The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for serial port
- wsm Port Serial Rx Clock Polarity
- wsmPortSerialRxClockPol 1.3.6.1.4.1.800.2.7.1.1.1.5 (defined in XYLAN-WSM-MIB)
The receive clock polarity. It is inverted or not inverted. For interfaces that do not support this, the value will be stored but ignored. - wsm Port Serial Tx Clock Polarity
- wsmPortSerialTxClockPol 1.3.6.1.4.1.800.2.7.1.1.1.6 (defined in XYLAN-WSM-MIB)
The Transmit clock polarity. It is inverted or not inverted. For interfaces that do not support this, the value will be stored but ignored. - Host Resources Device Serial Port
- hrDeviceSerialPort 1.3.6.1.2.1.25.3.1.17 (defined in HOST-RESOURCES-TYPES)
The device type identifier used for a serial port. - Compaq Specific PC Server Serial Port A Control
- cpqSiSerialPortAControl 1.3.6.1.4.1.232.2.2.3.6 (defined in CPQSINFO)
The state of the access control for the primary serial port interface embedded in the Compaq system board. - Compaq Specific PC Server Serial Port B Control
- cpqSiSerialPortBControl 1.3.6.1.4.1.232.2.2.3.7 (defined in CPQSINFO)
The state of the access control for the secondary serial port interface embedded in the Compaq system board. - Compaq Standard PC Server Equipment Serial Port Table
- cpqSeSerialPortTable 1.3.6.1.4.1.232.1.2.9.1 (defined in CPQSTDEQ)
A table of serial port descriptions. - Compaq Standard PC Server Equipment Serial Port Entry
- cpqSeSerialPortEntry 1.3.6.1.4.1.232.1.2.9.1.1 (defined in CPQSTDEQ)
A description of a serial port. - Compaq Standard PC Server Equipment Serial Port Index
- cpqSeSerialPortIndex 1.3.6.1.4.1.232.1.2.9.1.1.1 (defined in CPQSTDEQ)
An index that uniquely specifies this entry. - Compaq Standard PC Server Equipment Serial Port Address
- cpqSeSerialPortAddr 1.3.6.1.4.1.232.1.2.9.1.1.2 (defined in CPQSTDEQ)
The I/O port address used by this serial port. - Compaq Standard PC Server Equipment Serial Port Description
- cpqSeSerialPortDesc 1.3.6.1.4.1.232.1.2.9.1.1.3 (defined in CPQSTDEQ)
A text description of further information known about the serial port. This may be an empty string if no further information is known. - Compaq Standard PC Server Equipment Serial Port Hw Location
- cpqSeSerialPortHwLocation 1.3.6.1.4.1.232.1.2.9.1.1.4 (defined in CPQSTDEQ)
A text description of the hardware location, on complex multi SBB hardware only, for the serial port. A NULL string indicates that the hardware location could not be determined or is irrelevant. - serial Port Number Of Valid Entries
- serialPortNumOfValidEntries 1.3.6.1.4.1.351.110.4.1.2 (defined in BASIS-SERIAL-MIB)
This object contains number of serial ports. This identifies the number of entries in serialInterfacetable. - serial Port Number
- serialPortNum 1.3.6.1.4.1.351.110.4.1.1.1.1 (defined in BASIS-SERIAL-MIB)
This object identifies the serial port number. The value 1 is used for Console Port. The Console Port is also known as control port(CP). The value 2 is used for Maintenance Port and this can be used as SLIP (Serial Line Internet Protocol) interface. The Maintenance Port is also known as Modem Port(MP). - serial Port Type
- serialPortType 1.3.6.1.4.1.351.110.4.1.1.1.2 (defined in BASIS-SERIAL-MIB)
This object identifies the type of port. main(1) : This is applicable for Maintenance Port debug(2) : This is applicable for Console Port. - serial Port Enable
- serialPortEnable 1.3.6.1.4.1.351.110.4.1.1.1.3 (defined in BASIS-SERIAL-MIB)
This object is used for enabling/disabling serial port. - Cisco Blocked Serial Tunneling Port Table
- bstunPortTable 1.3.6.1.4.1.9.9.35.1.3.1 (defined in CISCO-BSTUN-MIB)
A list of BSTUN-enabled interfaces (ports). - Cisco Blocked Serial Tunneling Port Entry
- bstunPortEntry 1.3.6.1.4.1.9.9.35.1.3.1.1 (defined in CISCO-BSTUN-MIB)
Status and parameter values for a BSTUN port. - Cisco Blocked Serial Tunneling Port Group Number
- bstunPortGroupNumber 1.3.6.1.4.1.9.9.35.1.3.1.1.1 (defined in CISCO-BSTUN-MIB)
The group number to which the bstun port belongs. Frames will only be routed to other ports (on this or another router) in the same bstun group. This group should match a bstunGroupIndex in the bstunGroupTable. - Cisco Blocked Serial Tunneling Port Default Peer Type
- bstunPortDefaultPeerType 1.3.6.1.4.1.9.9.35.1.3.1.1.2 (defined in CISCO-BSTUN-MIB)
The type of identification of the remote default partner. (This is as configured with the 'route all' command.) If ip then the value is in bstunPortDefaultPeerIP; if serial or serialDirect then the value is in bstunPortDefaultPeerSerial. - Cisco Blocked Serial Tunneling Port Default Peer IP
- bstunPortDefaultPeerIP 1.3.6.1.4.1.9.9.35.1.3.1.1.3 (defined in CISCO-BSTUN-MIB)
The ip address of the remote default BSTUN partner, for unrecognized addresses. 0.0.0.0 if partner address type is not ip. - Cisco Blocked Serial Tunneling Port Default Peer Serial
- bstunPortDefaultPeerSerial 1.3.6.1.4.1.9.9.35.1.3.1.1.4 (defined in CISCO-BSTUN-MIB)
If bstunRouteType is serial then this is the serial interface index of the point-to-point link to the remote partner; if bstunRouteType is serialDirect then the partner is in the local BSTUN. if bstunRouteType is ip then this field is 0. - Cisco Blocked Serial Tunneling Route BIP Local Port
- bstunRouteBIPLocalPort 1.3.6.1.4.1.9.9.35.1.4.1.1.16 (defined in CISCO-BSTUN-MIB)
If bstunRouteType is bip then this is the local port used when connecting to the remote peer. - Cisco Blocked Serial Tunneling Route BIP Foreign Port
- bstunRouteBIPForeignPort 1.3.6.1.4.1.9.9.35.1.4.1.1.17 (defined in CISCO-BSTUN-MIB)
If bstunRouteType is bip then this is the for port used to connect to the remote peer. - Cisco Blocked Serial Tunneling Port Group
- bstunPortGroup 1.3.6.1.4.1.9.9.35.3.2.3 (defined in CISCO-BSTUN-MIB)
A collection of objects providing information about BSTUN enabled interfaces.
