The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for peak time
- Cabletron Broadcast Peak Broadcast Rate Time
- ctBroadcastPeakBroadcastRateTime 1.3.6.1.4.1.52.4.1.2.13.1.1.1.5 (defined in ct-broadcast-mib)
The time at which the peak broadcast rate occurred. The value returned will represent system up time at which the peak occurred. - Cabletron FDDI Peak Time
- ctFDDIPeakTime 1.3.6.1.4.1.52.4.1.2.5.2.1.2.1.6 (defined in ctron-fddi-stat-mib)
A time stamp when the peak occured. - peak Switch Load Time
- peakSwitchLoadTime 1.3.6.1.4.1.52.4.1.1.12.2.4 (defined in system-resource-mib)
The time at which the peak switch load occured. The value returned will represent system up time at which the peak occured. - Cisco 2900 Bandwidth Usage Peak Time
- c2900BandwidthUsagePeakTime 1.3.6.1.4.1.9.9.87.1.5.6.1.4 (defined in CISCO-C2900-MIB)
The start time of the measurement interval. - Cisco Cable QOS monitor Cmts Enforce Rule First Peak Time
- ccqmCmtsEnfRuleFirstPeakTime 1.3.6.1.4.1.9.9.341.1.1.1.1.16 (defined in CISCO-CABLE-QOS-MONITOR-MIB)
The user can define two peak times and the remaining hours will be treated as offpeak and the monitoring will happen for these offpeak hours if ccqmCmtsEnfRuleOffPeakDuration and ccqmCmtsEnfRuleOffPeakAvgRate are defined. The first peak parameters are defined using ccqmCmtsEnfRuleFirstPeakTime, ccqmCmtsEnfRuleFirstDuration and ccqmCmtsEnfRuleFirstAvgRate objects while the second peak parameters can be defined using ccqmCmtsEnfRuleSecondPeakTime, ccqmCmtsEnfRuleSecondDuration and ccqmCmtsEnfRuleSecondAvgRate. Each peak time has an associated average rate and a duration for which that average rate holds good. Defining the first peak is mandatory, though defining the second peak and offpeak is not mandatory. Both these peak times should be defined such that they don't overlap and the first peak time has to be an earlier time than the second peak time. User would need to use 24 hour clock for setting this. This object cannot be changed when ccqmCmtsEnfRuleRowStatus is active(1). - Cisco Cable QOS monitor Cmts Enforce Rule Second Peak Time
- ccqmCmtsEnfRuleSecondPeakTime 1.3.6.1.4.1.9.9.341.1.1.1.1.19 (defined in CISCO-CABLE-QOS-MONITOR-MIB)
The user can define two peak times in a day. The second peak is defined using ccqmCmtsEnfRuleSecondPeakTime, ccqmCmtsEnfRuleSecondDuration and ccqmCmtsEnfRuleSecondThreshold objects while the first peak is defined using ccqmCmtsEnfRuleFirstPeakTime, ccqmCmtsEnfRuleFirstDuration and ccqmCmtsEnfRuleFirstDuration. For the remaining hours in the day, the off-peak monitoring would happen if both ccqmCmtsEnfRuleOffPeakDuration and ccqmCmtsEnfRuleOffPeakThreshold are defined. Defining the first peak is mandatory, though defining the second peak and offpeak is not mandatory. Both these peak times should be defined such that they don't overlap and the first peak time has to be an earlier time than the second peak time. ccqmCmtsEnfRuleSecondDuration can be set to 0 to indicate that the second peak monitoring no longer needs to be performed. The first peak has to be defined before defining the second peak time. User would need to use 24 hour clock for setting this. This object cannot be changed when ccqmCmtsEnfRuleRowStatus is active(1). - Cisco Catalyst 6000 Crossbar Statistics Peak Time In Utilization
- cc6kxbarStatisticsPeakTmInUtil 1.3.6.1.4.1.9.9.217.1.3.1.1.9 (defined in CISCO-CAT6K-CROSSBAR-MIB.)
Indicates the time of most recent change in the corresponding instance value of cc6kxbarStatisticsPeakInUtil. - Cisco Catalyst 6000 Crossbar Statistics Peak Time Out Utilization
- cc6kxbarStatisticsPeakTmOutUtil 1.3.6.1.4.1.9.9.217.1.3.1.1.11 (defined in CISCO-CAT6K-CROSSBAR-MIB.)
Indicates the time of most recent change in the corresponding instance value of cc6kxbarStatisticsPeakOutUtil. - Cisco Catalyst 6000 Crossbar Switch Bus Peak Time Utilization
- cc6kxbarSwBusPeakTimeUtil 1.3.6.1.4.1.9.9.217.1.4.6 (defined in CISCO-CAT6K-CROSSBAR-MIB.)
Indicates the time at which the peak percentage value of bandwidth utilization of the switching bus value occurred. - Cisco Enhanced Memory Buffer Peak Time
- cempMemBufferPeakTime 1.3.6.1.4.1.9.9.221.1.1.2.1.18 (defined in CISCO-ENHANCED-MEMPOOL-MIB)
Indicates the time of most recent change in the peak number of buffers (cempMemBufferPeak object) in the pool.
