The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for traffic descriptor
- PNNIx Node Svcc Traffic Descriptor Index
- pnnixNodeSvccTrafficDescriptorIndex 1.3.6.1.4.1.800.3.2.1.1.1.5.1.5 (defined in XPNNI-MIB)
An index into the atmTrafficDescrParamTable defined in RFC 1695. This traffic descriptor is used when establishing switched virtual channels for use as SVCC-based RCCs to/from PNNI logical group nodes. - atmx Virtual Channel Connection Acceptable Transmit Traffic Descriptor
- atmxVccAcceptableTransmitTrafficDescriptor 1.3.6.1.4.1.800.2.4.5.1.1.25 (defined in XYLAN-ATM-MIB)
The virtual channel connection traffic descriptor for this connection. - atmx Virtual Channel Connection Actual Transmit Traffic Descriptor
- atmxVccActualTransmitTrafficDescriptor 1.3.6.1.4.1.800.2.4.5.1.1.37 (defined in XYLAN-ATM-MIB)
The virtual channel connection traffic descriptor for this connection. - atmx Address Requested Receive Traffic Descriptor Param1
- atmxAddressRequestedReceiveTrafficDescriptorParam1 1.3.6.1.4.1.800.2.4.6.1.1.16 (defined in XYLAN-ATM-MIB)
The address receive parameter 1 cell rate in cells/second for this SVC. - atmx Address Acceptable Receive Traffic Descriptor
- atmxAddressAcceptableReceiveTrafficDescriptor 1.3.6.1.4.1.800.2.4.6.1.1.27 (defined in XYLAN-ATM-MIB)
The address receive traffic descriptor for this SVC. - atmx Traffic Descriptor Parameter Entry
- atmxTrafficDescrParamEntry 1.3.6.1.4.1.800.2.9.1.8.1.1 (defined in XYLAN-CSM-MIB)
This list contains ATM traffic descriptor type and the associated parameters. - atmx Vcl Receive Traffic Descriptor Index
- atmxVclReceiveTrafficDescrIndex 1.3.6.1.4.1.800.2.9.1.3.1.1.8 (defined in XYLAN-CSM-MIB)
The value of this object identifies the row in the ATM Traffic Descriptor Table which applies to the receive direction of this VCL. - Xylan ATM Vp Cross Connect Low Tx Traffic Descriptor Index
- xylnatmVpCrossConnectLowTxTrafficDescrIndex 1.3.6.1.4.1.800.2.9.1.14.1.1.9 (defined in XYLAN-CSM-MIB)
The transmit traffic descriptor index. The reason why we duplicate this index is to allow the user to change the traffic descriptor without deleting the connection AND without any changes to the RFC1695.mib. RFC1695 describes the traffic descriptor indices only the vcl/vpl tables. Hence if the user wishes to change the TD after creating the cross-connection, then the user has to delete the cross connection to ensire that the receive direction of the low end of the cross connect is equal to the transmit direction of the other VCL at the high end of the cross connect. 10/18/96. Since we dont want to create Vcl without cross connecting them, NMS will now call this table which would allow the creation/deletion and modification of Cross Connect Entries. - atm No Traffic Descriptor
- atmNoTrafficDescriptor 1.3.6.1.2.1.37.1.1.1 (defined in rfc1695)
This identifies the no ATM traffic descriptor type. Parameters 1, 2, 3, 4, and 5 are not used. This traffic descriptor type can be used for best effort traffic. - atm Traffic Descriptor Type
- atmTrafficDescrType 1.3.6.1.2.1.37.1.5.1.2 (defined in rfc1695)
The value of this object identifies the type of ATM traffic descriptor. The type may indicate no traffic descriptor or traffic descriptor with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmTrafficDescrParam1 atmTrafficDescrParam2 atmTrafficDescrParam3 atmTrafficDescrParam4 atmTrafficDescrParam5. - atm Traffic Descriptor Param3
- atmTrafficDescrParam3 1.3.6.1.2.1.37.1.5.1.5 (defined in rfc1695)
The third parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType. - atm Accounting Transmit Traffic Descriptor Parameter 1
- atmAcctngTransmitTrafficDescriptorParam1 1.3.6.1.4.1.9.10.18.1.1.20 (defined in ATM-ACCOUNTING-INFORMATION-MIB)
The first traffic descriptor parameter in the direction in which this switch transmits cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngTransmitTrafficDescriptorType. - atm Accounting Receive Traffic Descriptor Parameter 1
- atmAcctngReceiveTrafficDescriptorParam1 1.3.6.1.4.1.9.10.18.1.1.26 (defined in ATM-ACCOUNTING-INFORMATION-MIB)
The first traffic descriptor parameter in the direction in which this switch receives cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngReceiveTrafficDescriptorType. - Cisco ATM Forum Vpc Receive Traffic Descriptor Param5
- atmfVpcReceiveTrafficDescriptorParam5 1.3.6.1.4.1.353.2.4.1.1.15 (defined in ATM-FORUM-MIB)
The fifth parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType. - Cisco ATM Forum Virtual Channel Connection Transmit Traffic Descriptor Param2
- atmfVccTransmitTrafficDescriptorParam2 1.3.6.1.4.1.353.2.5.1.1.7 (defined in ATM-FORUM-MIB)
The second parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType. - Cisco ATM Forum Virtual Channel Connection Receive Traffic Descriptor Param1
- atmfVccReceiveTrafficDescriptorParam1 1.3.6.1.4.1.353.2.5.1.1.12 (defined in ATM-FORUM-MIB)
The first parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType. - Cisco ATM Traffic Descriptor Parameter 5
- atmTrafficDescrParam5 1.3.6.1.2.1.37.1.5.1.7 (defined in ATM-MIB)
The fifth parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType. - Cisco ATM Vcl Receive Traffic Descriptor Index
- atmVclReceiveTrafficDescrIndex 1.3.6.1.2.1.37.1.7.1.6 (defined in ATM-MIB)
The value of this object identifies the row in the ATM Traffic Descriptor Table which applies to the receive direction of this VCL. - Cisco ATM Traffic Descriptor Group
- atmTrafficDescrGroup 1.3.6.1.2.1.37.2.1.2 (defined in ATM-MIB)
A collection of objects providing information about ATM traffic descriptor type and the associated parameters. - Cisco ATM No Traffic Descriptor
- atmNoTrafficDescriptor 1.3.6.1.2.1.37.1.1.1 (defined in ATM-TC-MIB)
This identifies the no ATM traffic descriptor type. Parameters 1, 2, 3, 4, and 5 are not used. This traffic descriptor type can be used for best effort traffic. - Cisco ATM Traffic Descriptor Parameter Ext Table
- atmTrafficDescrParamExtTable 1.3.6.1.4.1.9.10.11.1.2.1 (defined in CISCO-ATM-TRAFFIC-MIB)
Provide additional information specifying traffic parameters for a VC/VP. - Cisco ATM Traffic Descriptor Parameter Ext Entry
- atmTrafficDescrParamExtEntry 1.3.6.1.4.1.9.10.11.1.2.1.1 (defined in CISCO-ATM-TRAFFIC-MIB)
An entry in the Traffic Parameter Descriptor extension table. - Cisco ATM Traffic Descriptor Name
- atmTrafficDescriptorName 1.3.6.1.4.1.9.10.11.1.2.1.1.3 (defined in CISCO-ATM-TRAFFIC-MIB)
A human readable string that contains the unique name of this Traffic Descriptor. This object will return a zero-length string if value is not set. - pnni Node Svcc Traffic Descriptor Index
- pnniNodeSvccTrafficDescriptorIndex 1.3.6.1.4.1.353.5.4.1.1.5.1.5 (defined in PNNI-MIB)
An index into the atmTrafficDescrParamTable defined in RFC 1695. This traffic descriptor is used when establishing switched virtual channels for use as SVCC-based RCCs to/from PNNI logical group nodes.
