The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port row status
- ses Port Bonding Row Status
- sesPortBondingRowStatus 1.3.6.1.4.1.890.1.5.5.1.5.1.5 (defined in ZYXEL-SESCOMMON-MIB)
To delete an existing row in this table. - p NHRP Port Row Status
- pNHRPPortRowStatus 1.3.6.1.4.1.800.3.2.4.1.1.2.2.1.7 (defined in PNHRP-MIB)
This object is used to create or delete entries in the pNHRPPortTable - port Physical X25 Admin Row Status
- portPhyX25AdminRowStatus 1.3.6.1.4.1.173.7.3.1.1.1.11 (defined in netlink-specific-mib)
This variable is used to manage the creation and deletion of conceptual rows in the portPhyX25AdminTable and follows the SNMPv2 RowStatus conventions by supporting the following values: - `active', which indicates that the conceptual row is available for use by the managed device, and which is supplied by a management station wishing to exercise an on-line update of the existing conceptual row. For a management protocol set operation, a genErr response is returned when the row does not exist. - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device. For a management protocol set operation, a genErr response is returned when the row already exists. - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Note that all of the above values may be specified in a management protocol set operation, and only the 'active' value will be returned in response to a management protocol retrieval operation. For a management protocol set operation, if other variable bindings are included in the same PDU, then a genErr response is returned. - port Logical X25 Admin Row Status
- portLogicalX25AdminRowStatus 1.3.6.1.4.1.173.7.3.1.3.1.5 (defined in netlink-specific-mib)
This variable is used to manage the creation and deletion of conceptual rows in the portLogicalX25AdminTable and follows the SNMPv2 RowStatus conventions by supporting the following values: - `active', which indicates that the conceptual row is available for use by the managed device, and which is supplied by a management station wishing to exercise an on-line update of the existing conceptual row. For a management protocol set operation, a genErr response is returned when the row does not exist. - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device. For a management protocol set operation, a genErr response is returned when the row already exists. - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Note that all of the above values may be specified in a management protocol set operation, and only the 'active' value will be returned in response to a management protocol retrieval operation. For a management protocol set operation, if other variable bindings are included in the same PDU, then a genErr response is returned. - port Frame Relay Row Status
- portFrRowStatus 1.3.6.1.4.1.173.7.3.2.1.1.13 (defined in netlink-specific-mib)
This variable is used to manage the creation and deletion of conceptual rows in the portFrConfigTable and follows the SNMPv2 RowStatus conventions by supporting the following values: - `active', which indicates that the conceptual row is available for use by the managed device, and which is supplied by a management station wishing to exercise an on-line update of the existing conceptual row. For a management protocol set operation, a genErr response is returned when the row does not exist. - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device. For a management protocol set operation, a genErr response is returned when the row already exists. - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Note that all of the above values may be specified in a management protocol set operation, and only the 'active' value will be returned in response to a management protocol retrieval operation. For a management protocol set operation, if other variable bindings are included in the same PDU, then a genErr response is returned. - port DLCI Row Status
- portDLCIRowStatus 1.3.6.1.4.1.173.7.3.2.2.1.12 (defined in netlink-specific-mib)
This variable is used to manage the creation and deletion of conceptual rows in the portDLCIConfigTable and follows the SNMPv2 RowStatus conventions by supporting the following values: - `active', which indicates that the conceptual row is available for use by the managed device. For a management protocol set operation, a genErr response is returned when the row does not exist. - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device. For a management protocol set operation, a genErr response is returned when the row already exists. - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Note that all of the above values may be specified in a management protocol set operation, and only the 'active' value will be returned in response to a management protocol retrieval operation. For a management protocol set operation, if other variable bindings are included in the same PDU, then a genErr response is returned. Also note that deleting a DLCI entry will only remove it from the database file, and it's existence will still be known by the protocol until the node is rebooted. - port Frame Relay Backup Row Status
- portFrBackupRowStatus 1.3.6.1.4.1.173.7.3.2.3.1.7 (defined in netlink-specific-mib)
This variable is used to manage the creation and deletion of conceptual rows in the portFrBackupGroupTable and follows the SNMPv2 RowStatus conventions by supporting the following values: - `active', which indicates that the conceptual row is available for use by the managed device. For a management protocol set operation, a genErr response is returned when the row does not exist. - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device. For a management protocol set operation, a genErr response is returned when the row already exists. - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Note that all of the above values may be specified in a management protocol set operation, and only the 'active' value will be returned in response to a management protocol retrieval operation. For a management protocol set operation, if other variable bindings are included in the same PDU, then a genErr response is returned. - port Bsci Admin Row Status
- portBsciAdminRowStatus 1.3.6.1.4.1.173.7.3.4.1.1.28 (defined in netlink-specific-mib)
This variable is used to manage the creation and deletion of conceptual rows in the portBsciAdminTable and follows the SNMPv2 RowStatus conventions by supporting the following values: - `active', which indicates that the conceptual row is available for use by the managed device, and which is supplied by a management station wishing to exercise an on-line update of the existing conceptual row. For a management protocol set operation, a genErr response is returned when the row does not exist. - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device. For a management protocol set operation, a genErr response is returned when the row already exists. - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Note that all of the above values may be specified in a management protocol set operation, and only the 'active' value will be returned in response to a management protocol retrieval operation. For a management protocol set operation, if other variable bindings are included in the same PDU, then a genErr response is returned. - port Sdlc Admin Row Status
- portSdlcAdminRowStatus 1.3.6.1.4.1.173.7.3.5.1.1.13 (defined in netlink-specific-mib)
This variable is used to manage the creation and deletion of conceptual rows in the portSdlcAdminTable and follows the SNMPv2 RowStatus conventions by supporting the following values: - `active', which indicates that the conceptual row is available for use by the managed device, and which is supplied by a management station wishing to exercise an on-line update of the existing conceptual row. For a management protocol set operation, a genErr response is returned when the row does not exist. - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device. For a management protocol set operation, a genErr response is returned when the row already exists. - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Note that all of the above values may be specified in a management protocol set operation, and only the 'active' value will be returned in response to a management protocol retrieval operation. For a management protocol set operation, if other variable bindings are included in the same PDU, then a genErr response is returned. - port Voice Admin Row Status
- portVoiceAdminRowStatus 1.3.6.1.4.1.173.7.3.8.1.1.35 (defined in netlink-specific-mib)
This variable is used to manage the creation and deletion of conceptual rows in the portVoiceAdminTable and follows the SNMPv2 RowStatus conventions by supporting the following values: - `active', which indicates that the conceptual row is available for use by the managed device, and which is supplied by a management station wishing to exercise an on-line update of the existing conceptual row. For a management protocol set operation, a genErr response is returned when the row does not exist. - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device. For a management protocol set operation, a genErr response is returned when the row already exists. - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Note that all of the above values may be specified in a management protocol set operation, and only the 'active' value will be returned in response to a management protocol retrieval operation. For a management protocol set operation, if other variable bindings are included in the same PDU, then a genErr response is returned. - Enterasys Cos Transmit Queue Port Group Row Status
- etsysCosTxqPortGroupRowStatus 1.3.6.1.4.1.5624.1.2.55.1.4.7.1.2 (defined in enterasys-class-of-service-mib)
This object allows for the dynamic creation and deletion of entries within the etsysCosTxqPortTypeTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. When this object's value is active(1) the specified dot1dBridge ports listed in the etsysCosTxqPortGroupList shall be removed from etsysCosTxqPortGroupUnselectedPorts. A row in transition to the active(1) state will have its port group list validated before activation. A port list that cannot be made active MUST result in the row state to become notReady(3) and no configuration action will be taken for this row. Rows not in the active(1) state SHALL NOT be persisted across entity resets and MUST return the ports from its port group list to the etsysCosTxqPortGroupUnselectedPorts. When this object's value is set to destroy(6) from an active(1) state, all ports contained in etsysCosTxqPortList shall be returned to the etsysCosTxqPortGroupUnselectedPorts and all entries referencing this row shall be removed as well. - Enterasys Cos Inbound Rate Limiting Port Group Row Status
- etsysCosIrlPortGroupRowStatus 1.3.6.1.4.1.5624.1.2.55.1.5.7.1.2 (defined in enterasys-class-of-service-mib)
This object allows for the dynamic creation and deletion of entries within the etsysCosIrlPortGroupTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. When this object's value is active(1) the specified dot1dBridge ports listed in the PortGroupList shall be removed from UnselectedPorts. A row in transition to the active(1) state will have its port group list validated before activation. A port list that cannot be made active MUST result in the row state to become notReady(3) and no configuration action will be taken for this row. Rows not in the active(1) state SHALL NOT be persisted across entity resets and MUST return the ports from its port group list to the etsysCosIrlPortTypeUnselectedPorts. When this object's value is set to destroy(6) from an active(1) state, all dot1dBridge ports contained in etsysCosIrlPortGroupList shall be returned to the etsysCosIrlPortTypeUnselectedPorts and all entries referencing this row shall be removed as well. - Enterasys Cos Outbound Rate Limiter Port Group Row Status
- etsysCosOrlPortGroupRowStatus 1.3.6.1.4.1.5624.1.2.55.1.6.7.1.2 (defined in enterasys-class-of-service-mib)
This object allows for the dynamic creation and deletion of entries within the etsysCosOrlPortGroupTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. When this object's value is active(1) the specified dot1dBridge ports listed in the PortGroupList shall be removed from UnselectedPorts. A row in transition to the active(1) state will have its port group list validated before activation. A port list that cannot be made active MUST result in the row state to become notReady(3) and no configuration action will be taken for this row. Rows not in the active(1) state SHALL NOT be persisted across entity resets and MUST return the ports from its port group list to the etsysCosOrlPortTypeUnselectedPorts. When this object's value is set to destroy(6) from an active(1) state, all dot1dBridge ports contained in etsysCosOrlPortGroupList shall be returned to the etsysCosOrlPortTypeUnselectedPorts and all entries referencing this row shall be removed as well. - Enterasys Cos Flood Control Port Group Row Status
- etsysCosFloodCtrlPortGroupRowStatus 1.3.6.1.4.1.5624.1.2.55.1.7.7.1.2 (defined in enterasys-class-of-service-mib)
This object allows for the dynamic creation and deletion of entries within the etsysCosFloodCtrlPortGroupTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. When this object's value is active(1) the specified dot1dBridge ports listed in the PortGroupList shall be removed from UnselectedPorts. A row in transition to the active(1) state will have its port group list validated before activation. A port list that cannot be made active MUST result in the row state to become notReady(3) and no configuration action will be taken for this row. Rows not in the active(1) state SHALL NOT be persisted across entity resets and MUST return the ports from its port group list to the etsysCosFloodCtrlPortTypeUnselectedPorts. When this object's value is set to destroy(6) from an active(1) state, all dot1dBridge ports contained in etsysCosFloodCtrlPortGroupList shall be returned to the etsysCosFloodCtrlPortTypeUnselectedPorts and all entries referencing this row shall be removed as well. - Enterasys Mirror Destination Port Row Status
- etsysMirrorDestinationPortRowStatus 1.3.6.1.4.1.5624.1.2.72.2.3.1.2 (defined in enterasys-mirror-config-mib)
This object manages the creation and deletion of this entry. active(1) -- Indicates that this entry is available for use by the managed device. notInService(2) -- Indicates that this entry exists in the agent but is not available for use by the managed device. notReady(3) -- Entry is missing information in order to be available for use by the managed device. A transition to this state will happen when the etsysMirrorDestinationIfIndex object for this entry is 0 (zero). createAndGo(4) -- A new entry will be created in this table and the new entry will transition to the active state. createAndWait(5) -- A new entry will be created in this table and the new entry will transition to the notInService state. destroy(6) -- Deletes this row. - Cisco Distributed Director Server Port Row Status
- cddServerPortRowStatus 1.3.6.1.4.1.9.9.197.1.3.2.1.14 (defined in CISCO-DIST-DIRECTOR-MIB)
The status of the row. This object is used to create a new row or delete an existing row in this table. - Cisco Distributed Director Server Port Metric Row Status
- cddServerPortMetricRowStatus 1.3.6.1.4.1.9.9.197.1.3.3.1.3 (defined in CISCO-DIST-DIRECTOR-MIB)
The status of the row. This object is used to create a new row or delete an existing row in this table.
