The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for temperature threshold
- access Switch Sys Temperature High Threshold
- accessSwitchSysTempHighThresh 1.3.6.1.4.1.890.1.5.1.1.6.1.5 (defined in ZYXEL-accessSwitch-MIB)
The high threshold of the temperature in Celsius. If the current temperature is higher than the threshold, the device will initiate the overheat trap. - health Threshold Device Temperature Limit
- healthThreshDeviceTemperatureLimit 1.3.6.1.4.1.800.2.18.6.17 (defined in XYLAN-HEALTH-MIB)
Device temperature threshold value. Units are degrees Centigrade. - Compaq Server Health Temperature Threshold
- cpqHeTemperatureThreshold 1.3.6.1.4.1.232.6.2.6.8.1.5 (defined in CPQHLTH)
This is the shutdown threshold temperature sensor setting in degrees celsius. This is the temerature in which the sensor will be considered to be in a failed state thus causing the system to be shutdown. If this value cannot be determined by software, then a value of -1 will be returned. Only the Ambient zone type allows setting of the threshold temperature. - Compaq Server Health Temperature Threshold Type
- cpqHeTemperatureThresholdType 1.3.6.1.4.1.232.6.2.6.8.1.7 (defined in CPQHLTH)
This specifies the type of this instance of temperature sensor. This value will be one of the following: other(1) Temperature threshold type could not be determined. blowout(5) If a blowout(5) temperature sensor reaches its threshold, the fan or fans in the area of the temperature sensor will increase in speed in an attempt to reduce the temperature before a caution or critical threshold is reached. caution(9) If a caution(9) temperature sensor reaches its threshold, the cpqHeTemperatureCondition will be set to degraded(3) and the system will either continue or shutdown depending on the setting of cpqHeThermalDegradedAction. critical(15) If a critical(15) temperature sensor reaches its threshold, the cpqHeTemperatureCondition will be set to failed(4) and the system will shutdown. - Compaq Rack Common Enclosure Temperature Threshold
- cpqRackCommonEnclosureTempThreshold 1.3.6.1.4.1.232.22.2.3.1.2.1.7 (defined in CPQRACK)
This is the threshold temperature sensor setting in degrees celsius. This is the temperature in which the sensor will be considered to be in a tripped state this causing some action to occur depending on the type of the sensor. The action of temperature sensor threshold will be indicated by the cpqRackCommonEnclosureTempType item. If the type is blowout(5), then the temperature sensor will cause the fans to speed up. If the type is caution(9), then the temperature sensor is in a degraded state. If the type is critical(15), then the server will be considered as in a failed state. If this value cannot be determined by software, then a value of -1 will be returned. - Cisco 6400NSP Chassis Temperature Intake Minor Threshold
- c64ChassisTempIntakeMinorThreshold 1.3.6.1.4.1.9.10.27.1.2.1.3 (defined in CISCO-6400-CHASSIS-MIB)
temperature alarm threshold in degrees centigrade. The default value is ???. - Cisco 6400NSP Chassis Temperature Intake Major Threshold
- c64ChassisTempIntakeMajorThreshold 1.3.6.1.4.1.9.10.27.1.2.1.4 (defined in CISCO-6400-CHASSIS-MIB)
temperature alarm threshold in degrees centigrade. The default value is ???. - Cisco 6400NSP Chassis Temperature Core Minor Threshold
- c64ChassisTempCoreMinorThreshold 1.3.6.1.4.1.9.10.27.1.2.1.5 (defined in CISCO-6400-CHASSIS-MIB)
temperature alarm threshold in degrees centigrade. The default value is ???. - Cisco 6400NSP Chassis Temperature Core Major Threshold
- c64ChassisTempCoreMajorThreshold 1.3.6.1.4.1.9.10.27.1.2.1.6 (defined in CISCO-6400-CHASSIS-MIB)
temperature alarm threshold in degrees centigrade. The default value is ???. - Cisco 6400NSP Chassis Temperature Threshold Admin
- c64ChassisTempThresholdAdmin 1.3.6.1.4.1.9.10.27.1.2.1.7 (defined in CISCO-6400-CHASSIS-MIB)
threshold limit. Bit 0, if set to 0 disable the intake minor threshold otherwise enable it. Bit 1, if set to 0 disable the intake major threshold otherwise enable it. Bit 2, if set to 0 disable the core minor threshold otherwise enable it. Bit 3, if set to 0 disable the core major threshold otherwise enable it. - cisco Environmental Monitor Temperature Threshold
- ciscoEnvMonTemperatureThreshold 1.3.6.1.4.1.9.9.13.1.3.1.4 (defined in CISCO-ENVMON-MIB)
The highest value that the associated instance of the object ciscoEnvMonTemperatureStatusValue may obtain before an emergency shutdown of the managed device is initiated. - Juniper Dom Current Module Temperature High Alarm Threshold
- jnxDomCurrentModuleTemperatureHighAlarmThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.21 (defined in JUNIPER-DOM-MIB)
Module temperature high alarm threshold. - Juniper Dom Current Module Temperature Low Alarm Threshold
- jnxDomCurrentModuleTemperatureLowAlarmThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.22 (defined in JUNIPER-DOM-MIB)
Module temperature low alarm threshold. - Juniper Dom Current Module Temperature High Warning Threshold
- jnxDomCurrentModuleTemperatureHighWarningThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.23 (defined in JUNIPER-DOM-MIB)
Module temperature high warning threshold. - Juniper Dom Current Module Temperature Low Warning Threshold
- jnxDomCurrentModuleTemperatureLowWarningThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.24 (defined in JUNIPER-DOM-MIB)
Module temperature low warning threshold.
