MIBs list
OID list for BRIDGE-MIB
- dot1dBaseBridgeAddress
- The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenate ...
- dot1dBaseNumPorts
- The number of ports controlled by this bridging entity.
- dot1dBaseType
- Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.
- dot1dBasePortTable
- A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included.
- dot1dBasePortEntry
- A list of information for each port of the bridge.
- dot1dBasePort
- The port number of the port for which this entry contains bridge management information.
- dot1dBasePortIfIndex
- The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port.
- dot1dBasePortCircuit
- For a port which (potentially) has the same value of dot1dBasePortIfIndex as another port on the same bridge, this object contains the name of an object instance unique to this port. For example, in the case where multiple ports correspond one- to-one wi ...
- dot1dBasePortDelayExceededDiscards
- The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.
- dot1dBasePortMtuExceededDiscards
- The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges.
- dot1dStpProtocolSpecification
- An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tr ...
- dot1dStpPriority
- The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.
- dot1dStpTimeSinceTopologyChange
- The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
- dot1dStpTopChanges
- The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
- dot1dStpDesignatedRoot
- The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
- dot1dStpRootCost
- The cost of the path to the root as seen from this bridge.
- dot1dStpRootPort
- The port number of the port which offers the lowest cost path from this bridge to the root bridge.
- dot1dStpMaxAge
- The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
- dot1dStpHelloTime
- The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently u ...
- dot1dStpHoldTime
- This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
- dot1dStpForwardDelay
- This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which p ...
- dot1dStpBridgeMaxAge
- The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1 ...
- dot1dStpBridgeHelloTime
- The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole nu ...
- dot1dStpBridgeForwardDelay
- The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802. ...
- dot1dStpPortTable
- A table that contains port-specific information for the Spanning Tree Protocol.
- dot1dStpPortEntry
- A list of information maintained by every port about the Spanning Tree Protocol state for that port.
- dot1dStpPort
- The port number of the port for which this entry contains Spanning Tree Protocol management information.
- dot1dStpPortPriority
- The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort.
- dot1dStpPortState
- The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) s ...
- dot1dStpPortEnable
- The enabled/disabled status of the port.
- dot1dStpPortPathCost
- The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
- dot1dStpPortDesignatedRoot
- The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
- dot1dStpPortDesignatedCost
- The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
- dot1dStpPortDesignatedBridge
- The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
- dot1dStpPortDesignatedPort
- The Port Identifier of the port on the Designated Bridge for this port's segment.
- dot1dStpPortForwardTransitions
- The number of times this port has transitioned from the Learning state to the Forwarding state.
- dot1dTpLearnedEntryDiscards
- The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database ...
- dot1dTpAgingTime
- The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds.
- dot1dTpFdbTable
- A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
- dot1dTpFdbEntry
- Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
- dot1dTpFdbAddress
- A unicast MAC address for which the bridge has forwarding and/or filtering information.
- dot1dTpFdbPort
- Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that ...
- dot1dTpFdbStatus
- The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used ...
- dot1dTpPortTable
- A table that contains information about every port that is associated with this transparent bridge.
- dot1dTpPortEntry
- A list of information for each port of a transparent bridge.
- dot1dTpPort
- The port number of the port for which this entry contains Transparent bridging management information.
- dot1dTpPortMaxInfo
- The maximum size of the INFO (non-MAC) field that this port will receive or transmit.
- dot1dTpPortInFrames
- The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging fun ...
- dot1dTpPortOutFrames
- The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridgin ...
- dot1dTpPortInDiscards
- Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process.
- dot1dStaticTable
- A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. The v ...
- dot1dStaticEntry
- Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded.
- dot1dStaticAddress
- The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address or the broadcast address.
- dot1dStaticReceivePort
- Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other app ...
- dot1dStaticAllowedToGoTo
- The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 throug ...
- dot1dStaticStatus
- This object indicates the status of this entry. The default value is permanent(3). other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value ...
MIBs list
