The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port trap
- xylan Filter Last Commit Trap Port
- xylanFltLastCommitTrapPort 1.3.6.1.4.1.800.2.22.4.3.4 (defined in XYLAN-FLT-MIB)
COMMIT trap; the value depends on the value of the last xylanFltLastCommitTrapReason. These are: 0 - The data is invalid. 1 - This data item is unused. 2 - This data item is unused. 3 - This data item is unused. 4 - The port that was assigned to two services. 5 - This data item is unused. 6 - This data item is unused. - health Threshold Port Trap Slot
- healthThreshPortTrapSlot 1.3.6.1.4.1.800.2.18.6.13 (defined in XYLAN-HEALTH-MIB)
Number of the slot with threshold crossing data in port-level rising/falling threshold trap. This object is not intended to be accessed directly. It is defined for use in module-level rising/falling threshold traps. - health Threshold Port Trap Count
- healthThreshPortTrapCount 1.3.6.1.4.1.800.2.18.6.14 (defined in XYLAN-HEALTH-MIB)
Number of threshold crossing entries in port-level rising/falling threshold trap. This object is not intended to be accessed directly. It is defined for use in port-level rising/falling threshold traps. - health Threshold Port Trap Data
- healthThreshPortTrapData 1.3.6.1.4.1.800.2.18.6.15 (defined in XYLAN-HEALTH-MIB)
Contents of port-level rising/falling threshold trap. The format is as follows: Octet 1: length including this octet (L) Octets 2 - L: port threshold trap data, consisting of threshold crossing entries Within each threshold crossing entry, the format is as follows: Octet 1: length including this octet (l) Octet 2: type of threshold crossing Threshold crossing types are: Rx rising threshold = 1 Rx falling threshold = 2 RxTx rising threshold = 3 RxTx falling threshold = 4 Bkpl rising threshold = 5 Bkpl falling threshold = 6 Vcc rising threshold = 7 Vcc falling threshold = 8 Octets 3 - l: port bit mask This bit mask is ((N-1)/8)+1 octets long, where N is the number of ports on the module. Each port is represented by one bit in the mask. The bit for port 1 is the leftmost bit in octet 1 of the bit mask. The bit for port 8 is the rightmost bit in octet 1 of the bit mask. The bit for port 9 is the leftmost bit in octet 2 of the bit mask, and so on. Only those thresholds for which a threshold crossing event is detected will be present. This object is not intended to be accessed directly. It is defined for use in port-level rising/falling threshold traps. - Xylan Pnni Trap Pn Port Id
- xPnniTrapPnPortId 1.3.6.1.4.1.800.3.2.1.2.1.1.6.1 (defined in XYLANPNNI-MIB)
On a trap condition, this identifies the port-related variable. - xylan XIP GMAP Last Trap Port
- xylanXIPGMAPLastTrapPort 1.3.6.1.4.1.800.2.20.1.6 (defined in XYLAN-XIP-MIB)
GMAP change was not applied because of a conflict. - xylan XIP XMAP Last Trap Port
- xylanXIPXMAPLastTrapPort 1.3.6.1.4.1.800.2.20.2.5 (defined in XYLAN-XIP-MIB)
changed. - environmental monitor Trap Port Type
- apEnvMonTrapPortType 1.3.6.1.4.1.9148.3.3.3.6 (defined in ACMEPACKET-ENVMON-MIB)
The port type which causes the trap to occur. - sys Ip Config Trap Client Port Number
- sysIpConfigTrapClientPortNumber 1.3.6.1.4.1.43.1.12.3.1.1.1.3.3.1.4 (defined in 3comab9300)
Trap client's port number. - sys Trap Port
- sysTrapPort 1.3.6.1.4.1.97.1.6 (defined in ct-els10-mib)
- Cabletron If Port Trap Status
- ctIfPortTrapStatus 1.3.6.1.4.1.52.4.3.3.3.1.1.5 (defined in ctif-ext-mib)
Defines the trap forwarding status of the port. A value of (1) indicates that a trap WILL NOT be sent if the port goes down and a value of (2) which is the default value, indicates that a trap WILL be sent if the port goes down. - sfcs Bandwidth Port Pool Trap Management Pool Index
- sfcsBwPortPoolTrapMgmtPoolIndex 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.2 (defined in ctron-sfcs-mib)
This index specifies which Pool within Port we are dealing with. This reference is in the same format as MIB II's Interface index. (If it has never been set, the value will be -1.) - sfcs Bandwidth Port Pool Trap Management Allocation Bandwidth Threshold high Forward
- sfcsBwPortPoolTrapMgmtAllocBwTholdHiFwd 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.3 (defined in ctron-sfcs-mib)
The upper threshold for the Alloc BW fwd trap. When an allocation causes the currently allocated bw to exceed this value the trap is generated. (If it has never been set, the value will be -1.) - sfcs Bandwidth Port Pool Trap Management Hold Down Time
- sfcsBwPortPoolTrapMgmtHoldDownTime 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.9 (defined in ctron-sfcs-mib)
The time between traps of the same type. If a trap of a particular type is generated for a particular port, another of that type for that port will not be generated until the hold down time has expired. (If it has never been set, the value will be -1.) - sfcs Bandwidth Port Pool Trap Management CBR Connection Count Threshold Low Forward
- sfcsBwPortPoolTrapMgmtCBRConnCntTholdLoFwd 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.12 (defined in ctron-sfcs-mib)
The lower threshold for the CBR connection count Fwd trap. When an allocation causes the CBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) - sfcs Bandwidth Port Pool Trap Management CBR Allocation Bandwidth Threshold Low Forward
- sfcsBwPortPoolTrapMgmtCBRAllocBwTholdLoFwd 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.16 (defined in ctron-sfcs-mib)
The lower threshold for the CBR Allocated Bw Fwd trap. When an allocation causes the CBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) - sfcs Bandwidth Port Pool Trap Management ABR Connection Count Threshold high Forward
- sfcsBwPortPoolTrapMgmtABRConnCntTholdHiFwd 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.18 (defined in ctron-sfcs-mib)
The upper threshold for the ABR connection count Fwd trap. When an allocation causes the ABR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) - sfcs Bandwidth Port Pool Trap Management ABR Allocation Bandwidth Threshold high Forward
- sfcsBwPortPoolTrapMgmtABRAllocBwTholdHiFwd 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.22 (defined in ctron-sfcs-mib)
The upper threshold for the ABR Allocated Bw Fwd trap. When an allocation causes the ABR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) - sfcs Bandwidth Port Pool Trap Management VBR Connection Count Threshold Low Forward
- sfcsBwPortPoolTrapMgmtVBRConnCntTholdLoFwd 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.28 (defined in ctron-sfcs-mib)
The lower threshold for the VBR connection count Fwd trap. When an allocation causes the VBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) - sfcs Bandwidth Port Pool Trap Management VBR Connection Count Threshold Low Revision
- sfcsBwPortPoolTrapMgmtVBRConnCntTholdLoRev 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.29 (defined in ctron-sfcs-mib)
The lower threshold for the VBR connection count Rev trap. When an allocation causes the VBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) - sfcs Bandwidth Port Pool Trap Management VBR Allocation Bandwidth Threshold Low Forward
- sfcsBwPortPoolTrapMgmtVBRAllocBwTholdLoFwd 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.32 (defined in ctron-sfcs-mib)
The lower threshold for the VBR Allocated Bw Fwd trap. When an allocation causes the VBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) - sfcs Bandwidth Port Pool Trap Management UBR Connection Count Threshold Low Forward
- sfcsBwPortPoolTrapMgmtUBRConnCntTholdLoFwd 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.36 (defined in ctron-sfcs-mib)
The lower threshold for the UBR connection count Fwd trap. When an allocation causes the UBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) - sfcs Bandwidth Port Pool Trap Management UBR Allocation Bandwidth Threshold Low Forward
- sfcsBwPortPoolTrapMgmtUBRAllocBwTholdLoFwd 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.40 (defined in ctron-sfcs-mib)
The lower threshold for the UBR Allocated Bw Fwd trap. When an allocation causes the UBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) - sfcs BW Port Pool Trap Management Buffer Low Threshold
- sfcsBWPortPoolTrapMgmtBuffLoThold 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.43 (defined in ctron-sfcs-mib)
The lower threshold for buffer allocation trap . - Token Ring Port Station Insertion Trap Enable
- tRingPortStnInsertionTrapEnable 1.3.6.1.4.1.52.4.1.2.1.1.3.2.1.1.7 (defined in dot5-log-mib)
A write of enabled to this object permits the port inserted and port deinserted traps to be sent when phantom current has been asserted or removed, respectively, on this station port. A write of disabled prevents the traps from being sent. The default state of this object is disabled. - dot5 Physical Management Port Station Insertion Trap Enable
- dot5PhysMgmtPortStnInsertionTrapEnable 1.3.6.1.4.1.52.4.1.1.6.1.3.2.1.1.5 (defined in dot5-phys-mib)
A write of enabled or disabled to this object permits or inhibits the sending of the port inserted and port deinserted traps when phantom current is asserted or removed, respectively, on this station port, provided the MIM on which this port is resident falls within the domain of the device. If the MIM falls outside of the domain of the device, the SNMP error BadValue will be returned. When read this object will repond with the last write request made. The default state of this object is disabled. - Repeater Port Group Hw Trap Set Link
- rptrPortGrpHwTrapSetLink 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.2 (defined in repeater-rev4-mib)
Enables and disables link traps for the specified port group. Setting a value of disable(1) is equivalent to setting all instances of rptrPortHwTrapSetLink to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rptrPortHwTrapSetLink to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortHwTrapSetLink for this port group are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortHwTrapSetLink for this port group are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortHwTrapSetLink for this port group are not currently set to a value the same value. - Repeater Port Group Source Address Trap Set Group Id
- rptrPortGrpSaTrapSetGrpId 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1.1 (defined in repeater-rev4-mib)
Returns an index to a port group for which the information in this table pertains. - Repeater Port Hw Trap Set Link
- rptrPortHwTrapSetLink 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.3 (defined in repeater-rev4-mib)
Enables and disables link traps for this port. - Repeater Port Hw Trap Set Segment
- rptrPortHwTrapSetSeg 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.4 (defined in repeater-rev4-mib)
Enables and disables segmentation traps for this port. - Repeater Port Source Address Trap Set Port Id
- rptrPortSaTrapSetPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.1 (defined in repeater-rev4-mib)
Returns an index to a port for which the information in this table pertains. - Enterasys Ietf Bridge Dot1d Base Port New Learned Address Trap
- etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap 1.3.6.1.4.1.5624.1.2.31.1.2.1.1.1 (defined in enterasys-ietf-bridge-mib-ext-mib)
The status of the new learned address notification feature on this port. When etsysIetfBridgeDot1qNewLearnedAddrTrapEnable and this object are both set to enabled the agent will generate an etsysIetfBridgeDot1qFdbNewLearnedAddr notification for each new entry in the dot1qTpFdbTable with a dot1qTpFdbStatus value equal to learned(3) and a dot1qTpFdbPort value equal to this row's dot1dBasePort value. Setting this object to disabled will prevent the agent from generating etsysIetfBridgeDot1qFdbNewLearnedAddr notifications for this port. If etsysIetfBridgeDot1qNewLearnedAddrTrapEnable is set to disabled, setting this object to enabled will have no effect. Notification generation is not required to match new address rate of learning. A best effort delivery queue is acceptable. - Enterasys Ietf Bridge Dot1d Base Port Moved Address Trap
- etsysIetfBridgeDot1dBasePortMovedAddrTrap 1.3.6.1.4.1.5624.1.2.31.1.2.1.1.2 (defined in enterasys-ietf-bridge-mib-ext-mib)
The status of the moved address notification feature on this port. When etsysIetfBridgeDot1qMovedAddrTrapEnable and this object are both set to enabled the agent will generate an etsysIetfBridgeDot1qFdbMovedAddr notification for each entry in the dot1qTpFdbTable that has a dot1qTpFdbStatus value equal to learned(3) and a dot1qTpFdbPort value equal to this row's dot1dBasePort value when it is detected that the corresponding dot1qTpFdbAddress has moved to this row's dot1dBasePort from another port. Setting this object to disabled will prevent the agent from generating etsysIetfBridgeDot1qFdbMovedAddr notifications for this port. If etsysIetfBridgeDot1qMovedAddrTrapEnable is set to disabled, setting this object to enabled will have no effect. Notification generation is not required to match the dot1qTpFdbTable entry modification rate. A best effort delivery queue is acceptable. - Enterasys Multi Authentication Port Trap Enable
- etsysMultiAuthPortTrapEnable 1.3.6.1.4.1.5624.1.2.46.1.2.1.1.6 (defined in enterasys-multi-auth-mib)
This object allows for the enabling or disabling of each trap on a per interface basis. Setting a given bit to a value of 1 allows traps of that type to be sent for events on that interface. Setting a given bit to a value of 0 disallows traps of that type to be sent for events on that interface. The individual bits correlate to specific traps as follows: BIT NOTIFICATION ---------------------------------------------------------------- authSuccessTrap(0) etsysMultiAuthSuccess authFailedTrap(1) etsysMultiAuthFailed authTerminatedTrap(2) etsysMultiAuthTerminated maxNumUsersReachedTrap(3) etsysMultiAuthMaxNumUsersReached DEFVAL { { } } ::= { etsysMultiAuthPortEntry 6 } SYNTAX SEQUENCE OF EtsysMultiAuthPortTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION A table of per port, per authentication type information. - Enterasys Multi Authentication Port Trap Group
- etsysMultiAuthPortTrapGroup 1.3.6.1.4.1.5624.1.2.46.2.1.3 (defined in enterasys-multi-auth-mib)
This group of objects for all devices supporting per interface SNMP notifications. - agent Snmp Trap Port Number
- agentSnmpTrapPortNumber 1.3.6.1.4.1.14179.1.2.5.1 (defined in AIRESPACE-SWITCHING-MIB)
Snmp Trap Port Number - agent Port Link Trap Mode
- agentPortLinkTrapMode 1.3.6.1.4.1.14179.1.2.12.1.9 (defined in AIRESPACE-SWITCHING-MIB)
If enabled, link up and link down traps will be sent for this port. - bsn AP Port Number Trap Variable
- bsnAPPortNumberTrapVariable 1.3.6.1.4.1.14179.2.6.2.32 (defined in AIRESPACE-WIRELESS-MIB)
