The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for operation mode
- GroupWise ADA Operation Mode
- adaOperationMode 1.3.6.1.4.1.23.2.39.1.1.1.3 (defined in GWADA-MIB)
The Operation Mode of this Administration Agent: Normal, Domain, or Post Office - tsm Operation Port Adapt Switch Mode
- tsmOperPortAdaptSwMode 1.3.6.1.4.1.800.2.19.1.2.1.1.11 (defined in TSMEXT-MIB)
The operational adaptive switch mode of the port. 1 = cutThrough. A scheme that allows frame transmission to begin at the output port prior to end-of-frame reception at the input port. 2 = storeAndForward. The entire packet is received and stored before switching begins. 3 = notAdaptive. The port is not running in adaptive mode. - tsm Operation Switch Mode Table
- tsmOperSwModeTable 1.3.6.1.4.1.800.2.19.1.2.2 (defined in TSMEXT-MIB)
TSM Switch Mode Operational Table. - tsm Operation Switch Mode high Error Threshold
- tsmOperSwModeHiErrThresh 1.3.6.1.4.1.800.2.19.1.2.2.1.2 (defined in TSMEXT-MIB)
The operational high error threshold for all ports associated with the TSM which are configured to run in adaptive mode. If the percentage of errors in a sampling period meets or exceeds this value, the port's switching mode will change from cut-through to store-and-forward mode. - tsm Operation Switch Mode Trend Threshold
- tsmOperSwModeTrendThresh 1.3.6.1.4.1.800.2.19.1.2.2.1.4 (defined in TSMEXT-MIB)
The operational error rate trend threshold in percent for all ports associated with the TSM which are configured to run in adaptive mode. When the percentage of errors is between the high and low error thresholds AND the port is currently running in cut-through mode, the error rate trend which is the difference in errors between two sampling periods is compared to the error rate trend threshold. If the error rate trend is greater than this value, the port's switching mode will change from cut-through mode to store-and-forward. - dot3 Pause Operation Mode
- dot3PauseOperMode 1.3.6.1.2.1.10.7.10.1.2 (defined in EtherLike-MIB)
in use on this interface, as determined by either (1) the result of the auto-negotiation function or (2) if auto-negotiation is not enabled or is not implemented for the active MAU attached to this interface, by the value of dot3PauseAdminMode. Interfaces operating at 100 Mb/s or less will never return 'enabledXmit(2)' or 'enabledRcv(3)'. Interfaces operating in half-duplex mode will always return 'disabled(1)'. Interfaces on which auto-negotiation is enabled but not yet completed should return the value 'disabled(1)'. - x25 Operation Interface Mode
- x25OperInterfaceMode 1.3.6.1.2.1.10.5.2.1.2 (defined in rfc1382)
Identifies DCE/DTE mode in which the interface operates. A value of dxe indicates the role will be determined by XID negotiation at the Link Layer and that negotiation has not yet taken place. - ap WSL Support Operation Mode
- apWSLSupportOperationMode 1.3.6.1.4.1.52.4.13.22.7 (defined in ctron-ap3000-mib)
This attribute indicates that the WSL Operation Mode in 0: AP in standalone mode, or 1: AP in ETS WSL managed mode (associated mode). - port Bsci Operation Data Mode
- portBsciOperDataMode 1.3.6.1.4.1.173.7.3.4.2.1.27 (defined in netlink-specific-mib)
Sets the parity parameter. - l S Sdlc Operation L2 Dat Mode
- lSSdlcOperL2DatMode 1.3.6.1.4.1.173.7.3.5.4.1.8 (defined in netlink-specific-mib)
This object determines whether transmission can be in one (alternate) or two (simultaneous) directions at the same time. - Enterasys Vrrp Ext Operation Accept Mode
- etsysVrrpExtOperAcceptMode 1.3.6.1.4.1.5624.1.2.64.1.1.1.3 (defined in enterasys-vrrp-extensions-mib)
Controls whether a virtual router in Master state will accept packets addressed to the address owner's address as its own if it is not the address owner. Default is False. - Enterasys Vrrp Ext Operation Preempt Mode Delay
- etsysVrrpExtOperPreemptModeDelay 1.3.6.1.4.1.5624.1.2.64.1.1.1.4 (defined in enterasys-vrrp-extensions-mib)
The time interval, in seconds, before the backup router will become master if vrrpOperPreemptMode is set to true. - Cisco Catalyst 6000 Crossbar Bus Only Mode Operation
- cc6kxbarBusOnlyModeOper 1.3.6.1.4.1.9.9.217.1.1.9 (defined in CISCO-CAT6K-CROSSBAR-MIB.)
Indicates if the bus mode is operationally enabled on the device or not. 'true' - Modules are allowed to run in 'busmode'. 'false' - None of the modules are allowed to run in 'busmode' i.e., All the non-fabric capable modules will be powered off. Absence of fabric module results in all the fabric capable modules being powered off. - Cisco Catalyst 6000 Crossbar Bus Only Mode Operation Group
- cc6kxbarBusOnlyModeOperGroup 1.3.6.1.4.1.9.9.217.3.2.22 (defined in CISCO-CAT6K-CROSSBAR-MIB.)
A collection of objects providing the operational bus mode. - cisco Data Link Switching T Connection Operation Flow Сontrol Mode
- ciscoDlswTConnOperFlowCntlMode 1.3.6.1.4.1.9.10.9.1.2.3.1.8 (defined in CISCO-DLSW-MIB)
The flow control mechanism in use on this transport connection. This value is undetermined (1) before the mode of flow control can be established on a new transport connection (i.e., after CapEx is sent but before Capex or other SSP control messages have been received). Pacing (2) indicates that the standard RFC 1795 pacing mechanism is in use. Other (3) may be either the RFC 1434+ xBusy mechanism operating to a back-level DLSw, or a vendor-specific flow control method. Whether it is xBusy or not can be inferred from ciscoDlswTConnOperPartnerVersion. - Cisco Dot11 Csc Operation Mode
- cDot11CscOperMode 1.3.6.1.4.1.9.10.109.1.1.5 (defined in CISCO-DOT11-CONTEXT-SERVICES-CLIENT-MIB)
The current mode of operation of this 802.11 station. The semantics for this object are as follows. infrastructure - An 802.11 station operates in the 'infrastructure' mode if it discovers a WDS entity through advertisement messages and registers with it. distributed - If the 802.11 station couldn't discover a WDS entity or has lost contact with the its parent WDS entity, then the station operates in the 'distributed' mode. However, the station listens for the advertisement messages from the WDS entity in the background to get back to the 'infrastructure' mode. - Cisco Dot11 Context Services Manager Clnt Operation Mode
- cDot11CsMgrClntOperMode 1.3.6.1.4.1.9.9.3228.1.1.1.1.6 (defined in CISCO-DOT11-CONTEXT-SERVICES-MANAGER-MIB)
The current mode of operation of the 802.11 station. The semantics for this object are as follows. infrastructure - An 802.11 station operates in the 'infrastructure' mode if it discovers a WDS entity through advertisement messages and registers with it. distributed - If the 802.11 station couldn't discover a WDS entity or has lost contact with the its parent WDS entity, then the station operates in the 'distributed' mode. However, the station listens for the advertisement messages from the WDS entity in the background to get back to the 'infrastructure' mode. - Cisco CISCO DOT11 CONTEXT SERVICES Node Operation Mode
- cDot11csNodeOperationMode 1.3.6.1.4.1.9.10.110.1.1.14 (defined in CISCO-DOT11-CONTEXT-SERVICES-MIB)
This object indicates the mode which this infrastructure node is currently operating in. The semantics are described as follows. adminStandAlone - An infrastructure node in this mode has been configured to be the highest level node in the wireless services hierarchy and acts as both the Infrastructure and Mobile Node Authenticator. For an infrastructure node for which cDot11csServiceType is configured as 'rootWns', the mode of operation is always 'adminStandAlone' as it is the highest level node in the wireless services hierarchy. An infrastructure node whose cDot11csServiceType is 'wds' can be in 'adminStandAlone' mode if there is no node offering Wireless Network Services and is the root node in the wireless services hierarchy. An infrastructure node for which the value of cDot11csServiceType is 'wns' can't be in 'adminStandAlone' mode since it always has another infrastructure node as its parent for which the value of cDot11csServiceType is 'rootWns' and won't be the root node in the wireless services hierarchy. infrastructure - An infrastructure node in this mode has been configured with an external IN Authenticator. The external IN Authenticator in this case is the infrastructure node whose value of cDot11csServiceType is 'rootWns'. The immediate parent of this infrastructure node is given by the object cDot11csParentNodeAddress. fallbackStandAlone - This infrastructure node has been configured to function in the 'infrastructure' mode but the node has dropped back to 'fallbackStandAlone' mode due to loss of communication with its parent node. From an operational point of view, 'fallbackStandAlone' mode is same as 'adminStandAlone' mode. However, in the 'fallbackStandAlone' mode, an infrastructure node continuously attempts to get back to the 'infrastructure' mode. - Cisco DOT11 High-Throughput Physical Operation Mode Frequency
- cD11HtPhyOperModeFrequency 1.3.6.1.4.1.9.9.607.1.1.2.1.2 (defined in CISCO-DOT11-HT-PHY-MIB)
This object represents the channel characteristics of the PHY. The semantics are as follows. legacyMode - The radio channel characteristics are the same as that of 802.11a/802.11g radios. htMode - The radio operates in either 40MHz bandwidth with one to four spatial streams. dupLegacyMode - The radio operates in a 40MHz channel composed of 2 adjacent 20MHz channels. The packets sent are in the legacy 802.11a format in each of the 20MHz channels. fortyMHzUpperMode - The radio tranmits a legacy or HT packet in the upper 20MHz channel of a 40MHz channel. fortyMHzLowerMode - The radio transmits a legacy or HT packet in the lower 20MHz channel of a 40MHz channel. - Cisco Entity Field Replaceable Unit Control Power Redundancy Operation Mode
- cefcPowerRedundancyOperMode 1.3.6.1.4.1.9.9.117.1.1.1.1.5 (defined in CISCO-ENTITY-FRU-CONTROL-MIB)
The power supply redundancy operational mode. - Cisco Entity Field Replaceable Unit Control PS Output Mode In Operation
- cefcPSOutputModeInOperation 1.3.6.1.4.1.9.9.117.1.6.2.1.3 (defined in CISCO-ENTITY-FRU-CONTROL-MIB)
A value of 'true' indicates that this mode is the operational mode of the power supply output capacity. A value of 'false' indicates that this mode is not the operational mode of the power supply output capacity. For a given power supply's entPhysicalIndex, at most one instance of this object can have the value of true(1). - Cisco Entity Field Replaceable Unit Control MIB Power Operation Mode Group
- cefcMIBPowerOperModeGroup 1.3.6.1.4.1.9.9.117.3.2.12 (defined in CISCO-ENTITY-FRU-CONTROL-MIB)
The collection of objects which are used to monitor the device's power supply operational redundancy mode. - Cisco Ethernet-like Dot3 Pause Ext Operation Mode
- ceeDot3PauseExtOperMode 1.3.6.1.4.1.9.9.645.1.1.1.1.2 (defined in CISCO-ETHERLIKE-EXT-MIB)
Provides additional information about the flow control operational status on this interface. txDisagree(0) - the transmit pause function on this interface is disabled due to disagreement from the far end on negotiation. rxDisagree(1) - the receive pause function on this interface is disabled due to disagreement from the far end on negotiation. txDesired(2) - the transmit pause function on this interface is desired. rxDesired(3) - the receive pause function on this interface is desired. - Cisco Fibre Element If Operation Mode
- fcIfOperMode 1.3.6.1.4.1.9.9.289.1.1.2.1.3 (defined in CISCO-FC-FE-MIB)
The current operating mode of the port. This object will also be an additional varbind sent in the linkUp notification ( defined in IF-MIB ) in addition to the varbinds defined for this notification. - Cisco Fibre Element If Operation Trunk Mode
- fcIfOperTrunkMode 1.3.6.1.4.1.9.9.289.1.1.2.1.10 (defined in CISCO-FC-FE-MIB)
The current trunking mode of the port. - Cisco Fibre Channel Multicast Multicast Root Operation Mode
- cfmMulticastRootOperMode 1.3.6.1.4.1.9.9.435.1.1.1.1.2 (defined in CISCO-FC-MULTICAST-MIB)
The operational multicast root mode on this VSAN. - Cisco GPRS Access Point Operation Mode
- cgprsAccPtOperationMode 1.3.6.1.4.1.9.9.183.1.1.3.1.12 (defined in CISCO-GPRS-ACC-PT-MIB)
This object denotes the operation mode of this APN. Each mode has different PDP or Bearer context activation and deactivation behavior and is given as below: inService - normal operational mode in which all functions are allowed. cgprsAccPtInServiceNotif notification will be sent to indicate the state change. maintenance - No new PDPs or Bearers can be activated in this state. cgprsAccPtMaintenanceNotif notification will be sent to indicate the state change. - cisco Bidirectional Forwarding Detection Session Operation Mode
- ciscoBfdSessOperMode 1.3.6.1.4.1.9.10.137.1.2.1.9 (defined in CISCO-IETF-BFD-MIB)
This object specifies current operating mode that BFD session is operating in. - vrrp Operation Preempt Mode
- vrrpOperPreemptMode 1.3.6.1.2.1.68.1.3.1.12 (defined in ibm-vrrp)
Controls whether a higher priority virtual router will preempt a lower priority master. - tagged Mode Operation Status
- taggedModeOperStatus 1.3.6.1.4.1.3646.1300.2.1.11.1.19 (defined in ASKEY-SYSTEM-MIB)
Card operational tagged mode. This entry indicates tagged mode running on the specific card. All ports of the tagged type card will drop packets that don't have tagged header. And all ports of untagged type card will drop packets that have tagged header. Do nothing for 'noAction' case. - Switch L3 Vrrp Operation Preempt Mode
- swL3VrrpOperPreemptMode 1.3.6.1.4.1.171.11.70.5.3.14.1.1.13 (defined in DES3528-SWL3MGMT-MIB)
Controls whether a higher priority virtual router will preempt a lower priority master. - Switch L3 Vrrp Operation Preempt Mode
- swL3VrrpOperPreemptMode 1.3.6.1.4.1.171.11.70.5.3.14.1.1.13 (defined in DES3552-SWL3MGMT-MIB)
Controls whether a higher priority virtual router will preempt a lower priority master. - Switch L3 Vrrp Operation Preempt Mode
- swL3VrrpOperPreemptMode 1.3.6.1.4.1.171.11.70.5.3.14.1.1.13 (defined in DES3612-SWL3MGMT-MIB)
Controls whether a higher priority virtual router will preempt a lower priority master. - Switch L3 Vrrp Operation Preempt Mode
- swL3VrrpOperPreemptMode 1.3.6.1.4.1.171.11.70.5.3.14.1.1.13 (defined in DES3627-SWL3MGMT-MIB)
Controls whether a higher priority virtual router will preempt a lower priority master. - Switch L3 Vrrp Operation Preempt Mode
- swL3VrrpOperPreemptMode 1.3.6.1.4.1.171.11.70.5.3.14.1.1.13 (defined in DES3650-SWL3MGMT-MIB)
Controls whether a higher priority virtual router will preempt a lower priority master.
