CISCO-FILTER-GROUP-MIB Download
The MIB module is for creating and configuring
object groups to support packet filtering and
access control on IP and other protocols.
The cfgFilterGroupTable allows users to create
delete, and get information about filter groups.
Filter groups are uniquely identified by the
group names. Filter groups can either be of
network, protocol, service and icmp and filter
group type cannot be changed once it has been created.
The cfgFilterNetworkGroupTable is used for managing
information about IP Addresses.
The cfgFilterIpProtocolGroupTable is used for managing
information about protocols.
The cfgFilterIpServiceGroupTable is used for managing
information about services(ports).
The cfgFilterICMPGroupTable is used for managing
information about ICMP protocol.
The cfgFilterNestedGroupTable is used for supporting
nesting of filter groups(i.e configuring filter groups
inside the other filter groups).
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-FILTER-GROUP-MIB
- cfgFilterGroupTable
- This table is used for creating/deleting filter groups. A filter group allows grouping of filter objects of same type. Filter group is identified by a name and this group can be used in other tables to simplify filter creation. Filter objects are Intern ...
- cfgFilterGroupEntry
- An entry in filter group table. Each entry contains information such as filter group type, filter description.
- cfgFilterGroupName
- This object identifies unique name for the filter group.
- cfgFilterGroupType
- This object identifies the type of the filter group. The possible values are: network (1) : specifies network group. This group contains information on the IP address and address mask. This information is available in cfgFilterNetworkGroupTable. ipProtoc ...
- cfgFilterGroupDescription
- This object is used for configuring description for the filter group.
- cfgFilterGroupStorageType
- The storage type for this conceptual row.
- cfgFilterGroupRowStatus
- This object is used for adding/deleting entries in this table. This object can be set to 'active' only if cfgFilterGroupType is configured for the row.
- cfgFilterNetworkGroupTable
- This table is used for adding/deleting network filter group. A network filter group is used to specify host IP addresses or subnet ranges. This is applicable only for the cfgFilterGroupType value of 'network'.
- cfgFilterNetworkGroupEntry
- An entry in network filter group table. Each entry contains information on the IP address and the mask value that can be used in filtering the packet. Multiple entries with the same value of cfgFilterGroupName belong to the same network filter group.
- cfgFilterNetworkGroupIndex
- This object identifies an unique entry for a network filter group.
- cfgFilterNetworkAddressType
- This is the internet address type of for the cfgFilterNetworkAddress and cfgFilterNetworkMask. The value of this object cannot be changed when cfgFilterGroupRowStatus is 'active'.
- cfgFilterNetworkAddress
- The source/destination internet address to be configured. A value of zero causes all source/destination address to match in an IP filter where this group is used. The object value has to be consistent with the type specified in cfgFilterNetworkAddressTyp ...
- cfgFilterNetworkMask
- This is the wild card mask for the cfgFilterNetworkAddress bits that must match. Presence of 0 bits in the mask indicate that corresponding bits in the cfgFilterNetworkAddress must match in order for the matching to be successful, and 1 bits are don't car ...
- cfgFilterNetworkStorageType
- The storage type for this conceptual row.
- cfgFilterNetworkRowStatus
- This object is used for adding/deleting entries in this table. This object can be set to 'active' only with valid value for cfgFilterNetworkAddressType object.
- cfgFilterIpProtocolGroupTable
- This table is used for adding/deleting protocol filter group. A protocol filter group is used to specify protocol(s). This is applicable only for the cfgFilterGroupType value of 'ipProtocol'.
- cfgFilterIpProtocolGroupEntry
- Each entry is an IP Protocol traffic filter within an IP filter profile. Entries with the same cfgFilterGroupName belong to the same protocol filter group.
- cfgFilterIpProtocolGroupIndex
- This index uniquely identifies the entries in this table.
- cfgFilterIpProtocolNumber
- This object identifies the internet protocol number in the packets. These IP protocol numbers are defined in the Network Group Request For Comments(RFC) documents. For example, Cisco commonly used protocol includes: 1 - Internet Control Message Protocol ...
- cfgFilterIpProtocolStorageType
- The storage type for this conceptual row.
- cfgFilterIpProtocolGroupRowStatus
- This object is used for adding/deleting entries in this table. This object can be set to 'active' only with valid value for cfgFilterIpProtocolNumber object.
- cfgFilterIpServiceGroupTable
- This table is used for adding/deleting service filter group. A service filter group is used to specify specific or ranges of TCP/UDP ports to be defined. This filter group can be used as either the source port(s) or destination port(s) in the associated ...
- cfgFilterIpServiceGroupEntry
- Each entry is an IP Protocol traffic filter within an IP filter profile. Entries with the same cfgFilterGroupName belong to the same protocol filter group.
- cfgFilterIpServiceGroupIndex
- This index uniquely identifies the entries in this table.
- cfgFilterIpServiceType
- This object identifies the protocol type of the port for this group. The possible value(s) are : tcp(1) : TCP port. udp(2) : UDP port. tcpUdp(3) : TCP/UDP port. This value is applicable for a port which is same for both TCP and UDP.
- cfgFilterIpServicePortLow
- This object identifies the source or destination port number. This is the inclusive lower bound of the transport-layer source/destination port range that is to be matched in the filter where this group is defined. This value must be equal to or less tha ...
- cfgFilterIpServicePortHigh
- This object identifies the source or destination port number. This is the inclusive upper bound of the transport-layer source/destination port range that is to be matched in the filter where this group is defined. This value must be equal to or greater ...
- cfgFilterIpServiceStorageType
- The storage type for this conceptual row.
- cfgFilterIpServiceGroupRowStatus
- This object is used for adding/deleting entries in this table. This object can be set to 'active' only with valid value for cfgFilterIpServiceType object.
- cfgFilterICMPGroupTable
- This table contains lists of filters for ICMP Type filter group. An ICMP Type filter group can be configured with multiple entries each representing the ICMP message types and ICMP message code. This is applicable only for the cfgFilterGroupType value o ...
- cfgFilterICMPGroupEntry
- An entry in ICMP filter group table. Each entry contains information on the ICMP message type and ICMP code. Multiple Entries with the same value of cfgFilterGroupName belong to the same ICMP filter group.
- cfgFilterICMPGroupIndex
- This index identifies an unique entry in this table.
- cfgFilterICMPType
- This object specifies the ICMP message type to be configured in ICMP filter group. Setting this object to '-1' will make the filtering match any ICMP message type. Some of the commonly used ICMP Message types are: 0 - Echo Reply 3 - Destination Unreachab ...
- cfgFilterICMPCode
- This object specifies the ICMP message code to be configured in ICMP filter group. Setting this object to '-1' will make the filtering match any ICMP code.
- cfgFilterICMPStorageType
- The storage type for this conceptual row.
- cfgFilterICMPGroupRowStatus
- This object is used for adding/deleting entries in this table. This object can be set to 'active' only with valid value for cfgFilterICMPType object.
- cfgFilterNestedGroupTable
- This table contains lists of filter groups that are configured in other filter group. This table is used for configuring a group as member of another group.
- cfgFilterNestedGroupEntry
- An entry in nested filter group table. Each entry contains information on the a group that is configured in another group.
- cfgFilterParentGroupName
- This object identifies the filter group that is previously created and to which another filter group identified by cfgFilterNestedGroupName will be added. The value for this object must correspond to entry in cfgFilterGroupTable.
- cfgFilterNestedGroupName
- This object identifies the filter group that is previously created and is being added to another filter group identified by cfgFilterParentGroupName. The value for this object must correspond to entry in cfgFilterGroupTable. The value for this object sho ...
- cfgFilterNestedStorageType
- The storage type for this conceptual row.
- cfgFilterNestedGroupRowStatus
- This object is used for adding/deleting entries in this table.
- ciscoFilterObjectGroup
- Configuration parameters for filter groups.
- ciscoFilterNetworkGroup
- Configuration parameters for network filters.
- ciscoFilterIpProtocolGroup
- Configuration parameters for protocol filters.
- ciscoFilterIpServiceGroup
- Configuration parameters for port filters.
- ciscoFilterICMPGroup
- Configuration parameters related to ICMP filter group.
- ciscoFilterNestedGroup
- Configuration parameters related to nesting of filter group.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
