the percentage of the receive CQM memory which is allocated to the receive frame free list on the ATM-FP. The remaining receive CQM memory is allocated to the receive cell free list. Frame memory is used for trunks, ATM Vcc testing and for inter-card communication. - lp Eng Arc Tx Cell Memory Allocation
- lpEngArcTxCellMemoryAllocation (defined in Nortel-Magellan-Passport-AtmBaseMIB)
This attribute indicates the fraction of the transmit memory which is allocated for the transmission of cells on the FP. Cell memory is used for Atm Bearer Services, ATM SVCs and ATM PVCs. The remaining transmit memory is allocated for the transmission of frames. Frame memory is used for trunks, ATM VCC testing and for inter-card communication. - lp Eng Arc Rx Cell Memory Allocation
- lpEngArcRxCellMemoryAllocation (defined in Nortel-Magellan-Passport-AtmBaseMIB)
This attribute indicates the fraction of the receive memory which is allocated for the reception of cells on the FP. Cell memory is used for Atm Bearer Services, ATM SVCS and ATM PVCS. The remaining receive memory is allocated to the reception of frame. Frame memory is used for trunks, ATM VCC testing and for inter-card communication. - lp Eng Arc Ov Tx Cell Memory Allocation
- lpEngArcOvTxCellMemoryAllocation (defined in Nortel-Magellan-Passport-AtmBaseMIB)
This attribute specifies the fraction of the transmit memory which should be allocated to the transmission of cells on an FP. The remaining memory is allocated for the transmission of frames. Frame memory is used for trunks, ATM VCC testing and for inter- card communication. Cell memory is used for Atm Bearer Service, ATM SVCs and ATM PVCs. There is an absolute minimum quantity of frame buffers which is required by ATM software on the FP. If the value of this attribute is smaller than the absolute minimum, the ATM software allocates the minimum required, rather than the actual number requested. The actual percentage of the transmit memory allocated to the transmit cell memory is indicated by the Arc txCellMemoryAllocation attribute. A difference between the provisioned and the operational values may exist due to the requirement for a minimum number of frame buffers or rounding during computation within the FP. - lp Eng Arc Ov Rx Cell Memory Allocation
- lpEngArcOvRxCellMemoryAllocation (defined in Nortel-Magellan-Passport-AtmBaseMIB)
This attribute specifies the fraction of the receive memory which should be allocated to the reception of cells on an FP. The remaining receive memory is allocated for the reception of frames. Frame memory is used for trunks, ATM VCC testing and for inter- card communication. Cell memory is used for Atm Bearer Service, ATM SVCs and ATM PVCs. There is an absolute minimum quantity of frame buffers which is required by ATM software on the FP. If the value of this attribute is smaller than the absolute minimum, the ATM software allocates the minimum required, rather than the actual number requested. The actual percentage of the receive memory allocated to the receive cell memory is indicated by the Arc rxCellMemoryAllocation attribute. A difference between the provisioned and the operational values may exist due to the requirement for a minimum number of frame buffers or rounding during computation within the FP.
