The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for operation virtual
- atmx Ces Virtual Channel Connection Operation Status
- atmxCesVccOperStatus 1.3.6.1.4.1.800.2.4.10.1.2.1.1.9 (defined in XYLAN-ATM-CE-MIB)
The current operational state of this virtual circuit. - atmx Virtual Channel Connection Operation Status
- atmxVccOperStatus 1.3.6.1.4.1.800.2.4.5.1.1.8 (defined in XYLAN-ATM-MIB)
The actual operational status of the VCC A value of end2endUp(2) or end2endDown(3) would be used if end-to-end status is known. If only local status information is available, a value of localUpEnd2endUnknown(4) or localDown(5) would be used. - Xylan ATM Traffic Shaper Member Virtual Path Identifier Operation
- xylnatmTrafficShaperMemVpiOper 1.3.6.1.4.1.800.2.9.1.19.1.1.6 (defined in XYLAN-CSM-MIB)
This object is used to register or de-register a VPI/VCI to or out of a traffic shaper. none(1) when VPI/VCI is not registered/ de-register to/from the shaper. No operation. add(2) registers the VPI/VCI to the shaper. Its outgoing cell stream is shaped based on the characteristics of the shaper. rem(3) de-registers the VPI/VCI out of the shaper. When a VPI/VCI is not register to one of the seven shapers (1..7), its outgoing traffic is logically routed to the default shaper (shaper 8) and shaped based on traffic characteristics of shaper 8. - Xylan ATM Soft P Virtual Channel Connection Operation Status
- xylnatmSoftPVccOperStatus 1.3.6.1.4.1.800.2.9.2.1.5.1.12 (defined in XYLAN-SOFT-PVC-MIB)
Describes the status of the Soft PVCC. When the row is not 'active', the value of this object is 'other'. - Cabletron DLSw Operation Virtual Ring Number
- ctdlswOperVirtualRingNumber 1.3.6.1.4.1.52.4.1.2.8.1.1.5 (defined in ctron-dlsw-mib)
Specifies the operational ring/segment number that uniquely identifies the virtual segment to which this DLSw is connected. This object may only be modified when ctdlswOperStatus is disabled. - bridge Operation Virtual LANID
- bridgeOperVirtualLANID 1.3.6.1.4.1.173.7.9.2 (defined in netlink-specific-mib)
LAN id inserted into token ring RIF field representing internal virtual ring, for LLC2 or bridged traffic - Enterasys Load Sharing Network Address Translation Virtual Server Operation Status
- etsysLsnatVserverOperStatus 1.3.6.1.4.1.5624.1.2.74.2.4.1.12 (defined in enterasys-lsnat-mib)
This object contains the operational state of this Virtual server. The state of this Virtual server will be deemed 'up' when the row is 'active', the etsysLsnatVserverAdminStatus is 'enabled', a Server farm has been assigned with the etsysLsnatVserverServerfarmName leaf and that etsysLsnatServerfarmEntry has a state (etsysLsnatServerfarmOperStatus) of 'up' and the VRRP defined by etsysLsnatVserverVrrpInterface and etsysLsnatVserverVrrpVrid is returning a state of 'master'. - `up', indicates the Virtual server is operationally ready. - `down', indicates the Virtual server is operationally unavailable. - Enterasys Ospf Ext Virtual If Operation Status
- etsysOspfExtVirtIfOperStatus 1.3.6.1.4.1.5624.1.2.65.1.2.3.1.2 (defined in enterasys-ospf-ext-mib)
The current operational state of OSPF on this virtual interface. - Cisco ATM Forum Virtual Channel Connection Operation Status
- atmfVccOperStatus 1.3.6.1.4.1.353.2.5.1.1.4 (defined in ATM-FORUM-MIB)
The present actual operational status of the VCC. A value of end2endUp(2) or end2endUp(3) is used if the end to end status is known. If only local status is known a value of localUpEnd2endUnknown(4) or localDown(5) is used. - Cisco Ethernet Virtual Connection Evc Operation Status
- cevcEvcOperStatus 1.3.6.1.4.1.9.9.613.1.3.2.1.1 (defined in CISCO-EVC-MIB)
This object specifies the operational status of the EVC: 'unknown' Not enough information available regarding the EVC to determine the operational status at this time or EVC operational status is undefined. 'active' Fully operational between the UNIs in the EVC. 'partiallyActive' Capable of transferring traffic among some but not all of the UNIs in the EVC. This operational status is applicable only for Multipoint-to-Multipoint EVCs. 'inactive' Not capable of transferring traffic among any of the UNIs in the EVC. This value is derived from data gathered by underlying OAM protocol. - Cisco Ethernet Virtual Connection Evc Uni Operation Status
- cevcEvcUniOperStatus 1.3.6.1.4.1.9.9.613.1.3.3.1.3 (defined in CISCO-EVC-MIB)
This object indicates the operational status derived from data gathered by the OAM protocol for an UNI. 'unknown' Status is not known; possible reason could be caused by the OAM protocol has not provided information regarding the UNI. 'notReachable' UNI is not reachable; possible reason could be caused by the OAM protocol messages having not been received for an excessive length of time. 'up' UNI is active, up, and able to pass traffic. 'down' UNI is down and not passing traffic. 'adminDown' UNI has been administratively put in down state. 'localExcessiveError' UNI has experienced excessive number of invalid frames on the local end of the physical link between UNI-C and UNI-N. 'remoteExcessiveError' UNI has experienced excessive number of invalid frames on the remote side of the physical connection between UNI-C and UNI-N. 'localInLoopback' UNI is loopback on the local end of the physical link between UNI-C and UNI-N. 'remoteInLoopback' UNI is looped back on the remote end of the link between UNI-C and UNI-N. 'localOutLoopback' UNI just transitioned out of loopback on the local end of the physcial link between UNI-C and UNI-N. 'remoteOutLoopback' UNI just transitioned out of loopback on the remote end of the physcial link between UNI-C and UNI-N. - Cisco Ethernet Virtual Connection SI Operation Status
- cevcSIOperStatus 1.3.6.1.4.1.9.9.613.1.4.2.1.1 (defined in CISCO-EVC-MIB)
This object indicates the operational status of the Service Instance. 'up' Service instance is fully operational and able to transfer traffic. 'down' Service instance is down and not capable of transferring traffic, and is not administratively configured to be down by management system. 'adminDown' Service instance has been explicitly configured to administratively down by a management system and is not capable of transferring traffic. 'deleted' Service instance has been deleted. 'errorDisabled' Service instance has been shut down due to MAC security violations. 'unknown' Operational status of service instance is unknown or undefined. - vrrp Operation Virtual Mac Address
- vrrpOperVirtualMacAddr 1.3.6.1.2.1.68.1.3.1.2 (defined in ibm-vrrp)
The virtual MAC address of the virtual router. Although this object can be derived from the 'vrrpOperVrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps. - vrrp Operation Virtual Router Up Time
- vrrpOperVirtualRouterUpTime 1.3.6.1.2.1.68.1.3.1.13 (defined in ibm-vrrp)
This is the value of the `sysUpTime' object when this virtual router (i.e., the `vrrpOperState') transitioned out of `initialized'. - Switch L3 Vrrp Operation Virtual Ip Address
- swL3VrrpOperVirtualIpAddr 1.3.6.1.4.1.171.11.70.5.3.14.1.1.15 (defined in DES3528-SWL3MGMT-MIB)
The assigned IP addresses that a virtual router is responsible for backing up. - Switch L3 Vrrp Operation Virtual Ip Address
- swL3VrrpOperVirtualIpAddr 1.3.6.1.4.1.171.11.70.5.3.14.1.1.15 (defined in DES3552-SWL3MGMT-MIB)
The assigned IP addresses that a virtual router is responsible for backing up. - Switch L3 Vrrp Operation Virtual Ip Address
- swL3VrrpOperVirtualIpAddr 1.3.6.1.4.1.171.11.70.5.3.14.1.1.15 (defined in DES3612-SWL3MGMT-MIB)
The assigned IP addresses that a virtual router is responsible for backing up. - Switch L3 Vrrp Operation Virtual Ip Address
- swL3VrrpOperVirtualIpAddr 1.3.6.1.4.1.171.11.70.5.3.14.1.1.15 (defined in DES3627-SWL3MGMT-MIB)
The assigned IP addresses that a virtual router is responsible for backing up. - Switch L3 Vrrp Operation Virtual Ip Address
- swL3VrrpOperVirtualIpAddr 1.3.6.1.4.1.171.11.70.5.3.14.1.1.15 (defined in DES3650-SWL3MGMT-MIB)
The assigned IP addresses that a virtual router is responsible for backing up.
