ACLMGMT-MIB Download
The Structure of Access Control List Information for the
proprietary enterprise.
IPHost Network Monitor offer an easy way of SNMP monitoring your D-Link Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for ACLMGMT-MIB
- swCpuInterfacefilterState
- enable/disable CPU Interface Filtering( also call Software ACL), default is disabled. If enable is configured, the filtering entries in the swAclRuleMgmt tables will be set to action if it's RuleSwAclState is enable.If disable is configured the software A ...
- swCpuAclEthernetEntry
- A list of information about ACL of Ethernet.
- swCpuAclEthernetProfileID
- The ID of ACL mask entry ,and is unique in the mask list.
- swCpuAclEthernetUsevlan
- Specifies that the switch will examine the VLAN part of each packet header.
- swCpuAclEthernetMacAddrMaskState
- This object indicates the status of MAC address mask. other(1) - Neither source MAC address nor destination MAC address are masked. dst-mac-addr(2) - recieved frames's destination MAC address are currently used to be filtered as it meets with the MAC addr ...
- swCpuAclEthernetSrcMacAddrMask
- This object Specifies the MAC address mask for the source MAC address.
- swCpuAclEthernetDstMacAddrMask
- This object Specifies the MAC address mask for the destination MAC address.
- swCpuAclEthernetUse8021p
- Specifies if the switch will examine the 802.1p priority value in the frame's header or not.
- swCpuAclEthernetUseEthernetType
- Specifies if the switch will examine the Ethernet type value in each frame's header or not.
- swCpuAclEthernetRowStatus
- This object indicates the status of this entry.
- swCpuAclIpTable
- This table contain ACL mask of IP information. Access profiles will be created on the switch by row creation and to define which parts of each incoming frame's IP layer part of header the switch will examine. Masks can be entered that will be combined wi ...
- swCpuAclIpEntry
- A list of information about ACL of IP Layer.
- swCpuAclIpProfileID
- The ID of ACL mask entry ,and is unique in the mask list.
- swCpuAclIpUsevlan
- This object indicates if IP layer vlan is examined or not.
- swCpuAclIpIpAddrMaskState
- This object indicates the status of IP address mask. other(1) - Neither source IP address nor destination IP address are masked. dst-ip-addr(2) - recieved frames's destination IP address are currently used to be filtered as it meets with the IP address en ...
- swCpuAclIpSrcIpAddrMask
- This object Specifies IP address mask for the source IP address.
- swCpuAclIpDstIpAddrMask
- This object Specifies the IP address mask for the destination IP address.
- swCpuAclIpUseDSCP
- This object indicates DSCP protocol is is examined or not.
- swCpuAclIpUseProtoType
- That object indicates which protocol will be examined.
- swCpuAclIpIcmpOption
- This object indicates which fields should be filled in of ICMP. none(1)- two fields are null. type(2)- type field should be filled in. code(3)- code field should be filled in. type-code(4)- not only type fileld but code field should be filled in. ::= { sw ...
- swCpuAclIpTcpOption
- This object indicates the status of filtered address of TCP. other(1) - Neither source port nor destination port are masked. dst-addr(2) - recieved frames's destination port are currently used to be filtered . src-addr(3) - recieved frames's source port a ...
- swCpuAclIpUdpOption
- This object indicates the status of filtered address of UDP . other(1) - Neither source port nor destination port are masked. dst-addr(2) - recieved frames's destination port are currently used to be filtered . src-addr(3) - recieved frames's source port ...
- swCpuAclIpTCPorUDPSrcPortMask
- Specifies a TCP port mask for the source port if swCpuAclIpUseProtoType is TCP Specifies a UDP port mask for the source port if swCpuAclIpUseProtoType is UDP. ::= { swCpuAclIpEntry 12 } SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-create STATUS curre ...
- swCpuAclIpTCPFlagBit
- Specifies a TCP connection flag mask.
- swCpuAclIpTCPFlagBitMask
- A value which indicates the set of TCP flags that this entity may potentially offers. The value is a sum. This sum initially takes the value zero, Then, for each flag, L, in the range 1 through 6, that this node performs transactions for, 2 raised to (L ...
- swCpuAclIpProtoIDOption
- Specifies that the switch will examine each frame's Protocol ID field or not.
- swCpuAclIpProtoIDMask
- Specifies that the rule applies to the IP protocol ID and the mask options behind the IP header.
- swCpuAclIpRowStatus
- This object indicates the status of this entry.
- swCpuAclPktContMaskTable
- This table contain ACL mask of user-defined information. Access profiles will be created on the switch by row creation and to define which parts of each incoming frame's user-defined part of header the switch will examine. Masks can be entered that will ...
- swCpuAclPktContMaskEntry
- A list of information about ACL of user-defined.
- swCpuAclPktContMaskProfileID
- The ID of ACL mask entry ,and is unique in the mask list.
- swCpuAclPktContMaskOffset0to15
- Specifies that the rule applies to the packet content(Offset0to15) and the mask options.
- swCpuAclPktContMaskOffset16to31
- Specifies that the rule applies to the packet content(Offset16to31) and the mask options.
- swCpuAclPktContMaskOffset32to47
- Specifies that the rule applies to the packet content(Offset32to47) and the mask options.
- swCpuAclPktContMaskOffset48to63
- Specifies that the rule applies to the packet content(Offset48to63) and the mask options.
- swCpuAclPktContMaskOffset64to79
- Specifies that the rule applies to the packet content(Offset64to79) and the mask options.
- swCpuAclPktContMaskRowStatus
- This object indicates the status of this entry.
- swCpuAclEtherRuleEntry
- A list of information about ACL rule of the layer 2 part of each packet.
- swCpuAclEtherRuleProfileID
- The ID of ACL mask entry ,and is unique in the mask list.
- swCpuAclEtherRuleAccessID
- The ID of ACL rule entry relate to swCpuAclEtherRuleProfileID.
- swCpuAclEtherRuleVlan
- Specifies that the access will apply to only to this VLAN.
- swCpuAclEtherRuleSrcMacAddress
- Specifies that the access will apply to only packets with this source MAC address.
- swCpuAclEtherRuleDstMacAddress
- Specifies that the access will apply to only packets with this destination MAC address.
- swCpuAclEtherRule8021P
- Specifies that the access will apply only to packets with this 802.1p priority value.
- swCpuAclEtherRuleEtherType
- Specifies that the access will apply only to packets with this hexidecimal 802.1Q Ethernet type value in the packet header.
- swCpuAclEtherRulePermit
- This object indicates resoult of examination is permit or deny;default is permit(1) permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that do not match the access profi ...
- swCpuAclEtherRuleEtherPort
- Specifies that the access will apply to only to port(s).
- swCpuAclEtherRuleRowStatus
- This object indicates the status of this entry.
- swCpuAclIpRuleTable
- swCpuAclIpRuleEntry
- swCpuAclIpRuleProfileID
- The ID of ACL mask entry ,and is unique in the mask list.
- swCpuAclIpRuleAccessID
- The ID of CpuAcl IP rule entry .
- swCpuAclIpRuleVlan
- Specifies that the access will apply to only to this VLAN.
- swCpuAclIpRuleSrcIpaddress
- Specific an IP source address.
- swCpuAclIpRuleDstIpaddress
- Specific an IP destination address.
- swCpuAclIpRuleDscp
- Specific the value of dscp, the value can be configured 0 to 63
- swCpuAclIpRuleProtocol
- Specifies the IP protocol which has been configured in swCpuAclIpEntry .
- swCpuAclIpRuleType
- Specific that the rule applies to the value of icmp type traffic.
- swCpuAclIpRuleCode
- Specific that the rule applies to the value of icmp code traffic.
- swCpuAclIpRuleSrcPort
- Specific that the rule applies the range of tcp/udp source port
- swCpuAclIpRuleDstPort
- Specific the range of tcp/udp destination port range
- swCpuAclIpRuleFlagBits
- A value which indicates the set of TCP flags that this entity may potentially offers. The value is a sum. This sum initially takes the value zero, Then, for each flag, L, in the range 1 through 6, that this node performs transactions for, 2 raised to (L ...
- swCpuAclIpRuleProtoID
- Specific that the rule applies to the value of ip protocol id traffic
- swCpuAclIpRuleUserMask
- Specific that the rule applies to the ip protocol id and the range of options behind the IP header.
- swCpuAclIpRulePermit
- This object indicates resoult of examination is permit or deny;default is permit(1) permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that do not match the access profi ...
- swCpuAclIpRulePort
- Specifies that the access will apply to only to port(s).
- swCpuAclIpRuleRowStatus
- This object indicates the status of this entry.
- swCpuAclPktContRuleTable
- This table contain ACL rule of user-defined information.
- swCpuAclPktContRuleEntry
- A list of information about ACL rule of the user-defined part of each packet.
- swCpuAclPktContRuleProfileID
- The ID of ACL mask entry ,and is unique in the mask list.
- swCpuAclPktContRuleAccessID
- The ID of ACL rule entry relate to swCpuAclPktContRuleProfileID.
- swCpuAclPktContRuleOffset0to15
- Specifies that the rule applies to the user-defined packet.
- swCpuAclPktContRuleOffset16to31
- Specifies that the rule applies to the user-defined packet.
- swCpuAclPktContRuleOffset32to47
- Specifies that the rule applies to the user-defined packet.
- swCpuAclPktContRuleOffset48to63
- Specifies that the rule applies to the user-defined packet.
- swCpuAclPktContRuleOffset64to79
- Specifies that the rule applies to the user-defined packet.
- swCpuAclPktContRulePermit
- This object indicates resoult of examination is permit or deny;default is permit(1) permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that do not match the access profi ...
- swCpuAclPktContRulePort
- Specifies that the access will apply to only to port(s).
- swCpuAclPktContRuleRowStatus
- This object indicates the status of this entry.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
