AT-SYSINFO-MIB Download

fanAndPsRpsConnectionStatus

The status of the Redundant Power Supply (RPS) connection, ie, whether an RPS is actually connected or not, regardless of whether the RPS is on or not. notSupported means that an RPS is not supported in this hardware platform, connected means that the RPS ...

fanAndPsMainPSUStatus

The status of the main Power Supply. on means that the power supply is present and fully operational. off means that the power supply is totally off (and obviously only applies to systems with a redundant power supply). faulty means that the main power su ...

fanAndPsRedundantPSUStatus

The status of the redundant Power Supply. notSupported means this device does not support redundant power supplies, on means that the redundant power supply is connected and able to supply system power if required, off means that the redundant power suppl ...

fanAndPsRpsMonitoringStatus

The current status of redundant power supply monitoring. The monitoring of the redundant power supply and its fan must be enabled by command or by setting this variable to on. The value notSupported means that this device does not support redundant power ...

fanAndPsMainFanStatus

The status of the main Power Supply fan. notSupported means that this device does not support monitoring on the main power supply fan, or that there is no main power supply fan. The warning means the fan's speed is outside 30% of the expected speed.

fanAndPsRedundantFanStatus

The status of the redundant Power Supply Fan. notSupported means this device does not support redundant power supplies, ok means that the redundant power supply fan is running, notOk means that the redundant power supply fan is not running, and notMonitor ...

fanAndPsTemperatureStatus

The status of temperature in this device. ok means that the device is not capable of monitoring temperature or that the temperature is OK, notOk means that the temperature is being monitored and is currently out of the range 0C - 45C.

fanAndPsFanTrayPresent

The status of the presence of the fan tray in this system. Systems which do not support a fan tray return the value notSupported. Upon removal of the fan tray there is a short period (20s) before the value of this variable is changed to notPresent. This i ...

fanAndPsFanTrayStatus

The status of the fan tray in this system. Systems which do not support a fan tray return the value notSupported. The value ok is returned if all fans in the fan tray are running at full speed. The value notOk is returned if one of more of the fan tray fa ...

fanAndPsMainMonitoringStatus

The current status of main power supply monitoring. The monitoring of the main power supply and its fan is always enabled by those systems that support it. Systems which do not support main power supply or fan monitoring report a value of notSupported. Th ...

fanAndPsPsuStatusTable

The table of AT8948 fanAndPsPsuStatusTable. Each entry in the table represents the status of one of the power supplies in AT8948 system. Each power supply has its own board ID.

fanAndPsPsuStatusEntry

A single entry of AT8948 fanAndPsPsuStatusTable, indexed by fanAndPsPsuNumber field.

fanAndPsPsuNumber

The PSU board identity for which this entry holds. If the system consists only of a single PSU board, only one entry will appear in the table, whose index is 1.

fanAndPsPsuPresent

The PSU present state, displayed as 'yes' if present, or 'no' if absent.

fanAndPsPsuType

The PSU type, displayed as AC, or DC, or FAN, or NOT PRESENT.

fanAndPsPsuFan

The PSU fan status, displayed as OK, or FAIL, or NOT PRESENT.

fanAndPsPsuTemperature

The PSU temperature, displayed as GOOD, or HIGH, or NOT PRESENT, or NOT SUPPORTED.

fanAndPsPsuPower

The PSU power status, displayed as GOOD, or BAD, or NOT PRESENT or NOT SUPPORTED.

fanAndPsAccelFanStatus

The status of the accelerator card fans. Non-supported means this device does not support monitoring of the accelerator card fans.

restart

A router/switch restart request. A management station can remotely instruct an ATI router/switch to action a warm or cold restart. Once all the appropriate internal checks have been made, the router/switch will acknowledge the request via normal SNMP chan ...

restartCause

The reason for last time restart.

restartLog

The restart logging details.

cpuUtilisationMax

Maximum CPU utilisation since the router was last restarted. Expressed as a percentage.

cpuUtilisationAvg

Average CPU utilisation since the router was last restarted. Expressed as a percentage.

cpuUtilisationAvgLastMinute

Average CPU utilisation over the past minute. Expressed as a percentage.

cpuUtilisationAvgLast10Seconds

Average CPU utilisation over the past ten seconds. Expressed as a percentage.

cpuUtilisationAvgLastSecond

Average CPU utilisation over the past second. Expressed as a percentage.

cpuUtilisationMaxLast5Minutes

Maximum CPU utilisation over the last 5 minutes. Expressed as a percentage.

cpuUtilisationAvgLast5Minutes

Average CPU utilisation over the past 5 minutes. Expressed as a percentage.

generalTemperatureSupported

The value supported indicates general temperature is displayed by the device. The value notSupported indicates the device displays specific temperature information or none at all.

generalTemperatureActualTemp

The current temperature of product's base board, in degrees Celsius. A device which doesn't support this group will return the value 0 for this variable.

generalTemperatureStatus

The status of temperature in this device. ok indicates the temperature is below the threshold temperature or the device is not capable of monitoring temperature. notOk indicates the temperature is being monitored and is currently above the threshold tempe ...

generalTemperatureThreshold

The temperature threshold for the device. If the temperature of the device rises above this threshold generalTemeratureStatus will indicate a notOk status.

sbTempTable

The table of SwitchBlade sysTemperature. Each entry in the table represents temperature monitoring from one of the CPU cards which may be present in the SwitchBlade system.

sbTempEntry

A single entry of SwitchBlade sysTemperature

sbTempIndex

The board for which this temperature entry holds. If the system consists only of a single CPU board, only one entry will appear in the table, whose index is master(1).

sbTempActualTemperature

The actual SwitchBlade temperature. This temperature is measured within the SwitchBlade CPU, and is sampled at 1 second intervals.

sbTempFixedThresholdStatus

The temperature status with regard to the fixed temperature threshold. The value of the fixed temperature threshold is set at 90 degrees C. This variable represents whether the actual temperature is above the threshold (value is crossover(2)) or below the ...

sbTempSettableThresholdStatus

The temperature status with regard to the settable temperature threshold. The value of the settable temperature threshold is set by management intervention. This variable represents whether the actual temperature is above the threshold (value is crossover ...

sbTempSettableThreshold

The value of the settable temperature threshold. This can be set independently for each temperature entry. The value of this threshold is only valid when sbTempSettableThresholdStatus is not set to undefined(3).

sbTempFixedThreshold

The value of the fixed temperature threshold. This value is fixed for both CPU cards, and cannot be set.

atContactDetails

The contact details for Allied Telesis inc.

acceleratorTemperatureSupported

The value supported indicates whether accelerator card temperature is displayed by the device. The value notSupported indicates the device does not display specific accelerator card temperature information.

acceleratorTemperatureActualTemp

The current temperature of product's base board, in degrees Celsius. A device which doesn't support this group will return the value 0 for this variable.

acceleratorTemperatureStatus

The status of temperature in this device. ok indicates the temperature is below the threshold temperature or the device is not capable of monitoring temperature. notOk indicates the temperature is being monitored and is currently above the threshold tempe ...

acceleratorTemperatureThreshold

The temperature threshold for the device. If the temperature of the device rises above this threshold generalTemeratureStatus will indicate a notOk status.

freeMemory

Percentage of free memory still available on device

totalBuffers

Total number of buffers available on device

realTimeClockStatus

Shows the status of the real time clock

hostId

Host Identifier of this device