The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for minimum threshold
- Compaq Console Management Controller Threshold Minimum Temp2
- cpqCmcThresholdMinTemp2 1.3.6.1.4.1.232.153.2.2.2.2.6 (defined in CPQCMC)
Threshold value minimum temperature 2 - Compaq Console Management Controller Threshold Minimum Humidity
- cpqCmcThresholdMinHumidity 1.3.6.1.4.1.232.153.2.2.2.2.14 (defined in CPQCMC)
Threshold low value Humidity alarm - Cabletron Rate Policing Threshold Hold Minimum
- ctRatePolicingThreshHoldMin 1.3.6.1.4.1.52.4.1.2.14.7.1.3.1.4 (defined in ctron-rate-policing-mib)
The minimum rate limit value for this entry in kB per second. - Cabletron Smart Switch Router CPU Minimum Threshold
- capCPUMinThreshold 1.3.6.1.4.1.52.2501.1.270.2.1.1.9 (defined in ctron-ssr-capacity-mib)
The CPU utilization expressed as an integer percentage. This value represents the threshold minimum value for capCPUCurrentUtilization that is used to reset the threshold testing for generation of the envCPUThresholdTrap. This value is equal to 0 by default. When this value or the value of capCPUMaxThreshold is equal to 0, no envCPUThresholdTrap will be generated. - Cisco ATM QoS Queuing Parameters Class Minimum Threshold
- caqQueuingParamsClassMinThre 1.3.6.1.4.1.9.9.279.1.3.2.1.4 (defined in CISCO-ATM-QOS-MIB)
Minimum Threshold value in kbps. - Lightstream Per VC Queueing Rm Threshold Group Q Minimum Size
- lsPerVcqRmThreshGrpQMinSize 1.3.6.1.4.1.9.10.10.1.7.1.1.4 (defined in CISCO-ATM-RM-MIB)
This object reflects an explicit configuration of the minimum limit on the number of cells that may occupy connection queues that are a member of this Threshold Group. The Threshold Group at it's most congested will not limit a connection queue to fewer than this number of cells. The QMinSize must be less than or equal to the Threshold Group QMaxSize. The hardware granularity is in units of one cell. - Cisco Switch Threshold Groups Per VC Queueing Rm Threshold Group Q Minimum Size
- cgrPerVcqRmThreshGrpQMinSize 1.3.6.1.4.1.9.10.10.1.9.1.1.5 (defined in CISCO-ATM-RM-MIB)
This object reflects an explicit configuration of the minimum limit on the number of cells that may occupy connection queues that are a member of this Threshold Group. The Threshold Group at it's most congested will not limit a connection queue to fewer than this number of cells. The QMinSize must be less than or equal to the Threshold Group QMaxSize. The hardware granularity is in units of one cell. - Cisco Access Control List QoS Queue Threshold Minimum Wred Threshold
- caqQueueThreshMinWredThreshold 1.3.6.1.4.1.9.9.179.1.1.5.1.6 (defined in CISCO-CATOS-ACL-QOS-MIB)
This object specifies the min WRED threshold parameter of a threshold number for the specific port type when WRED drop algorithm is used. WRED (Weighted Random Early Detect) is a mechanism which drops packets fairly during congestion so that adaptive applications can react to congestion. This object specifies a percentage of the buffer size. This object is instantiated only if the value of caqQueueThreshDropAlgorithm is wred(2). - Cisco Class Based Qos RED Configuration Minimum Threshold
- cbQosREDCfgMinThreshold 1.3.6.1.4.1.9.9.166.1.11.1.1.2 (defined in CISCO-CLASS-BASED-QOS-MIB)
Minimum threshold in number of packets. When the average queue length reaches this number, WRED begins to drop packets with the specified IP precedence. This is deprecated by cbQosREDClassCfgMinThreshold. - Cisco Class Based Qos RED Class Configuration Minimum Threshold Time
- cbQosREDClassCfgMinThresholdTime 1.3.6.1.4.1.9.9.166.1.11.1.1.8 (defined in CISCO-CLASS-BASED-QOS-MIB)
The minimum WRED threshold value specified in milli-seconds. The milli-second value is internally converted to bytes by using the bandwidth that is available for the class. - Cisco Weighted Random Early Detection/Drop Config Red Minimum Threshold
- cewredConfigRedMinThreshold 1.3.6.1.4.1.9.9.222.1.3.2.1.4 (defined in CISCO-ENHANCED-WRED-MIB)
The average queue depth at which WRED begins to drop packets. Below this value no packets will be dropped. - Juniper Js Policy Per Minimum Kbytes Threshold
- jnxJsPolicyPerMinKbytesThreshold 1.3.6.1.4.1.2636.3.39.1.4.1.1.2.1.10 (defined in JUNIPER-JS-POLICY-MIB)
The attribute indicates the threshold value of kbyte per min. - agent Cos Queue Mgmt Wred Minimum Threshold
- agentCosQueueMgmtWredMinThreshold 1.3.6.1.4.1.4526.10.3.3.2.5.1.3 (defined in NETGEAR-QOS-COS-MIB)
Weighted RED minimum queue threshold, below which no packets are dropped for the current drop precedence level. The value specifies the threshold based on a fraction of the overall device queue size in terms of sixteenths (0/16, 1/16, 2/16 , 16/16). Since device implementations vary, the actual value deployed may be rounded up or down accordingly. The default value is calculated from the agentCosQueueIndex and agentCosQueueDropPrecIndex as shown in the following table (values listed for drop precedence levels 1, 2, and 3, respectively): Queue Index 0: 8, 6, 4 Queue Index 1: 9, 7, 5 Queue Index 2: 10, 8, 6 Queue Index 3: 11, 9, 7 Queue Index 4: 12, 10, 8 Queue Index 5: 13, 11, 9 Queue Index 6: 14, 12, 10 Queue Index 7: 15, 13, 11 This object is only used when agentCosQueueMgmtType is set to wred(2). Any value set for this object must be equal to or less than the value of agentCosQueueMgmtWredMaxThreshold. - Cisco Switch QOS If Dropped Config Minimum Wred Threshold
- csqIfDropConfigMinWredThreshold 1.3.6.1.4.1.9.9.580.1.4.4.1.6 (defined in CISCO-SWITCH-QOS-MIB)
This object specifies the min WRED threshold parameter of a threshold number for the specific interface when WRED drop algorithm is used. WRED (Weighted Random Early Detect) is a mechanism which drops packets fairly during congestion so that adaptive applications can react to congestion. This object specifies a percentage of the buffer size. This object is configurable only if 'wred' bit in the value of qosIfCapabilities object for the same ifIndex and traffic direction is set. If value of csqIfDropConfigAlgorithm is not 'wred', this object value has no effect. - Alcatel QoS Action Wred Minimum Threshold
- alaQoSActionWredMinimumThreshold 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.7 (defined in ALCATEL-IND1-QOS-MIB)
Bandwidth at which WRED should start to discard traffic. - Alcatel QoS Applied Action Wred Minimum Threshold
- alaQoSAppliedActionWredMinimumThreshold 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.7 (defined in ALCATEL-IND1-QOS-MIB)
Bandwidth at which WRED should start to discard traffic.
