civrTopologyConfigSwitchVsan2k - Cisco Inter VSAN routing Topology Config Switch Vsan2k - CISCO-IVR-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

civrTopologyConfigSwitchVsan2k

Cisco Inter VSAN routing Topology Config Switch Vsan2k
1.3.6.1.4.1.9.9.371.1.1.5.2.1.3

The list of configured VSANs that are part of IVR topology on this device. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 0 through 7, the second octet specifying VSANs 8 through 15, etc. Within each octet, the most significant bit represents the lowest numbered VSAN, and the least significant bit represents the highest numbered VSAN. Thus, each VSAN, is represented by a single bit within the value of this object. The corresponding VSAN is contained in the IVR topology on this device if and only if that bit has a value of '1'. If this object has a value which is less than 256 bytes long, then the VSANs which are not represented are not considered to be in this list. If the values of both this object and corresponding instance of civrTopologyConfigSwitchVsan4k are zero-length string, then the IVR topology contains only the default VSAN.

Back to CISCO-IVR-MIB MIB page.

IPHost Network monitor allows you to monitor civrTopologyConfigSwitchVsan2k on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco routers right now.

Easy monitoring of civrTopologyConfigSwitchVsan2k with IPHost tools

MIBs list