The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for operation link
- ima Port Ima Operation Link Delay
- imaPortImaOperLinkDelay 1.3.6.1.4.1.43.1.12.3.1.1.19.2.1.1.9 (defined in 3comab9300)
This object indicates the IMA Port Operational Link Delay of the port. - ima Card Group Operation Link Delay Max
- imaCardGroupOperLinkDelayMax 1.3.6.1.4.1.43.1.12.3.1.1.19.3.1.1.11 (defined in 3comab9300)
This object is the operational maximum link differential delay in msec. - x25 Operation Data Link Id
- x25OperDataLinkId 1.3.6.1.2.1.10.5.2.1.24 (defined in rfc1382)
This identifies the instance of the index object in the first table of the most device specific MIB for the interface used by this PLE. - sna Node Link Operation Entry
- snaNodeLinkOperEntry 1.3.6.1.2.1.34.1.1.8.1 (defined in rfc1666)
Entry contains all current parameters for one Node link. The objects in the entry have read-only access. - sna Node Link Operation Max Piu
- snaNodeLinkOperMaxPiu 1.3.6.1.2.1.34.1.1.8.1.2 (defined in rfc1666)
Maximum number of octets that can be exchanged by this Node in one Path Information Unit (PIU). - sdlc Link Stations Operation MODULO
- sdlcLSOperMODULO 1.3.6.1.2.1.41.1.2.2.1.8 (defined in rfc1747)
This object reflects the current modulus for an SDLC link station. This modulus determines the size of rotating acknowledgement window used by the SDLC link station pair. - sdlc Link Stations Operation RNRLIMIT
- sdlcLSOperRNRLIMIT 1.3.6.1.2.1.41.1.2.2.1.12 (defined in rfc1747)
This object reflects the current length of time (in 1/100ths of a second) that an SDLC link station will allow its adjacent link station to remain in a busy (RNR) state before declaring it inoperative. The object descriptor contains the name of an NCP configuration parameter, RNRLIMIT. Please note that the value of this object represents 1/100ths of a second while the NCP RNRLIMIT is represented in minutes. A value of sdlcLSOperRNRLIMIT == 0 means there is no limit. - sdlc Link Stations Operation DATMODE
- sdlcLSOperDATMODE 1.3.6.1.2.1.41.1.2.2.1.13 (defined in rfc1747)
This object reflects whether the current communications mode with the adjacent link station is two-way-alternate (half) or two-way-simultaneous (full). - sdlc Link Stations Operation Last Fail FRMR Info
- sdlcLSOperLastFailFRMRInfo 1.3.6.1.2.1.41.1.2.2.1.19 (defined in rfc1747)
This object reflects the information field of the FRMR frame if the last failure for this SDLC link station was as a result of an invalid frame. Otherwise, this field has no meaning. - sdlc Core Link Stations Operation Group
- sdlcCoreLSOperGroup 1.3.6.1.2.1.41.1.4.2.1.5 (defined in rfc1747)
The sdlcCorePortOperGroup defines objects which are common to the PortOper group of all compliant link stations. - Network Appn Forward Link Station Operation Status
- nwAppnFwdLsOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.3 (defined in ctron-appn-mib)
Specifies the current operating status of the link for which this entry exists. - port Voice Operation Link Down Busy
- portVoiceOperLinkDownBusy 1.3.6.1.4.1.173.7.3.8.2.1.14 (defined in netlink-specific-mib)
This flag enables or disables automatic busy-out of channels when the link is down. When enabled, the system will automatically busy-out channels when the composite link is down. When disabled, channels remain on-hook when the link is down. If your application is connected to a PBX that can route calls to another alternate source based on an all busy condition, enable this so the PBX will recognize this condition and reroute the calls while the composite link is down. - Enterasys If Operation State Link Change
- etsysIfOperStateLinkChange 1.3.6.1.4.1.5624.1.2.57.1.1.1 (defined in enterasys-if-mib-ext-mib)
This object controls the system wide ability to manipulate the physical link state of an interface when the interface's ifOperStatus transitions into or out of the down(2) state. A value of enabled(1) will cause an interface to drop physical link when its ifOperStatus transitions to down(2). If the interface would transition out of the down(2) state, assuming it did have link, then physical link will be restored to the interface. A value of disabled(2) will cause an interface to not alter its physical link regardless of the value of ifOperStatus. This object only affects those interfaces which have a concept of physical link. - Enterasys If Mib Ext Operation Link Group
- etsysIfMibExtOperLinkGroup 1.3.6.1.4.1.5624.1.2.57.2.1.1 (defined in enterasys-if-mib-ext-mib)
The group that controls physical link manipulation as a result of ifOperStatus changes. - Enterasys Link Flap Interface Operation Status
- etsysLinkFlapIntfOperStatus 1.3.6.1.4.1.5624.1.2.52.1.2.1.1.3 (defined in enterasys-link-flap-mib.)
The current status of the interface with respect to Link Flap detection. A read of operational(1) indicates that the Link Flap feature has not taken any action to operationally limit this interface. A read of disabled(2) indicates that the Link Flap feature has taken action to operationally disable this interface due to excessive link state transitions. Setting this object to operational(1) when it is disabled(2) will cause Link Flap to release its control which is keeping this interface operationally disabled. Any other write of this object will have no effect. Maintaining the value of this object across agent reboots is NOT RECOMMENDED. - appn Link Station Operation State
- appnLsOperState 1.3.6.1.2.1.34.4.1.1.5.1.1.3 (defined in APPN-MIB)
State of this link station. The comments map these more granular states to the 'traditional' four states for SNA resources. Values (2) through (5) represent the normal progression of states when a link station is being activated. Value (6) represents some other state of a link station in the process of being activated. Values (8) through (10) represent different ways a link station can be deactivated. Value (11) represents some other state of a link station in the process of being deactivated. - cisco Data Link Switching T Connection Operation Entry Time
- ciscoDlswTConnOperEntryTime 1.3.6.1.4.1.9.10.9.1.2.3.1.4 (defined in CISCO-DLSW-MIB)
The value of ciscoDlswUpTime when this transport connection conceptual row was created. - cisco Data Link Switching T Connection Operation State
- ciscoDlswTConnOperState 1.3.6.1.4.1.9.10.9.1.2.3.1.6 (defined in CISCO-DLSW-MIB)
The state of this transport connection. The transport connection enters `connecting' state when DLSw makes a connection request to the transport layer. Once initial Capabilities Exchange is sent, the transport connection enters enters `initCapExchange' state. When partner capabilities have been determined and the transport connection is ready for sending CanUReach (CUR) messages, it moves to the `connected' state. When DLSw is in the process of bringing down the connection, it is in the `disconnecting' state. When the transport layer indicates one of its connections is disconnected, the transport connection moves to the `disconnected' state. Whereas all of the values will be returned in response to a management protocol retrieval operation, only two values may be specified in a management protocol set operation: `quiescing' and `disconnecting'. Changing the value to `quiescing' prevents new circuits from being established, and will cause a transport disconnect when the last circuit on the connection goes away. Changing the value to `disconnecting' will force off all circuits immediately and bring the connection to `disconnected' state. - cisco Data Link Switching T Connection Operation Partner NB Excl
- ciscoDlswTConnOperPartnerNBExcl 1.3.6.1.4.1.9.10.9.1.2.3.1.14 (defined in CISCO-DLSW-MIB)
The value of true signifies that the NetBIOS names received from this partner in the NetBIOS name list in its capabilities exchange message are the only NetBIOS names reachable by that partner. `False' indicates that other NetBIOS names may be reachable. `False' should be returned before a Capabilities Exchange message is received, if one is never received, or if one is received without a NB Name Exclusivity CV. If an implementation chooses to keep ciscoDlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged. - cisco Data Link Switching T Connection Operation In Data Octets
- ciscoDlswTConnOperInDataOctets 1.3.6.1.4.1.9.10.9.1.2.3.1.23 (defined in CISCO-DLSW-MIB)
The number octets in Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this transport connection. Each message is counted starting with the first octet following the SSP message header. - cisco Data Link Switching T Connection Operation Control Unit Rex Rcvds
- ciscoDlswTConnOperCURexRcvds 1.3.6.1.4.1.9.10.9.1.2.3.1.29 (defined in CISCO-DLSW-MIB)
The number of CanUReach_ex messages received on this transport connection. - cisco Data Link Switching T Connection Operation N Rex Sents
- ciscoDlswTConnOperNRexSents 1.3.6.1.4.1.9.10.9.1.2.3.1.34 (defined in CISCO-DLSW-MIB)
The number of NETBIOS_NR_ex messages sent on this transport connection. - cisco Data Link Switching Circuit FC Reset Operation Rcvds
- ciscoDlswCircuitFCResetOpRcvds 1.3.6.1.4.1.9.10.9.1.5.2.1.28 (defined in CISCO-DLSW-MIB)
The number of Reset Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero should be returned if this circuit is not running the DLSw pacing protocol. - Cisco DSPU Pu Operation Link Retry Count
- dspuPuOperLinkRetryCount 1.3.6.1.4.1.9.9.24.1.4.2.1.11 (defined in CISCO-DSPU-MIB)
Number of times that the DSPU node will attempt to activate the link between the dspuNode and the remote PU. - Cisco DSPU Pu Operation Link Retry Timeout
- dspuPuOperLinkRetryTimeout 1.3.6.1.4.1.9.9.24.1.4.2.1.12 (defined in CISCO-DSPU-MIB)
Value (in seconds) for the delay between link activation attempts between the dspuNode and the remote PU. - Cisco FCIP Management Fcip Link Ext Write Acc Operation
- cfmFcipLinkExtWriteAccOper 1.3.6.1.4.1.9.9.329.1.1.2.1.18 (defined in CISCO-FCIP-MGMT-EXT-MIB)
When Write Acceleration is operationally off for the FCIP link, the value of this object will be set to 'false'. When Write Acceleration is operationally on for the FCIP link, the value of this object will be set to 'true'. - Cisco FCIP Management Fcip Link Ext Tape Acc Operation
- cfmFcipLinkExtTapeAccOper 1.3.6.1.4.1.9.9.329.1.1.2.1.19 (defined in CISCO-FCIP-MGMT-EXT-MIB)
When Tape Acceleration is operationally off for the FCIP link, the value of this object will be set to 'false'. When Tape Acceleration is operationally on for the FCIP link, the value of this object will be set to 'true'.
