OIDs - primary_port
The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for primary port
- eth Chnl Primary Port Entry
- ethChnlPriPortEntry 1.3.6.1.4.1.800.2.3.5.1.1 (defined in ECHANNEL)
An Ether Channel Primary Port entry. - gm Auto Service Primary Port
- gmAutoServicePrimaryPort 1.3.6.1.4.1.800.2.2.10.14.1.3 (defined in XYLAN-VLAN-MIB)
Primary port on which this service will be activated. - Cabletron ATM Physical Redundancy Primary Port
- ctATMPhyRedundPrimaryPort 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.2 (defined in ctatm-config-mib)
The physical port number to be used as the primary port. The primary port is the default port to become active and the port of priority, i.e. regardless of the status of the current active port, if the primary can be used (and Redundancy is set up to activate it when it becomes available--see ctATMPhyRedundPrimaryRevert), it will be. The write will NOT take effect immediately. It will wait until the NEXT time that the redundancy algorithm determines that the primary port should be used. This object is persistent. i.e., it will retain its value between powerdowns. - sfps Connection Primary In Port
- sfpsConnectionPrimInPort 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.3 (defined in ctron-sfps-connection-mib)
Identifies the primary inbound SFPS switch port. - sfps Connection Primary Out Port
- sfpsConnectionPrimOutPort 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.4 (defined in ctron-sfps-connection-mib)
Identifies the primary outbound SFPS switch port. All switched traffic for this connection will be transmitted on this outbound port. - sfps Connection Lookup API Primary In Port
- sfpsConnectionLookupAPIPrimInPort 1.3.6.1.4.1.52.4.2.4.2.1.3.2.5 (defined in ctron-sfps-connection-mib)
Source port number - sfps Connection Lookup API Primary Out Port
- sfpsConnectionLookupAPIPrimOutPort 1.3.6.1.4.1.52.4.2.4.2.1.3.2.6 (defined in ctron-sfps-connection-mib)
Destination port number. If -1, denotes multiple out ports. - sfps L4 CP Flow Primary Protocol Port
- sfpsL4CPFlowPrimProtPort 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.8 (defined in ctron-sfps-l4ss-mib)
If this is a TCP or UDP entry, this value indicates the protocol port number of the primary endpoint. Otherwise, this field is zero. - sfps RA Topology Agent Port Primary Switch
- sfpsRATopAgentPortPrimarySwitch 1.3.6.1.4.1.52.4.2.4.2.2.3.12.3.2.2.1.7 (defined in ctron-sfps-topology-mib)
BaseMAC Address of switch providing connectivity - sfps RA Topology Agent Port Table API Out Primary Switch
- sfpsRATopAgentPortTableAPIOutPrimarySwitch 1.3.6.1.4.1.52.4.2.4.2.2.3.12.3.2.4.7 (defined in ctron-sfps-topology-mib)
BaseMAC address of switch providing connectivity - backup Primary Port Group
- backupPriPortGroup 1.3.6.1.4.1.52.259.10.3.5.1.1.1.2 (defined in elh100-mib)
Group ID of the primary port. Attempts to set this object to a nonexistent group are rejected with an error-status of badValue(3). If this object belongs to an empty entry, it returns a value of 255. - backup Primary Port Port
- backupPriPortPort 1.3.6.1.4.1.52.259.10.3.5.1.1.1.3 (defined in elh100-mib)
Port number of the primary port. Attempts to set this object to a nonexistent port are rejected with an error-status of badValue(3). If this object belongs to an empty entry, it returns a value of 255.