The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for window size
- lapb Admn Transmit K Window Size
- lapbAdmnTransmitKWindowSize 1.3.6.1.2.1.10.16.1.1.6 (defined in rfc1381)
The default transmit window size for this Interface. This is the maximum number of unacknowledged sequenced PDUs that may be outstanding from this DTE at any one time. - lapb Admn Receive K Window Size
- lapbAdmnReceiveKWindowSize 1.3.6.1.2.1.10.16.1.1.7 (defined in rfc1381)
The default receive window size for this Interface. This is the maximum number of unacknowledged sequenced PDUs that may be outstanding from the DCE/remote DTE at any one time. - lapb Operation Transmit K Window Size
- lapbOperTransmitKWindowSize 1.3.6.1.2.1.10.16.2.1.6 (defined in rfc1381)
The current PDU window size this Interface uses to transmit. This is the maximum number of unacknowledged sequenced PDUs that may be outstanding from this DTE at any one time. - lapb Operation Receive K Window Size
- lapbOperReceiveKWindowSize 1.3.6.1.2.1.10.16.2.1.7 (defined in rfc1381)
The current receive PDU window size for this Interface. This is the maximum number of unacknowledged sequenced PDUs that may be outstanding from the DCE/remote DTE at any one time. - x25 Call Parm In Window Size
- x25CallParmInWindowSize 1.3.6.1.2.1.10.5.9.1.6 (defined in rfc1382)
The receive window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use 2. - x25 Call Parm Out Window Size
- x25CallParmOutWindowSize 1.3.6.1.2.1.10.5.9.1.7 (defined in rfc1382)
The transmit window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use 2. - ALTIGA Pptp Statistics Session Local Window Size
- alPptpStatsSessionLocalWindowSize 1.3.6.1.4.1.3076.2.1.2.3.3.1.13 (defined in ALTIGA-PPTP-STATS-MIB)
The number of received data packets this system will buffer for this session, as indicated in the setup packets for this session. - ALTIGA Pptp Statistics Session Peer Window Size
- alPptpStatsSessionPeerWindowSize 1.3.6.1.4.1.3076.2.1.2.3.3.1.14 (defined in ALTIGA-PPTP-STATS-MIB)
The number of received data packets the peer will buffer for this session, as indicated in the setup packets for this session. - Cisco Call Admission Control Sys Sliding Window Size
- ccacSysSlidingWindowSize 1.3.6.1.4.1.9.9.322.1.1.1.1.8 (defined in CISCO-CAC-SYSTEM-MIB)
This object defines the time length for each step in a sliding window of ccacSysCallSpike. - Cisco DSPU Node Default Pu Window Size
- dspuNodeDefaultPuWindowSize 1.3.6.1.4.1.9.9.24.1.1.7 (defined in CISCO-DSPU-MIB)
Send/receive window size to be used across the link between the default-PU and a remote PU. - Cisco DSPU Pu Admin Window Size
- dspuPuAdminWindowSize 1.3.6.1.4.1.9.9.24.1.4.1.1.9 (defined in CISCO-DSPU-MIB)
Send/Receive window size to be used across the link between this dspuNode and the remote PU. - Cisco DSPU Pu Operation Window Size
- dspuPuOperWindowSize 1.3.6.1.4.1.9.9.24.1.4.2.1.9 (defined in CISCO-DSPU-MIB)
Send/Receive window size to be used across the link between this dspuNode and the remote PU. - Cisco Entity Diagnostics HM Test Threshold Window Size
- ceDiagHMTestThreshWindowSize 1.3.6.1.4.1.9.9.350.1.7.2.1.8 (defined in CISCO-ENTITY-DIAG-MIB)
This object indicates the sliding history window size. When the value of ceDiagHMTestThreshWindowSuite is 'default', the user cannot set any value for this object. The value of zero (0) cannot be set. - Cisco GDOI Management Gdoi Ks Tek Window Size
- cgmGdoiKsTekWindowSize 1.3.6.1.4.1.9.9.759.1.3.4.1.8 (defined in CISCO-GDOI-MIB)
The size of the Time Based Anti-Replay (TBAR) window used by this TEK Policy. - Cisco GDOI Management Gdoi Gm Tek Window Size
- cgmGdoiGmTekWindowSize 1.3.6.1.4.1.9.9.759.1.3.6.1.8 (defined in CISCO-GDOI-MIB)
The size of the Time Based Anti-Replay (TBAR) window used by this TEK Policy/SA. - l2t History Window Size
- l2tHistoryWindowSize 1.3.6.1.4.1.2.6.119.4.7.1.1.9 (defined in ibm-ibml2tp)
The window size of the L2T Tunnel History Table (l2tHistTunnelTable) and the L2T Session History Table (l2tHistSessTable). When retrieved by an SNMP GET or GET-NEXT request, this number specifies the maximum number of entries which will be maintained in each of these tables. When modified by an SNMP SET request, the device will set the value of this object as close as possible to the requested value based on implementation and available resources. - l2t Authentication Fail Window Size
- l2tAuthFailWindowSize 1.3.6.1.4.1.2.6.119.4.7.1.1.10 (defined in ibm-ibml2tp)
The window size of the L2T Tunnel Authentication Failure Table (l2tAuthFailTunnelTable) and the L2T User Authentication Failure Table (l2tAuthFailUserTable). When retrieved by an SNMP GET or GET-NEXT request, this number specifies the maximum number of entries which will be maintained in each of these tables. When modified by an SNMP SET request, the device will set the value of this object as close as possible to the requested value based on implementation and available resources. - Juniper L2tp Tunnel Stats Window Size
- jnxL2tpTunnelStatsWindowSize 1.3.6.1.4.1.2636.3.49.1.1.3.1.16 (defined in JNX-L2TP-MIB)
This object contains the send window size for this tunnel. - appn Dna Default Recv Frm Network Window Size
- appnDnaDefaultRecvFrmNetworkWindowSize (defined in Nortel-Magellan-Passport-AppnMIB)
This attribute indicates the default number of data packets that can be received by the DTE from the DCE before more packets can be received. This view is oriented with respect to the DTE. - appn Dna Default Send To Network Window Size
- appnDnaDefaultSendToNetworkWindowSize (defined in Nortel-Magellan-Passport-AppnMIB)
This attribute indicates the number of data packets that can be transmitted from the DTE to the DCE and must be acknowledged before more packets can be transmitted. - appn Logical Channel Number Vc Local Tx Window Size
- appnLcnVcLocalTxWindowSize (defined in Nortel-Magellan-Passport-AppnMIB)
This attribute displays the send window size provided on incoming call packets or the default when a call request packet does not explicitly provide the window size. - appn Logical Channel Number Vc Local Rx Window Size
- appnLcnVcLocalRxWindowSize (defined in Nortel-Magellan-Passport-AppnMIB)
This attribute displays the receive window size provided on incoming call packets or the default when a call request does not explicitly provide the window sizes. - appn Logical Channel Number Vc Subnet Tx Window Size
- appnLcnVcSubnetTxWindowSize (defined in Nortel-Magellan-Passport-AppnMIB)
This attribute displays the current send window size of Vc. - appn Logical Channel Number Vc Subnet Rx Window Size
- appnLcnVcSubnetRxWindowSize (defined in Nortel-Magellan-Passport-AppnMIB)
This attribute displays the receive window size provided on incoming call packets and to the default when a call request does not explicitly provide the window sizes. - Frame Relay Uni Sig Window Size
- frUniSigWindowSize (defined in Nortel-Magellan-Passport-FrameRelayUniMIB)
This attribute specifies the window size. This is the maximum number of unacknowledged sequenced frames that may be outstanding from or to this interface at any one time. - General Vc Interface Logical Channel Number Vc Local Tx Window Size
- gvcIfLcnVcLocalTxWindowSize (defined in Nortel-Magellan-Passport-GeneralVcInterfaceMIB)
This attribute displays the send window size provided on incoming call packets or the default when a call request packet does not explicitly provide the window size. - General Vc Interface Logical Channel Number Vc Local Rx Window Size
- gvcIfLcnVcLocalRxWindowSize (defined in Nortel-Magellan-Passport-GeneralVcInterfaceMIB)
This attribute displays the receive window size provided on incoming call packets or the default when a call request does not explicitly provide the window sizes. - General Vc Interface Logical Channel Number Vc Subnet Tx Window Size
- gvcIfLcnVcSubnetTxWindowSize (defined in Nortel-Magellan-Passport-GeneralVcInterfaceMIB)
This attribute displays the current send window size of Vc. - General Vc Interface Logical Channel Number Vc Subnet Rx Window Size
- gvcIfLcnVcSubnetRxWindowSize (defined in Nortel-Magellan-Passport-GeneralVcInterfaceMIB)
This attribute displays the receive window size provided on incoming call packets and to the default when a call request does not explicitly provide the window sizes. - General Vc Interface Dna Default Recv Frm Network Window Size
- gvcIfDnaDefaultRecvFrmNetworkWindowSize (defined in Nortel-Magellan-Passport-GeneralVcInterfaceMIB)
This attribute indicates the default number of data packets that can be received by the DTE from the DCE before more packets can be received. This view is oriented with respect to the DTE. - General Vc Interface Dna Default Send To Network Window Size
- gvcIfDnaDefaultSendToNetworkWindowSize (defined in Nortel-Magellan-Passport-GeneralVcInterfaceMIB)
This attribute indicates the number of data packets that can be transmitted from the DTE to the DCE and must be acknowledged before more packets can be transmitted. - gsm Cs Rlp Iwf To Ms Window Size
- gsmCsRlpIwfToMsWindowSize (defined in Nortel-Magellan-Passport-GsmIwfMIB)
This attribute specifies the maximum number of sequentially numbered Information (I) frames that may be outstanding (that is, unacknowledged) at any given time from the IWF to the mobile station. GSM specification 4.22 defines the range as 0 to 61. During the Exchange Information (XID) negotiation, both Radio Link Protocol (RLP) entities (mobile station and IWF) can agree to use a specific window size. The IWF attempts to negotiate to the value specified by this attribute. The negotiated value can be viewed in the component GsmIwfRlpOp attribute iwfToMsWindowSize. Changes to this attribute do not effect existing calls. - gsm Cs Rlp Ms To Iwf Window Size
- gsmCsRlpMsToIwfWindowSize (defined in Nortel-Magellan-Passport-GsmIwfMIB)
This attribute specifies the maximum number of sequentially numbered Information (I) frames that may be outstanding (that is, unacknowledged) at any given time from the mobile station to IWF. GSM specification 4.22 defines the range as 0-61. During the Exchange Information (XID) negotiation, both Radio Link Protocol (RLP) entities (mobile station and IWF) can agree to use a specific window size. The IWF attempts to negotiate to the value specified by this attribute. The negotiated value can be viewed in the component GsmIwfRlpOp attribute msToIwfWindowSize. Changes to this attribute do not effect existing calls. - gsm Bc Rlp Iwf To Ms Window Size
- gsmBcRlpIwfToMsWindowSize (defined in Nortel-Magellan-Passport-GsmIwfMIB)
This attribute indicates the current IWF to mobile window size negotiated by the Radio Link Protocol (RLP) during Exchange Information (XID). The window size is the maximum number of sequentially numbered Information (I) frames that may be unacknowledged at any given time. GSM specification 4.22 defines the range as 0 to 61. The value used for XID negotiations can be provisioned by component GsmIwfRadioLinkProtocol attribute iwftoMsWindowSize. - gsm Bc Rlp Ms To Iwf Window Size
- gsmBcRlpMsToIwfWindowSize (defined in Nortel-Magellan-Passport-GsmIwfMIB)
This attribute indicates the current mobile to IWF window size negotiated by the Radio Link Protocol (RLP), during Exchange Information (XID). The window size is the maximum number of sequentially numbered Information (I) frames that may be unacknowledged at any given time. GSM specification 4.22 defines the range as 0 to 61. The value used for XID negotiations can be provisioned by component GsmIwfRadioLinkProtocol attribute msToIwfWindowSize. - ipivc Dna Default Recv Frm Network Window Size
- ipivcDnaDefaultRecvFrmNetworkWindowSize (defined in Nortel-Magellan-Passport-IpiVcMIB)
This attribute indicates the default number of data packets that can be received by the DTE from the DCE before more packets can be received. This view is oriented with respect to the DTE. - ipivc Dna Default Send To Network Window Size
- ipivcDnaDefaultSendToNetworkWindowSize (defined in Nortel-Magellan-Passport-IpiVcMIB)
This attribute indicates the number of data packets that can be transmitted from the DTE to the DCE and must be acknowledged before more packets can be transmitted. - ipivc Logical Channel Number Vc Local Tx Window Size
- ipivcLcnVcLocalTxWindowSize (defined in Nortel-Magellan-Passport-IpiVcMIB)
This attribute displays the send window size provided on incoming call packets or the default when a call request packet does not explicitly provide the window size. - ipivc Logical Channel Number Vc Local Rx Window Size
- ipivcLcnVcLocalRxWindowSize (defined in Nortel-Magellan-Passport-IpiVcMIB)
This attribute displays the receive window size provided on incoming call packets or the default when a call request does not explicitly provide the window sizes. - ipivc Logical Channel Number Vc Subnet Tx Window Size
- ipivcLcnVcSubnetTxWindowSize (defined in Nortel-Magellan-Passport-IpiVcMIB)
This attribute displays the current send window size of Vc. - ipivc Logical Channel Number Vc Subnet Rx Window Size
- ipivcLcnVcSubnetRxWindowSize (defined in Nortel-Magellan-Passport-IpiVcMIB)
This attribute displays the receive window size provided on incoming call packets and to the default when a call request does not explicitly provide the window sizes. - mpanl Sig Window Size
- mpanlSigWindowSize (defined in Nortel-Magellan-Passport-MpaNetworkLinkMIB)
This attribute specifies the window size. This is the maximum number of unacknowledged sequenced frames that may be outstanding from or to this interface at any one time. - tdma Cs Dsc K0 Ll0 Window Size
- tdmaCsDscK0Ll0WindowSize (defined in Nortel-Magellan-Passport-TdmaIwfMIB)
This attribute specifies the maximum size of the DSC logical link 0 window. - tdma Cs Dsc K1 Ll1 Window Size
- tdmaCsDscK1Ll1WindowSize (defined in Nortel-Magellan-Passport-TdmaIwfMIB)
This attribute specifies the maximum size of the DSC logical link 1 window. - tdma Cs V42 Tx K Window Size
- tdmaCsV42TxKWindowSize (defined in Nortel-Magellan-Passport-TdmaIwfMIB)
This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the IWF to the remote entity. The default value is 15 frames, and if this value is used then no Exchange Identification (XID) negotiations are required for txKWindowSize. If the value set for txKWindowSize is other than 15, then XID frames are exchanged to negotiate a value. The value provided for txKWindowSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 15 is specified, then the IWF attempts to negotiate a value between 15 (as a minimum) and the given value (as a maximum). If a value less than 15 is specified, then the IWF attempts to negotiate for a value between the given value (as a minimum) and 15 (as a maximum). Any value can be specified as long at it is within the provisionable limits. However, a value equal to or close to the default is recommended. Changes to this attribute do not affect existing calls. - tdma Cs V42 Rx K Window Size
- tdmaCsV42RxKWindowSize (defined in Nortel-Magellan-Passport-TdmaIwfMIB)
This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the remote entity to the IWF. The default value is 15 frames, and if this value is used then no Exchange Identification (XID) negotiations are required for rxKWindowSize. If the value set for rxKWindowSize is other than 15, then XID frames are exchanged to negotiate a value. The value provided for rxKWindowSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 15 is specified, then the IWF attempts to negotiate a value between 15 (as a minimum) and the given value (as a maximum). If a value less than 15 is specified, then the IWF attempts to negotiate for a value between the given value (as a minimum) and 15 (as a maximum). Any value can be specified as long as it is within the provisionable limits. However, a value equal to or close to the default is recommended. Changes to this attribute do not affect existing calls. - tdma Bc V42 Tx K Window Size
- tdmaBcV42TxKWindowSize (defined in Nortel-Magellan-Passport-TdmaIwfMIB)
This attribute indicates the current value of k, that is negotiated during Exchange Identification (XID). This is the size of flow control sliding window used for the information frames that the V.42 transmits to the PSTN modem. This size governs the maximum number of information frames that the IWF V.42 error- correcting entity can have outstanding (that is, unacknowledged). The value used for XID negotiations can be provisioned via TdmaCs/* V42. - tdma Bc V42 Rx K Window Size
- tdmaBcV42RxKWindowSize (defined in Nortel-Magellan-Passport-TdmaIwfMIB)
This attribute indicates the current value of k that is negotiated during Exchange Identification (XID). This is the size of flow control sliding window used for information frames transmitted from the PSTN modem. This size governs the maximum number of information frames that the peer of the IWF V.42 error-correcting entity can have outstanding (that is, unacknowledged). The value used for XID negotiations can be provisioned via TdmaCs/* V42. - VC Tester Dna Default Recv Frm Network Window Size
- vctDnaDefaultRecvFrmNetworkWindowSize 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.7 (defined in Nortel-Magellan-Passport-VcTesterMIB)
This attribute indicates the default number of data packets that can be received by the DTE from the DCE before more packets can be received. This view is oriented with respect to the DTE. - VC Tester Dna Default Send To Network Window Size
- vctDnaDefaultSendToNetworkWindowSize 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.8 (defined in Nortel-Magellan-Passport-VcTesterMIB)
This attribute indicates the number of data packets that can be transmitted from the DTE to the DCE and must be acknowledged before more packets can be transmitted. - VC Tester Vc Local Tx Window Size
- vctVcLocalTxWindowSize 1.3.6.1.4.1.562.2.4.1.5130.4.10.1.16 (defined in Nortel-Magellan-Passport-VcTesterMIB)
This attribute displays the send window size provided on incoming call packets or the default when a call request packet does not explicitly provide the window size. - VC Tester Vc Local Rx Window Size
- vctVcLocalRxWindowSize 1.3.6.1.4.1.562.2.4.1.5130.4.10.1.17 (defined in Nortel-Magellan-Passport-VcTesterMIB)
This attribute displays the receive window size provided on incoming call packets or the default when a call request does not explicitly provide the window sizes. - VC Tester Vc Subnet Tx Window Size
- vctVcSubnetTxWindowSize 1.3.6.1.4.1.562.2.4.1.5130.4.10.1.24 (defined in Nortel-Magellan-Passport-VcTesterMIB)
This attribute displays the current send window size of Vc. - VC Tester Vc Subnet Rx Window Size
- vctVcSubnetRxWindowSize 1.3.6.1.4.1.562.2.4.1.5130.4.10.1.26 (defined in Nortel-Magellan-Passport-VcTesterMIB)
This attribute displays the receive window size provided on incoming call packets and to the default when a call request does not explicitly provide the window sizes. - x25 Dte In Window Size
- x25DteInWindowSize 1.3.6.1.4.1.562.2.4.1.90.23.1.3 (defined in Nortel-Magellan-Passport-X25DteMIB)
This attribute specifies the maximum receive window size for the X.25 interface. A window size greater than 7 is only valid when the packetSequencing attribute is set to modulo128. - x25 Dte Out Window Size
- x25DteOutWindowSize 1.3.6.1.4.1.562.2.4.1.90.23.1.4 (defined in Nortel-Magellan-Passport-X25DteMIB)
This attribute specifies the maximum transmit window size for the X.25 interface. A window size greater than 7 is only valid when the packetSequencing is set to modulo128. - x25 Dte Peer In Window Size
- x25DtePeerInWindowSize 1.3.6.1.4.1.562.2.4.1.90.2.12.1.3 (defined in Nortel-Magellan-Passport-X25DteMIB)
This attribute specifies the default receive window size. A window size of 0 indicates the inWindowSize setting for the X.25 interface (in the X25Dte component) is used during call setup to the remote host identified by this Peer component. A window size greater than 7 is only valid when the packetSequencing attribute of the X25Dte component is set to modulo128. - x25 Dte Peer Out Window Size
- x25DtePeerOutWindowSize 1.3.6.1.4.1.562.2.4.1.90.2.12.1.4 (defined in Nortel-Magellan-Passport-X25DteMIB)
This attribute specifies the default transmit window size. A window size of 0 indicates the outWindowSize setting for the X.25 interface is used during call setup to the Peer identified by this component. A window size greater than 7 is only valid when the packetSequencing attribute of the X25Dte component is set to modulo128. - x25 Dte P Logical Channel Number In Window Size
- x25DtePLcnInWindowSize 1.3.6.1.4.1.562.2.4.1.90.3.10.1.7 (defined in Nortel-Magellan-Passport-X25DteMIB)
This attribute specifies the maximum receive window size. A inWindowSize greater than 7 is only valid when the packetSequencing attribute of the X25Dte component is set to modulo128. - x25 Dte P Logical Channel Number Out Window Size
- x25DtePLcnOutWindowSize 1.3.6.1.4.1.562.2.4.1.90.3.10.1.8 (defined in Nortel-Magellan-Passport-X25DteMIB)
This attribute specifies the maximum transmit window size. A outWindowSize greater than 7 is only valid when the packetSequencing attribute of the X25Dte component is set to modulo128. - x25 Dte Logical Channel Number In Window Size
- x25DteLcnInWindowSize 1.3.6.1.4.1.562.2.4.1.90.4.11.1.3 (defined in Nortel-Magellan-Passport-X25DteMIB)
This attribute indicates the receive window size. - x25 Dte Logical Channel Number Out Window Size
- x25DteLcnOutWindowSize 1.3.6.1.4.1.562.2.4.1.90.4.11.1.4 (defined in Nortel-Magellan-Passport-X25DteMIB)
This attribute indicates the transmit window size. - x25 Dte Lapb K Window Size
- x25DteLapbKWindowSize 1.3.6.1.4.1.562.2.4.1.90.5.10.1.4 (defined in Nortel-Magellan-Passport-X25DteMIB)
This attribute specifies the window size. This is the maximum number of unacknowledged sequenced frames that may be outstanding from or to this interface at any one time. A window size of greater than 7 is only valid when the sequence numbering of frames is modulo 128. - trace Receiver X25 Dna Default Recv Frm Network Window Size
- traceRcvrX25DnaDefaultRecvFrmNetworkWindowSize 1.3.6.1.4.1.562.2.4.1.106.2.2.2.13.1.7 (defined in Nortel-Magellan-Passport-X25TraceRcvrMIB)
This attribute specifies the default value for the number of data packets that can be send to the interface before any acknowledgment. - trace Receiver X25 Dna Default Send To Network Window Size
- traceRcvrX25DnaDefaultSendToNetworkWindowSize 1.3.6.1.4.1.562.2.4.1.106.2.2.2.13.1.8 (defined in Nortel-Magellan-Passport-X25TraceRcvrMIB)
This attribute specifies the default value for the number of data packets that can be received from the interface before any acknowledgment. - trace Session X25 Vc Local Tx Window Size
- traceSessionX25VcLocalTxWindowSize 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.16 (defined in Nortel-Magellan-Passport-X25TraceRcvrMIB)
This attribute displays the send window size provided on incoming call packets or the default when a call request packet does not explicitly provide the window size. - trace Session X25 Vc Local Rx Window Size
- traceSessionX25VcLocalRxWindowSize 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.17 (defined in Nortel-Magellan-Passport-X25TraceRcvrMIB)
This attribute displays the receive window size provided on incoming call packets or the default when a call request does not explicitly provide the window sizes. - trace Session X25 Vc Subnet Tx Window Size
- traceSessionX25VcSubnetTxWindowSize 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.24 (defined in Nortel-Magellan-Passport-X25TraceRcvrMIB)
This attribute displays the current send window size of Vc. - trace Session X25 Vc Subnet Rx Window Size
- traceSessionX25VcSubnetRxWindowSize 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.26 (defined in Nortel-Magellan-Passport-X25TraceRcvrMIB)
This attribute displays the receive window size provided on incoming call packets and to the default when a call request does not explicitly provide the window sizes. - vsi Session Window Size
- vsiSessionWindowSize 1.3.6.1.4.1.9.9.162.1.2.1.9 (defined in CISCO-VSIMASTER-MIB)
The maximum number of command messages the VSI master will send before requiring a response from slave. If the value is 0, then flow control is not enabled. - cisco Ip M Route Heart Beat Window Size
- ciscoIpMRouteHeartBeatWindowSize 1.3.6.1.4.1.9.10.2.1.1.4.1.4 (defined in CISCO-IPMROUTE-MIB)
Number of ciscoIpMRouteHeartBeatInterval intervals a Cisco multicast router waits before checking if expected number of heartbeat packets are received or not. - Cisco Transaction Connection Server Window Size
- ctcServerWindowSize 1.3.6.1.4.1.9.9.144.1.4.1.9 (defined in CISCO-TRANSACTION-CONNECTION-MIB)
TCP window size for each connection of the Transaction Connection server. - Cisco ITP Monitor Connection Rcv Window Size
- cItpmConnRcvWindowSize 1.3.6.1.4.1.9.9.379.1.1.1.1.6 (defined in CISCO-ITP-MONITOR-MIB)
The size of TCP receive window. This object defines the number of outstanding (unacknowledged) bytes that the ITP monitor can receive on TCP connection. - Cisco IP SLA Video Profile Bitrate Window Size
- cipslaVideoProfileBitrateWindowSize 1.3.6.1.4.1.9.9.766.1.1.1.1.14 (defined in CISCO-IPSLA-VIDEO-PROFILE-MIB)
This object specifies the rate control window size which is used by the video encoder to calculate the running average bit rate. The smaller the value of this bit rate window size, less bursty of the traffic; this bitrate control window size is specified in milliseconds. Value 0 indicates no bitrate window control. - cvpdn Session Local Window Size
- cvpdnSessionLocalWindowSize 1.3.6.1.4.1.9.10.51.1.2.1.1.14 (defined in CISCO-VPDN-MGMT-EXT-MIB)
This object returns the local send window size for this session. If the value of the object cvpdnSessionSequencing is false, then this object should return value zero. - cvpdn Session Remote Window Size
- cvpdnSessionRemoteWindowSize 1.3.6.1.4.1.9.10.51.1.2.1.1.15 (defined in CISCO-VPDN-MGMT-EXT-MIB)
This object returns the initial remote send window size for this session. If the value of the object cvpdnSessionSequencingState is none(1) then this object should not be interpreted. - cvpdn Session Current Window Size
- cvpdnSessionCurrentWindowSize 1.3.6.1.4.1.9.10.51.1.2.1.1.16 (defined in CISCO-VPDN-MGMT-EXT-MIB)
This object returns the local send window size for this session. If the value of the object cvpdnSessionSequencingState is none(1) then this object should not be interpreted. - cvpdn Session Minimum Window Size
- cvpdnSessionMinimumWindowSize 1.3.6.1.4.1.9.10.51.1.2.1.1.17 (defined in CISCO-VPDN-MGMT-EXT-MIB)
This object returns the initial remote send window size for this session. If the value of the object cvpdnSessionSequencingState is none(1) then this object should not be interpreted.
