ATI-MIB Download

actualIPAddr

hub. This could be the same value as hubIPAddr, or it may be different if another IP Address was received via Bootp.

hubIPAddr

The configured IP Address of the hub.

subnetMask

Subnet mask of the hub.

routerAddr

Gateway/router address of the hub.

snmpManager

will be sent.

softwareProduct

The ATI software product model number running in the hub.

softwareLevel

The software release level running in the hub.

configurationChanged

hub's status or configuration has been changed. When this object is read, then the value is reset to nochange(2).

rptrNmMgrTable

A list of SNMP Trap Manager stations Entries. The number of entries is given by the rptrNmMgrTotal mib object. ::= { rptrInfo 9 } SYNTAX RptrNmMgrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION An Trap receipt Manager Entry containing ipaddres ...

localOmegaState

This object enables the Local Omega to be enabled or disabled. ::= { rptrInfo 11 } SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION This object enables the Remote Omega to be enabled or disabled. ::= { r ...

hubReadableOctets

of all ports on all modules/groups

hubFCSError

ports on all modules/groups

hubAlignError

ports on all modules/groups

hubFrameTooLong

ports on all modules/groups

hubShortEvent

ports on all modules/groups

hubRunt

ports on all modules/groups

hubLateEvent

ports on all modules/groups

hubVeryLongEvent

Counters of all ports on all modules/groups

hubDataRateMism

of all ports on all modules/groups

hubAutoPartition

of all ports on all modules/groups

hubTotalError

of all ports on all modules/groups

hubPortCollision

of all ports on all modules/groups

hubFrames-64-127bytes

TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 64 through 127 octets.

hubFrames-128-255bytes

TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 128 through 255 octets.

hubFrames-256-511bytes

TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 256 through 511 octets.

hubFrames-512-1023bytes

TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 512 through 1023 octets.

hubFrames-1024-1518bytes

TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 1024 through 1518 octets.

ledInfo

See groupLEDInfo

groupInfoTable

Table of group specific information.

groupInfoEntry

An entry in the table, containing information about a single group of ports.

groupInfoIndex

This object identifies the group within the repeater for which this entry contains information.

groupLEDInfo

This information encodes the current state of the module per-port LEDs.

groupSegmentation

AT-3100 product family only. This object controls the segmentation option for this group. It may be segmented, connected, or using the module's external segmentation switch.

groupSecurity

AT-3100 product family only. This object controls the Security option for this group. It may be enabled, disabled, or using module's external security switch.

groupIntruderProtection

AT-3100 and TurboStack product families only. This object controls the Intruder Protection option for this group/module. For TurboStack products, disabled turns off Intruder Protection and places the module into source address Learning Mode. Enabled tur ...

groupSrcAddrLearningMode

AT-3100 product family only. This object indicates the Source Address Learning Mode. Mode1 : Automatic; passive devices: Automatic MAC address learning. Re-learn port MAC address after a port is disabled/re-enabled. Passive devices connected to a port ...

groupIntruderTrap

AT-3100 and TurboStack product families only. This object controls the action to be taken by this group/module when an Intruder Alert event occurs. When this option is enabled, the detection of an intruder (a received packet with an unlearned or undefine ...

groupIntruderDisable

AT-3100 and TurboStack product families only. This object controls the action to be taken by this group/module when an Intruder Alert event occurs. When this option is enabled, the detection of an intruder (a received packet with an unlearned or undefine ...

groupOperStatus

TurboStack product family only. An object that indicates the operational status of the module. For modules that are repeaters, this value is identical to the rptrGroupOperStatus object. A status of operational(2) indicates that the module is present and f ...

groupDescr

TurboStack product family only. A textual description of the module. For modules that are repeaters, this value is identical to the rptrGroupDescr object.

groupObjectID

TurboStack product family only. The sysObject identification of the module. For modules that are repeaters, this value is identical to the rptrGroupObjectID object.

groupIPAddress

TurboStack product family only. The IP address (if any) of the module. For modules that are repeaters, this value is identical to the actualIPAddr object. For non-repeater modules, this object identifies the IP address that may be used to communicate dir ...

groupPortCapacity

TurboStack product family only. The number of ports contained within the module. Valid range range is 1-1024. Within each module, the ports are uniquely numbered in the range from 1 to groupPortCapacity. For modules that are repeaters, this value is ide ...

groupEraseSourceAddressTable

TurboStack product family only. This object, when Set to the erase value, will clear (empty) the module Source Address Table, deleting all learned MAC addresses; this object will then automatically revert back to the noerase state. When Set to noerase, ...

groupAddSourceAddress

TurboStack product family only. This object, when Set with a 48-bit MAC address value, will add the new MAC address to the module Source Address Table. A Get of this object will return a string of length zero.

groupDeleteSourceAddress

TurboStack product family only. This object, when Set with a 48-bit MAC address value, will delete the MAC address from the module Source Address Table. A Get of this object will return a string of length zero.

groupLimitAddressPerPort

TurboStack product family only. This object configures the module to allow no limitation on number of source addresses on its ports, or limit to only 1 source address per port.

groupCheckPrimaryTimer

TurboStack product family only. The Check Primary Timer is the timer value in seconds which determines how long to wait before checking if the primary port could receive again. This timer applies when the secondary port is enabled, and the primary port's ...

groupStatEntry

An entry in the table, containing total performance and error statistics for a single group. Regular retrieval of the information in this table provides a means of tracking the performance and health of the networked devices attached to this group's port ...

groupStatIndex

This object identifies the group within the repeater for which this entry contains information.

groupFCSError

ports on this module/group

groupAlignError

ports on this module/group

groupFrameTooLong

ports on this module/group

groupShortEvent

ports on this module/group

groupRunt

ports on this module/group

groupPortCollision

of all ports on this module/group

groupLateEvent

ports on this module/group

groupVeryLongEvent

Counters of all ports on this module/group

groupDataRateMism

of all ports on this module/group

groupAutoPartition

of all ports on this module/group

groupFrames-64-127bytes

TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 64 through 127 octets.

groupFrames-128-255bytes

TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 128 through 255 octets.

groupFrames-256-511bytes

TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 256 through 511 octets.

groupFrames-512-1023bytes

TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 512 through 1023 octets.

groupFrames-1024-1518bytes

TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 1024 through 1518 octets.

groupSourceAddressTable

TurboStack product family only. Table of learned and/or configured source MAC addresses which defines the only valid and allowable source addresses for this module (if Intruder Protection is enabled).

groupSATEntry

TurboStack product family only. An entry in the Source Address Table, containing information about a single source MAC address.

groupSATModule

TurboStack product family only. This object identifies the group within the repeater for which this entry contains information.

groupSATIndex

TurboStack product family only. This object identifies the index within the Source Address Table for which this entry contains information.

groupSATMacAddress

TurboStack product family only. This object is the learned or configured source MAC address. If no MAC address has been learned for this table entry (if this is beyond the logical end of the table) then a string of zero length will be returned.

groupSATPort

TurboStack product family only. This object is the port number where the source MAC address was last detected. If the MAC address has not been detected since the system was last started, then this object will be zero.

atiPortTable

Table of descriptive and status information about the ports.

atiPortEntry

An entry in the table, containing information about a single port.

atiPortGroupIndex

This object identifies the group containing the port for which this entry contains information.

atiPortIndex

This object identifies the port within the group for which this entry contains information. This value can never be greater than rptrGroupPortCapacity for the associated group.

portName

Port Name

portState

Port State option: enabled allow repeating of packets through the port; disabled turns off the port and prevents packets repeating through the port.

linkTest

Link Test option: enabled turns on checking for link test signals for the port; disabled turns off checking for link test signals.

altReconnection

Reconnection Method: 1=IEEE Standard, 2=Alternate.

polarityCorrection

Polarity Correction option: enabled turns on automatic polarity correction for the port; disabled turns off automatic polarity correction.

partitionedLED

This object reflects the current actual partitioning state of the port. The notpartitioned value means that the port is operational and repeating through the port is enabled. The partitioned value means that the port is not operational and repeating thro ...

linkTestLED

This object reflects the current actual link test state of the port. The nolinktesterror value means that valid link integrity test signals have been detected on the port, indicating that an operable device is cabled to the port. The linktesterror value ...

polarityLED

This object reflects the current actual polarity state of the port. The notreversed value means that the port-to-device cable connection is properly polarized. The reversed value means that the cable connection has reversed polarity. This object applies ...

portMACAddress

AT-3100 product family only. This object is either the MAC address of the last readable frame (i.e., counted by rptrMonitorPortReadableFrames) received by this port, or a manually input MAC address. If neither of those exists, then a string of length zero ...

portFrames-64-127bytes

TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 64 through 127 octets.

portFrames-128-255bytes

TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 128 through 255 octets.

portFrames-256-511bytes

TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 256 through 511 octets.

portFrames-512-1023bytes

TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 512 through 1023 octets.

portFrames-1024-1518bytes

TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 1024 through 1518 octets.

portRedundantPort

TurboStack product family only. This is the redundant port for atiPortIndex. If the port is a secondary port as indicated in portRedundantPosition, then it serves as a backup port. This would indicate paired ports with redundant link.

portRedundantPosition

TurboStack product family only. This object will retrieve the redundant position of the port, primary or secondary port, if the port has a redundant link to it.

portLearningState

TurboStack product family only. This object enable the learning on a port to be shut ON or OFF. Once the learning is Shut Off, the learning of MAC Address will stop. ::= { atiPortEntry 19 } -- ATI Enterprise Trap -- -- These are the object I am adding wh ...

atiTrapIntruderModuleNumber

This is the module number on which an intruder was seen.

atiTrapIntruderPortNumber

This is the port number on which an intruder was seen.

atiPortChangeDirection

This is the direction of redundant port change. These two values are used in the trap atiRedundantPortChangeTrap. ::= { atiTrapAttrs 4 } intruderProtectionTrap TRAP-TYPE ENTERPRISE repeater VARIABLES { rptrAddrTrackNewLastSrcAddress } DESCRIPTION This ...