The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port if index
- Sys Bridge Port If Index
- a3ComSysBridgePortIfIndex 1.3.6.1.4.1.43.29.4.10.3.1.3 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
The value of the MIB-II ifIndex corresponding to the bridge port identified by this entry. - Sys Token Ring Port If Index
- a3ComSysTokenRingPortIfIndex 1.3.6.1.4.1.43.29.4.13.2.1.2 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The value of the MIB-II ifIndex corresponding to the token ring port identified by this entry. - a3 Com Sys Token Ring Port If Index
- a3ComSysTokenRingPortIfIndex 1.3.6.1.4.1.43.29.4.13.2.1.2 (defined in A3COM-SWITCHING-SYSTEMS-TOKEN-RING-MIB)
The value of the MIB-II ifIndex corresponding to the token ring port identified by this entry. - dot1d Base Port If Index
- dot1dBasePortIfIndex 1.3.6.1.2.1.17.1.4.1.2 (defined in BRIDGE-MIB)
The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port. - m013 IP Router If Logical Port Index
- m013IPRouterIfLogicalPortIndex 1.3.6.1.4.1.800.2.25.9.1.1.2 (defined in XYLAN-M013-MIB)
A per-slot unique HDLC channel number. - wsm Port If Index
- wsmPortIfIndex 1.3.6.1.4.1.800.2.7.1.1.1.9 (defined in XYLAN-WSM-MIB)
The ifIndex of the WAN port. This parameter is used in order to get the physical port Index used for SNMP standard MIBs that use ifIndex instead of slot/port. - port If Index
- portIfIndex 1.3.6.1.4.1.43.1.12.3.1.1.4.1.1.5 (defined in 3comab9300)
Currently this object applies to the interface ports in port cards ONLY. It is pre-assigned as following: slot range 3 1..8 4 9..16 5 17..24 6 25..32 7 33..40 8 41..48 9 49..57 ::= { portBaseEntry 5 } -- virtual circuit table -- Multi/Non-multi cast virtual circuit Path table SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION This unique value which identified the next available virtual circuit ID. It is allowed NMS manager to get the next available Virtual Circuit Id before created a new row into Virtual circuit Path Table. - dot1d Base Port If Index
- dot1dBasePortIfIndex 1.3.6.1.2.1.17.1.4.1.2 (defined in rfc1493)
The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port. - Cabletron Virtual If Port If Index
- ctVirtualIfPortIfIndex 1.3.6.1.4.1.52.4.3.3.7.2.1.1 (defined in ctif-ext-mib)
Returns the virtual If Index. - Cabletron IF Remap2 Port Index
- ctIFRemap2PortIndex 1.3.6.1.4.1.52.4.1.1.14.1.2.1.2 (defined in ctron-if-remap-2-mib)
Defines an port that is remappable or is able to accept a remapped packet. Ideally indices will start with 1 and will be numbered continuously through the number of available remap ports. However, this need not necessarily be the case. Indices may be sparse and begin with any number if desired for a particular implementation. - Cabletron Trunk Port Remote If Index
- ctTrunkPortRemoteIfIndex 1.3.6.1.4.1.52.4.1.2.20.1.1.4.1.1 (defined in ctron-smarttrunk-mib)
The ifIndex of the interface at the other end of this part of the trunk link. If this value is 0, then for some reason there is no interface on the other side of this link. This might be a temporary condition or it might represent a real problem. Note: this table is indexed by ifIndex. So the index is the local ifIndex value and ctTrunkPortRemoteIfIndex is the remote ifIndex. - sys Hw Port If Index
- sysHwPortIfIndex 1.3.6.1.4.1.52.2501.1.1.3.1.5 (defined in ctron-ssr-hardware-mib)
The value of ifIndex used to access this port in the Interface MIB. - agent Port If Index
- agentPortIfIndex 1.3.6.1.4.1.14179.1.2.12.1.2 (defined in AIRESPACE-SWITCHING-MIB)
The switch's Port IfIndex - Cisco 2900 Port If Index
- c2900PortIfIndex 1.3.6.1.4.1.9.9.87.1.4.1.1.25 (defined in CISCO-C2900-MIB)
The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port.
