ASKEY-MCAST-MIB

ASKEY-MCAST-MIB Download

MIBs list

Each octet within this value specifies a set of eight ports, with the first octet specifying profiles 1 through 8, the second octet specifying profiles 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered profile, and the least significant bit represents the highest numbered profile. Thus, each profile of the device is represented by a single bit within the value of this object. If that bit has a value of '1' then that profile is included in the set of profiles; the profile is not included if its bit has a value of '0'.

IPHost Network Monitor offer an easy way of SNMP monitoring your D-Link Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for ASKEY-MCAST-MIB

mcastProfileCount
This object respresents the total count of configured multicast profiles.
mcastProfileTable
This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the ADSL line.
mcastProfileEntry
Each entry consists of a list of parameters that represents the configuration of an multicast group.
mProfileId
The unique sequential number for each profile entry, starting from 1 and end with 256, which is referenced one by one by mConfigProfileBitMap(256 bits) in mcastConfigLineEoaTable
mProfileName
This object is used by the multicast configuration table in order to give a row of this table a specific name which is unique. For example: ESPN, HBO...etc.
mProfileIpAddr
The IP address of the multicast stream.
mProfilePriority
The transmit priority applied to this multicast stream The value 0 indicateds the lowest priority, the value 3 indicateds the highest priority
mProfileRowStatus
This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the profile. Before a profile can be deleted or taken out of ...
mcastConfigLineEoaTable
This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the ADSL line.
mcastConfigLineEoaEntry
Each entry consists of a list of parameters that represents the configuration of an multicast group.
mConfigVpi
The VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the atmInterfaceMaxVpiBits.
mConfigVci
The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the atmInterfaceMaxVciBits.
mConfigVlanId
IEEE 802.1q VLAN tag number.
mConfigStreamNum
The maximum number of this multicast stream on the VCL link
mConfigServiceProfile
Each line may book 256 program set, we use 256 bits to save what they booked
mConfigRowStatus
mcastServiceProfileCount
This object respresents the total count of configured multicast service profiles.
mcastServiceProfileTable
This table contains multicast service profiles and each service profile can be defined to represent a set of multicast profiles. One entry in this table reflects a service profile defined by a manager which can be used to assign to each the ADSL subscribe ...
mcastServiceProfileEntry
Each entry consists of a list of parameters that represents the configuration of an multicast group.
mcastServiceProfileName
The profile name is used to be the index of each serive profile. It must be unique and can contains '0'~'9', 'A'~'Z', 'a'~'z', '-','_','.','@' only.
mcastServiceProfileBitMap
Each service profile may book a set of 800 program at most , we use 100 octets to save what it books.
mcastServiceProfileRowStatus
The rowStatus of a mcast service profile. Set rowStatus to createAndGo to create a mcast service profile and set to destory to delete a mcast service profile. If the profile is used by any mcau entry, it is not allowed to be deleted.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list