The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for module operation
- ncdchass Module Operation Status
- ncdchassModuleOperStatus 1.3.6.1.4.1.43.20.1.2.2.1.9 (defined in NCDCHASS-MIB)
Provides operational status of the module. The following are possible definitions of the values. The exact definition of the values is implementation specific. A value of other(1) implies some undetermined state, possibly as a result of setting ncdchassModuleAdminStatus to a value of disable(3). A value of invalid(2) could have the possible meaning that the module exists but the ncdchasssis manager has no direct control over the module. A value of testing(3) may be a diagnostic state. A value of operational(4) implies that the entity is running with no errors or warnings. State resetInProgress(5) implies equivalent of setting ncdchassModuleAdminStatus to reset(4). The states of warning(6), nonFatalError(7), fatalError(8) reflect conditions detected during operation. The entity may or may not be still functional. For example if a modules value of ncdchassModuleAdminStatus is disable(3) and is set to enable(2) then ncdchassModuleOperStatus may enter a state of testing(3) then change to a value of operational(4). - Chassis Module Operation Status
- chasModuleOperStatus 1.3.6.1.4.1.800.2.1.2.1.1.14 (defined in CHASSIS-MIB)
Provides operational state of the given module. The exact definition of the values is implementation specific. A value of unknown(1) implies some undetermined state, possibly as a result of a module failing the low-level selftest. A value of invalid(2) may mean that the module exists but the chassis manager has no direct control over it. A value of operational(3) implies that the entity is running with no errors or warnings. A value of disabled(4) reflects the response to the chasModuleAdminStatus of disable(4). A value of resetInProgress(5) also reflects the equivalent AdminStatus reset(5). Note that the states warning(8), nonFatalError(9), and fatalError(10) reflect conditions detected during operation. The module may or may not be fuctional at this point. For example a module's value of AdminStatus is disable(4), the OperStatus will reflect that. The AdminStatus is set to enable(3), the OperStatus might then change to testing(7) then change to operational(3). - cmm Module Operation Status
- cmmModuleOperStatus 1.3.6.1.4.1.52.4.1.1.18.1.2.1.11 (defined in ct-cmmphys-mib)
The value of this object is the operational status of the CMM module. initializing(1) -- the module is booting up or in the process of a software upgrade active(2) -- all modems that belong to this module are available for accepting calls leaving-service(3) -- all modems that belong to this module are functional but are no longer available for accepting calls (Existing calls are allowed to terminate normally.) out-of-service(4) -- none of the modems that belong to this module are available for accepting calls nor do they have any existing calls faulty(5) -- the module has been removed from service by an NMS and is considered to be unusable impaired(6) -- the module is otherwise active but one or more modems are in the out-of-service, initializing, testing, or faulty states - Cisco Entity Field Replaceable Unit Control Module Operation Status
- cefcModuleOperStatus 1.3.6.1.4.1.9.9.117.1.2.1.1.2 (defined in CISCO-ENTITY-FRU-CONTROL-MIB)
This object shows the module's operational state. - Cisco Fibre Element If Module Bandwidth Fairness Operation
- fcIfModuleBandwidthFairnessOper 1.3.6.1.4.1.9.9.289.1.1.15.1.3 (defined in CISCO-FC-FE-MIB)
The operational status of bandwidth fairness on the module. enabled(1) - Bandwidth fairness is enabled on the module disabled(2) - Bandwidth fairness is disabled on the module
