The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for poll interval
- egp Neighbor Interval Poll
- egpNeighIntervalPoll 1.3.6.1.2.1.8.5.1.13 (defined in rfc1213)
The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904. - ospf If Poll Interval
- ospfIfPollInterval 1.3.6.1.2.1.14.7.1.11 (defined in rfc1253)
The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi- access neighbor. - ospf If Poll Interval
- ospfIfPollInterval 1.3.6.1.2.1.14.7.1.11 (defined in rfc1850)
The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. - Cabletron Front Panel Redundancy Poll Interval
- ctFpRedundPollInterval 1.3.6.1.4.1.52.4.1.5.5.1.2 (defined in ctron-frontpanel-mib)
Get/Set the number of seconds between polls for front panel redundancy. - vlan Sflsp Interfaces Poll Interval
- vlanSflspInterfacesPollInterval 1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.11 (defined in ctron-sfps-sflsp-mib)
The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor. - snmp Poll Interval
- snmpPollInterval 1.3.6.1.4.1.52.4.2.1.1.1.4 (defined in dlm-mib)
The value of the interval (in seconds) on which to poll the destination address with the OIDs defined in the OID table assigned to this poll entry. This interval defines how often an SNMP GET REQUEST PDU will be originated from this host device to the polled address. - port Bsci Admin Poll Interval
- portBsciAdminPollInterval 1.3.6.1.4.1.173.7.3.4.1.1.21 (defined in netlink-specific-mib)
Specifies the time between passes through the polling list. - port Bsci Operation Poll Interval
- portBsciOperPollInterval 1.3.6.1.4.1.173.7.3.4.2.1.21 (defined in netlink-specific-mib)
Specifies the time between passes through the polling list. - Repeater Redundancy Poll Interval
- rptrRedundPollInterval 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.2 (defined in repeater-rev4-mib)
Get/Set the number of seconds between polls for redundancy. - sntp Poll Interval
- sntpPollInterval 1.3.6.1.4.1.52.4.12.30.1.23.1.3 (defined in v2h124-24-mib)
Polling interval. - Enterasys Sntp Client Unicast Poll Interval
- etsysSntpClientUnicastPollInterval 1.3.6.1.4.1.5624.1.2.38.1.2.1 (defined in enterasys-sntp-client-mib)
The number of seconds between successive SNTP request transmissions. This polling interval is used for directed SNTP requests in unicast(1) operational mode. Maintaining the value of this object across agent reboots is REQUIRED. - Enterasys Sntp Client Anycast Poll Interval
- etsysSntpClientAnycastPollInterval 1.3.6.1.4.1.5624.1.2.38.1.5.2 (defined in enterasys-sntp-client-mib)
The number of seconds between SNTP request transmissions. This polling interval is used for directed SNTP requests in anycast(4) operational mode. Maintaining the value of this object across agent reboots is REQUIRED. - Cisco ATM Interface Ilmi Establish Con Poll Interval
- atmIntfIlmiEstablishConPollIntvl 1.3.6.1.2.1.37.1.14.1.14.1.8 (defined in ATM2-MIB)
The amount of time S between successive transmissions of ILMI messages on this interface for the purpose of detecting establishment of ILMI connectivity. - Cisco ATM Interface Ilmi Check Con Poll Interval
- atmIntfIlmiCheckConPollIntvl 1.3.6.1.2.1.37.1.14.1.14.1.9 (defined in ATM2-MIB)
The amount of time T between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The distinguished value zero disables ILMI connectivity procedures on this interface. - hp Switch Ip Timep Poll Interval
- hpSwitchIpTimepPollInterval 1.3.6.1.4.1.11.2.14.11.5.1.7.1.5.3 (defined in hpprocurve-config)
The client poll interval of the Time server in minute. - hp Switch Ip Statistic Timep Poll Interval
- hpSwitchIpStatTimepPollInterval 1.3.6.1.4.1.11.2.14.11.5.1.9.2.3 (defined in hpprocurve-stat)
The current client poll interval of the Time server in minute. - hp Switch Ip Timep Poll Interval
- hpSwitchIpTimepPollInterval 1.3.6.1.4.1.11.2.14.11.5.1.7.1.5.3 (defined in hpprocurve-v2-config)
The client poll interval of the Time server in minute. - hp Switch Ip Status Timep Poll Interval
- hpSwitchIpStatTimepPollInterval 1.3.6.1.4.1.11.2.14.11.5.1.9.2.3 (defined in hpprocurve-v2-stat)
The current client poll interval of the Time server in minute. - Juniper Ospfv3 If Poll Interval
- jnxOspfv3IfPollInterval 1.3.6.1.4.1.2636.5.4.1.1.7.1.11 (defined in JUNIPER-OSPFV3-MIB)
The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor. - Switch L3ospf If Poll Interval
- swL3ospfIfPollInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.11 (defined in DES3528-SWL3MGMT-MIB)
The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. - Switch L3ospf If Poll Interval
- swL3ospfIfPollInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.11 (defined in DES3552-SWL3MGMT-MIB)
The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. - Switch L3ospf If Poll Interval
- swL3ospfIfPollInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.11 (defined in DES3612-SWL3MGMT-MIB)
The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. - Switch L3ospf If Poll Interval
- swL3ospfIfPollInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.11 (defined in DES3627-SWL3MGMT-MIB)
The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. - Switch L3ospf If Poll Interval
- swL3ospfIfPollInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.11 (defined in DES3650-SWL3MGMT-MIB)
The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. - Switch SNTP Poll Interval
- swSNTPPollInterval 1.3.6.1.4.1.171.12.10.11.5 (defined in DLINK-TIME-MIB)
Update time in seconds from SNTP server. - Switch L3ospf If Poll Interval
- swL3ospfIfPollInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.11 (defined in SWL3MGMT-MIB)
The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.
