CISCO-FCSP-MIB

CISCO-FCSP-MIB Download

MIBs list

MIB module for managing Fibre Channel Security for the fibre channel devices. This MIB is used to configure and monitor the Fibre-Channel Security Protocol (FC-SP)

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-FCSP-MIB

cfcspIfTable
This table provides the FCSP configuration for the fibre channel interfaces. Note that the ifType for the fibre channel interfaces is fibreChannel(56).
cfcspIfEntry
An entry (conceptual row) in the cfcspIfTable, containing FCSP configuration for the interface identified by ifIndex. Each entry contains a FCSP mode of the interface, reauthentication interval and authentication command object. INDEX { ifIndex } ::= { cf ...
cfcspReauthInterval
The time for which a port has to wait before trying to re-authenticate the other end. 0 means re-authentication is not done. This object is not relevant if cfcspMode is 'off'.
cfcspReauthenticate
If this object is set to 'enable', reauthentication is started. No action is taken if set to 'noOp'. When read, always 'noOp' is returned.
cfcspAuthProtocols
The FC-SP authentication protocols used by this device. Only 1 bit can be set to 1 at any time. The bit that is set to 1, its corresponding protocol will be used first and other protocol will be used as second preference.
cfcspTimeout
Timeout period for FC-SP messages
cfcspDhChapHashList
Each octet in this object contains a IANA assigned identifier of a proposed hash mechanism, in the order of preference. The first octet is the most preferred and the last octet contains the least preferred.
cfcspDhChapGroupList
Each octet in this object contains a group number, corresponding to a Diffie-Hellman group identifier, in order of preference. Currently there are 5 groups supported, from value 0 through 4. Each number corresponds to the Diffie-Hellman group as follows ...
cfcspDhChapGenericPasswd
DHCHAP Password for this device
cfcspLocalPasswdTable
This table provides the FCSP DHCHAP password configuration for the device.
cfcspLocalPasswdEntry
An entry (conceptual row) in the cfcspLocalPasswdTable. Each entry, indexed by the device's World-wide name, consists of a local password and a rowStatus object.
cfcspSwitchWwn
The World-Wide Name of the host with which this password has to be used.
cfcspLocalPasswd
DHCHAP Password of the local device.
cfcspLocalPassRowStatus
The status of this conceptual row.
cfcspRemotePasswdTable
This table provides the FCSP DHCHAP password configuration for other devices
cfcspRemotePasswdEntry
An entry (conceptual row) in the cfcspRemotePasswdTable. Each entry, indexed by the remote device's World-wide name, consists of a DHCHAP password and a rowStatus object.
cfcspRemoteSwitchWwn
The World-Wide Name of other device.
cfcspRemotePasswd
Password of the other device.
cfcspRemotePassRowStatus
The status of this conceptual row.
cfcspIfStatsTable
This table provides the FCSP statistics for all the fibre channel interfaces.
cfcspIfStatsEntry
An entry (conceptual row) in the cfcspIfStatsTable.
cfcspIfAuthSucceeded
The number of times the FCSP authentication succeeded on this interface.
cfcspIfAuthFailed
The number of times the FCSP authentication failed on this interface.
cfcspIfAuthByPassed
The number of times the FCSP authentication was bypassed on this interface.
cfcspConfigGroup
A collection of objects for configuring Fibre Channel security Information.
cfcspLocalPasswdGroup
A collection of objects for configuring Fibre Channel security Information.
cfcspIfStatsGroup
A collection of objects for monitoring FCSP statistics.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list