CISCO-GGSN-MIB Download

cGgsnSentSigMessages

The number of GTP signalling messages sent. Trigger Condition: This counter is updated whenever a GTP signalling messages is sent out, including retries.

cGgsnReceivedSigMessages

The number of GTP signalling messages received. Trigger Condition: This counter is updated whenever a GTP signalling message is received.

cGgsnUnexpectedSigMessages

The number of unexpected GTP signalling messages received. Trigger Condition: This counter is updated whenever an unexpected Signalling message is received. Condition includes, a) A Response message for which there is no corresponding outstanding Request. ...

cGgsnSentGPDUs

The number of G-PDU messages sent. Trigger Condition: This counter is updated whenever a G-PDU is sent out by the GGSN.

cGgsnReceivedGPDUs

The number of G-PDU messages received. Trigger Condition: This counter is incremented for each G-PDU received.

cGgsnSentGPDUOctets

The number of total bytes sent in G-PDU messages. Trigger Condition: This counter is updated whenever a G-PDU is sent out by the GGSN.

cGgsnReceivedGPDUOctets

The number of total bytes received in G-PDU messages. Trigger Condition: This counter is incremented for each G-PDU received.

cGgsnUnexpectedGPDUs

The number of unexpected G-PDU messages, for example, non existent PDP contexts and ACL denial. Trigger Condition: This counter is updated whenever an unexpected G-PDU message is received. Conditions include, a) G-PDU for a non existent PDP. b) ACL denial ...

cGgsnActivationRejectedPdps

The number of PDP contexts that the activation request was rejected. Trigger Condition: This counter is updated when a PDP activation request is rejected. The cause for rejection can be a) Resource limitations like max PDP limit is reached, Out of memory. ...

cGgsnOutOfResourcePdps

The number of PDP contexts that the activation request rejected due to the GGSN running out of resources for transmitting GTP packets. Examples: - Out of memory; - The number of PDPs on GGSN reached limit; - all dynamic PDP address are occupied; Trigger C ...

cGgsnParserErrorMessages

The number of GTP messages received with wrong value. It includes the following cases: - mandatory and optional information element in the GTP packet is duplicated, missing, unknown, incorrect or out of order. - the GTP message is too short to hold the GT ...

cGgsnTotalCreatedPdps

This object represents the total number of PDP contexts created. Trigger Condition: This counter is updated whenever a PDP context is created. This includes static, dynamic, IP, PPP, network init PDPs.

cGgsnTotalDeletedPdps

This object represents the total number of PDP contexts deleted. Trigger Condition: This counter is updated whenever a PDP context is deleted. This includes static, dynamic, IP, PPP, network init PDPs.

cGgsnTotalNetworkInitPdps

This object represents the total number of PDP contexts activated by the GGSN that were initiated by the PDN. Trigger Condition: This counter will be updated on successful creation of network initiated PDP.

cGgsnTotalPppPdpsCreated

This object represents the total number of PPP PDP contexts created. Trigger Condition: This counter is updated whenever a PPP PDP context is created.

cGgsnTotalPppPdpsDeleted

This object represents the total number of PPP PDP contexts deleted. Trigger Condition: This counter is updated whenever a PPP PDP context is deleted.

cGgsnOutOfResourcePppRegenPdps

This object represents the total number of create PDP context and delete PDP context requests rejected due to unavailable resource on the GGSN for PPP regeneration. Trigger Condition: a) Out of memory. b) Number of PPP-regen PDPs reaches max limit. c) All ...

cGgsnDroppedPppRegenPdps

This object represents the total number of create PDP context and delete PDP context requests that were dropped due to the threshold limit being reached for maximum number of PPP regeneration sessions allowed on the GGSN. Trigger Condition: This counter i ...

cGgsnTftSemanticErrorPdps

This object represents the total number of received PDP context messages that had TFTs with semantic errors. Trigger Condition: This counter is triggered by the create, update PDP context request message.

cGgsnTftSyntacticErrorPdps

This object represents the total number of received PDP context messages that had TFTs with syntactic errors. Trigger Condition: This counter is triggered by the create, update PDP context request message.

cGgsnPktFilterSemanticErrorPdps

This object represents the total number of received PDP context messages that had packet filters with semantic errors. Trigger Condition: This counter is triggered by the create, update PDP context request message.

cGgsnPktFilterSyntacticErrorPdps

This object represents the total number of received PDP context messages that had packet filters with syntactic errors. Trigger Condition: This counter is triggered by the create, update PDP context request message.

cGgsnHCSentGPDUOctets

The number of total bytes sent in G-PDU messages. Trigger Condition: This counter is updated whenever a G-PDU is sent out by the GGSN.

cGgsnHCReceivedGPDUOctets

The number of total bytes received in G-PDU messages. Trigger Condition: This counter is incremented for each G-PDU received.

cGgsnVersionNotSupportedRejPdps

The number of PDP contexts that were rejected due to the cause of Version Not Supported. Trigger Condition: This counter is triggered by create/update PDP / PPP PDP context request message. This object is deprecated by cGgsnVersionNotSupportedMsgs.

cGgsnUnkownMessageRejPdps

The number of PDP contexts that were rejected due to the cause of Unknown Message. Trigger Condition: This counter is triggered by create/update PDP / PPP PDP context request message. This object is deprecated by cGgsnUnkownGtpMsgs.

cGgsnMsgTooShortRejPdps

The number of PDP contexts that were rejected due to the cause of Message Too Short. Trigger Condition: This counter is triggered by create/update PDP / PPP PDP context request message. This object is deprecated by cGgsnTooShortMsgs.

cGgsnMandIeMissingRejPdps

The number of PDP contexts that were rejected due to the cause of Mandatory IE Missing. Trigger Condition: This counter is triggered by create/update PDP / PPP PDP context request message. This object is deprecated by cGgsnMandIeMissingMsgs.

cGgsnMandIeIncorrectRejPdps

The number of PDP contexts that were rejected due to the cause of Mandatory IE Incorrect. Trigger Condition: This counter is triggered by create/update PDP / PPP PDP context request message. This object is deprecated by cGgsnMandIeIncorrectMsgs.

cGgsnOptIeInvalidRejPdps

The number of PDP contexts that rejected due to the cause of Optional IE Invalid. Trigger Condition: This counter is triggered by create/update PDP / PPP PDP context request message. This object is deprecated by cGgsnOptIeInvalidMsgs.

cGgsnIeUnknownRejPdps

The number of PDP contexts that rejected due to the cause of IE Unknown. Trigger Condition: This counter is triggered by create/update PDP / PPP PDP context request message. This object is deprecated by cGgsnIeUnknownMsgs.

cGgsnIeOutOfOrderRejPdps

The number of PDP contexts that rejected due to the cause of IE Out of Order. Trigger Condition: This counter is triggered by create/update PDP / PPP PDP context request message. This object is deprecated by cGgsnIeOutOfOrderMsgs.

cGgsnIeUnexpectedRejPdps

The number of PDP contexts that rejected due to the cause of IE Unexpected. Trigger Condition: This counter is triggered by create/update PDP / PPP PDP context request message. This object is deprecated by cGgsnIeUnexpectedMsgs.

cGgsnIeDuplicatedRejPdps

The number of PDP contexts that rejected due to the cause of IE Duplicated. Trigger Condition: This counter is triggered by create/update PDP / PPP PDP context request message. This object is deprecated by cGgsnIeDuplicatedMsgs.

cGgsnOptIeIncorrectRejPdps

The number of PDP contexts that rejected due to the cause of Optional IE Incorrect. Trigger Condition: This counter is triggered by create/update PDP / PPP PDP context request message. This object is deprecated by cGgsnOptIeIncorrectMsgs.

cGgsnPdpWithoutTftExistsRejPdps

The number of PDP contexts that are rejected due to the cause of PDP context without TFT already exists. Trigger Condition: This counter is triggered by create/update PDP / PPP PDP context request message. This object is deprecated by cGgsnPdpWithoutTftEx ...

cGgsnSgsnStatTable

This table has the statistics of the interface (Gi, Gn, Gp) upstream and downstream traffic per SGSN for a configurable duration set in cGgsnThruputIntervalOne and cGgsnThruputIntervalTwo. Creation of row(s) will happen when there is a valid value set to ...

cGgsnSgsnStatEntry

An entry in this table.

cGgsnSgsnThruPutInterval

This object should be one of the values set in the objects cGgsnThruputIntervalOne or cGgsnThruputIntervalTwo except for value '0', which means the throughput collection is disabled.

cGgsnSgsnThruPutLastCollected

This object represents the delta value between the time when this data is collected and the time it is been retrieved.

cGgsnSgsnUpStreamPktCnt

This object represents the total number of upstream packets sent on this SGSN data path. Data flow from MS to PDN is considered to be upstream traffic. When the throughput intervals (cGgsnThruputIntervalOne or cGgsnThruputIntervalTwo) is set to some valid ...

cGgsnSgsnUpStreamByteCnt

This object represents the total number of upstream bytes sent on this SGSN data path. Data flow from MS to PDN is considered to be upstream traffic. When the throughput intervals (cGgsnThruputIntervalOne or cGgsnThruputIntervalTwo) is set to some valid v ...

cGgsnSgsnDownStreamPktCnt

This object represents the total number of downstream packets sent on this SGSN data path. Data flow from PDN to MS is considered to be downstream traffic. When the throughput interval (cGgsnThruputIntervalOne or cGgsnThruputIntervalTwo) is set to some va ...

cGgsnSgsnDownStreamByteCnt

This object represents the total number of downstream bytes sent on this SGSN data path. Data flow from PDN to MS is considered to be downstream traffic. When the throughput interval (cGgsnThruputIntervalOne or cGgsnThruputIntervalTwo) is set to some vali ...

cGgsnTotalMessages

This counter will maintain the count of total number of messages of all kind. Trigger Condition: The counter is increamented whenever a redundancy message is sent.

cGgsnContextSetupMessages

The PDP context is check pointed to standby only after it goes to active. This object is a counter, which maintains the total count of PDP context setup messages. Trigger Condition: This counter is updated whenever a PDP context setup message is check poi ...

cGgsnContextModifyMessages

For modify or update PDP context, the categories get affected and new quota is assigned to them. This new info must be check pointed to the standby. This object maintains the total number of context modify messages which are check pointed to standby. Trig ...

cGgsnContextRemoveMessages

When the PDP context is deleted, deletion event is check pointed to the standby, so that the corresponding backup context deleted as well. This object will maintain the total number of context removed messages which are check pointed to standby. Trigger C ...

cGgsnPathSetupMessages

Messages (of any kind PDP create/delete etc)indicate the presence of other GSN. Path is setup between the GSNs when they transmit the messages. This object contains the number of path setup messages between SGSN and GGSN. Trigger Condition: This counter i ...

cGgsnPathModifyMessages

This object will contain the total number of path Modify messages. The IE recovery count is used to indicate restart of other GSN. Any change related to path or GSN will be check pointed to standby. Trigger Condition: This counter is incremented for every ...

cGgsnPathRemoveMessages

This object will keep track of all the messages which are responsible for path removal between the GSNs. As long as context remain established, the path between the GSNs is alive. In an instant where the last context is released and the echo timer is not ...

cGgsnCGFReadyMessages

The charging information are sent from GGSN to charging gateway. GTP' protocol is used between them. This object will consists of total number of CGF ready messages. Trigger Condition: The counter is incremented when CGF ready message is check pointed to ...

cGgsnCGFModifyMessages

Significant information related to change in state of CGF must be check pointed to GGSN. This object indicates the total number of CGF modify messages recieved. Trigger condition: This counter is triggered when there is a change in CGF state.

cGgsnCGFRemoveMessages

This object maintains the count for all the messages responsible for CGF removal Trigger Condition: This counter is triggered when context is deleted.

cGgsnInternalStateMsgs

The GGSN certain information which are sent out to other GSN's (SGSN) and CGF. On failover these information must be consistent. Information like, IE recovery count sent to the other GSN's for path management, local record sequence number and charging ID ...

cGgsnSlbCacFailures

This object will keep track of number of CAC Failure notifications sent to SLB. Trigger Condition: The counter is incremented whenever GGSN sends CAC failure notification to SLB.

cGgsnSlbSessionFailures

This object will keep track of number of Session failure notifications sent to SLB. Trigger Condition: The counter is incremented whenever GGSN sends Session failure notification to SLB.

cGgsnTotalCreatedIpv6Pdps

This object represents the total number of successfully created ipv6 PDP contexts. Trigger Condition: The counter is incremented whenever a ipv6 PDP context is created. This includes static, dynamic, IP PDPs.

cGgsnTotalDeletedIpv6Pdps

This object represents the total number of ipv6 PDP contexts deleted. Trigger Condition: The counter is incremented whenever a ipv6 PDP context is deleted. This includes static, dynamic, IP, PPP PDPs.

cGgsnTotalRejectedIpv6Pdps

This object represents the total number of rejected ipv6 PDP context activation requests. Trigger Condition: The counter is incremented when a ipv6 PDP activation request is rejected.

cGgsnSentIpv6SigMessages

The total number of GTP signalling messages related to the IPv6 PDP sent by GGSN. Trigger Condition: The counter is incremented whenever a GTP signalling message for IPv6 PDP is sent out, including retries.

cGgsnReceivedIpv6SigMessages

The total number of GTP signalling messages related to the IPv6 PDP received by GGSN. Trigger Condition: The counter is incremented whenever a GTP signalling message for IPv6 PDP is received.

cGgsnSentIpv6PDUs

The number of ipv6 data packets sent by GGSN. Trigger Condition: The counter is incremented whenever a G-PDU is sent out by the GGSN.

cGgsnReceivedIpv6PDUs

The number of ipv6 data packets receivd by GGSN. Trigger Condition: This counter is incremented for each G-PDU received.

cGgsnSentIpv6PDUOctets

The number of ipv6 data bytes sent, in PDU messages, by GGSN. Trigger Condition: The counter is incremented whenever a G-PDU is sent out by the GGSN.

cGgsnReceivedIpv6PDUOctets

The number of ipv6 data bytes received, in PDU messages, by GGSN. Trigger Condition: The counter is incremented for each G-PDU received.

cGgsnVersionNotSupportedMsgs

The number of GTP messages received from devices running an unsupported version of the GTP.

cGgsnUnkownGtpMsgs

The number of unknown GTP messages received.

cGgsnTooShortMsgs

The number of GTP messages received that are too short to hold the GTP header for the supported GTP version.

cGgsnMandIeMissingMsgs

The number of GTP messages received with a missing mandatory information element.

cGgsnMandIeIncorrectMsgs

The number of GTP messages received with an incorrect mandatory information element, for example, with an information element that has an incorrect length.

cGgsnOptIeInvalidMsgs

The number of GTP messages received with an information element that contains a value that is not within the defined range for that IE. GTP messages with invalid optional IEs are processed as if the IE was not present.

cGgsnIeUnknownMsgs

The number of GTP messages received with an information element of an unknown type.

cGgsnIeOutOfOrderMsgs

The number of GTP messages received with an information element out of order.

cGgsnIeUnexpectedMsgs

The number of GTP messages received with an information element that is not expected in the GTP message, but is defined in GTP. GTP messages with unexpected IEs are processed as if the IE was not present.

cGgsnIeDuplicatedMsgs

The number of GTP messages received with a duplicated information element.

cGgsnOptIeIncorrectMsgs

The number of GTP messages received with an optional IE that is incorrect, which prevents the GGSN from processing the GTP message correctly.

cGgsnPdpWithoutTftExistsPdps

The number of create PDP context requests received without traffic flow template information element.

cGgsnNotifEnabled

Indicates whether cGgsnNotification notification will be sent when a notification is generated by the device. - 'true', it will enable the device to send a notification, as well as logging the notification to the cGgsnHistNotifTable. - 'false', it will p ...

cGgsnNotifLeastSeverLevel

Indicates the least severity level of the cGgsnNotification notifications to be generated by the device. Thus, notifications are not generated for alarms with a severity level less urgent than the value of this object. This object cannot be set to cleared ...

cGgsnGeneratedNotifs

The number of cGgsnNotification notifications that have been generated since sysUpTime.

cGgsnIgnoredAlarms

The number of alarms which are less severe than cGgsnNotifLeastSeverLevel since sysUpTime, and thus, for which no notification was generated.

cGgsnHistNotifMaxLength

The maximum number of entries to be retained in the cGgsnHistNotifTable. When the table is full, the oldest entries are removed to make space for new entries.

cGgsnHistNotifLatestIndex

The value of cGgsnHistNotifIndex for the most recently created entry in cGgsnHistNotifTable.

cGgsnHistNotifTable

A history table of the most recent cGgsnNotification notifications generated by this device. If a new cGgsnNotification notification is generated when the number of entries is equal to cGgsnHistNotifMaxLength, then the oldest entry is deleted and replaced ...

cGgsnHistNotifEntry

Detailed information concerning a particular notification that previously generated from this device.

cGgsnHistNotifIndex

A monotonically increasing integer for the sole purpose of indexing notifications. When it reaches the maximum value, it wraps the value back to 1.

cGgsnHistNotifType

This object indicates the type of notification.

cGgsnHistNotifSeverity

This object indicates the severity level of the notification. This object cannot be set to cleared(1) or indeterminate(2).

cGgsnHistNotifTimestamp

This object indicates the value of sysUpTime when this notification was generated.

cGgsnHistNotifGgsnIpAddrType

This object indicates the type of Internet address by which cGgsnHistNotifGgsnIpAddr is reachable.

cGgsnHistNotifGgsnIpAddr

The object indicates the IP address that uniquely identifies the device which generated the notification.

cGgsnHistNotifInfo

A textual description of cGgsnHistNotifType, which potentially contains additional information (more than just the type of alarm). If the text of the message exceeds 64 bytes, the message will be truncated to 63 bytes and a '*' character will be appended ...

cGgsnServiceNotifEnabled

Indicates whether cGgsnInServiceNotif notification and cGgsnMaintenanceNotif notification will be sent when a notification is generated by the device. - 'true', it will enable the device to send a notification. - 'false', it will prevent the device from ...

cGgsnMemoryNotifEnabled

Indicates whether cGgsnMemThresholdReachedNotif notification and cGgsnMemThresholdClearedNotif notification will be sent when a notification is generated by the device. - 'true', it will enable the device to send a notification. - 'false', it will preven ...

cGgsnPdfNotifEnabled

Indicates whether cGgsnPdfStateUpNotif notification and cGgsnPdfStateDownNotiff notification will be sent when a notification is generated by the device. - 'true', it will enable the device to send a notification. - 'false', it will prevent the device fr ...

cGgsnGlobalErrorNotifEnabled

Indicates whether cGgsnGlobalErrorNotif notification will be sent when a notification is generated by the device. - 'true', it will enable the device to send a notification. - 'false', it will prevent the device from sending out a notification.

cGgsnAccessPointNotifEnabled

Indicates whether cGgsnAccessPointNameNotif notification will be sent when a notification is generated by the device. - 'true', it will enable the device to send a notification. - 'false', it will prevent the device from sending out a notification.

cGgsnPdpNotifEnabled

Indicates whether cGgsnPacketDataProtocolNotif notification will be sent when a notification is generated by the device. - 'true', it will enable the device to send a notification. - 'false', it will prevent the device from sending out a notification.

cGgsnDefaultIpAllocationMethod

Specifies the default method by which the GGSN obtains address leases for mobile user sessions. - 'disable', which indicates that dynamic address allocation is disabled. - 'dhcp', which indicates that the DHCP server will be used. - 'radius', which indica ...

cGgsnIdlePdpPurgeTimer

This object specifies the time that the GGSN waits before purging idle PDP contexts. A value '0' will disable the purge timer.

cGgsnIpDupProtectTable

This table contains the range of IP address used in the GPRS PLMN. These IP addresses are used to avoid IP address duplication in GPRS network. IP address duplication occurs when a MS uses an IP address which is already used in the PLMN. The IP addresses ...

cGgsnIpDupProtectEntry

Entry containing the start and end IP address in the address range. An Entry with start IP > end IP is not allowed. No new entry will be accepted if that would cause any IP address(es) to be represented by more than one row in this table.

cGgsnMsExcludeRangeStartIpType

The type of Internet address by which cGgsnMsExcludeRangeStartIp is reachable. The value of this object should be same as cGgsnMsExcludeRangeEndIpType.

cGgsnMsExcludeRangeStartIp

Starting IP address in the address range.

cGgsnMsExcludeRangeEndIpType

The type of Internet address by which cGgsnMsExcludeRangeEndIp is reachable. The value of this object should be same as cGgsnMsExcludeRangeStartIpType.

cGgsnMsExcludeRangeEndIp

Ending IP address in the address range.

cGgsnIpDupProtectRowStatus

This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo' and the objects cGgsnMsExcludeRangeStartIpv6Prefixlen and cGgsnMsExcludeRangeEndIpv6Prefixlen should be set to valid values. ...

cGgsnMsExcludeRangeStartIpv6Prefixlen

This object represents the IPv6 prefix length supplied for the cGgsnMsExcludeRangeStartIp.The value of this object will be zero when cGgsnMsExcludeRangeStartIpType is IPv4.

cGgsnMsExcludeRangeEndIpv6Prefixlen

This object represents the IPv6 prefix length supplied for the cGgsnMsExcludeRangeEndIp.The value of this object will be zero when cGgsnMsExcludeRangeEndIpType is IPv4.

cGgsnDefaultAggregTable

This table contains the list of default aggregate routes configured on the GGSN. GGSN uses a static host route to forward user data packets for each PDP context received from Gi interface to Gn interface. Using the aggregate route (address range), the tot ...

cGgsnDefaultAggregEntry

An Entry contains the IP network prefix which is used to combine the routes of PDP requests for the same network as a single route on the GGSN.

cGgsnDefaultAggregIpAddrType

This object specifies the type of Internet address denoted by cGgsnDefaultAggregIpAddr.

cGgsnDefaultAggregIpAddr

This object specifies the IP address whose network prefix is going to be defined by cGgsnDefaultAggregIpMask.

cGgsnDefaultAggregIpMask

This object specifies the net-mask pertaining to cGgsnDefaultAggregIpAddr.

cGgsnDefaultAggregRowStatus

This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. The values 'createAndWait' and 'notInService' are not supported.

cGgsnDefaultAaaAuthServerGroup

This object specifies the AAA radius server group that is used for authentication by all APN's on this GGSN.

cGgsnDefaultAaaAccServerGroup

This object specifies the AAA radius server group that is used for accounting by all APN's on this GGSN.

cGgsnPppVirtualTemplate

This object represents the virtual template interface used by PPP Type PDP's.

cGgsnPppRegenVirtualTemplate

This object represents the virtual template interface used for PPP Regeneration by the APN's on which PPP Regeneration is configured. The value zero indicates that no interface is specified.

cGgsnPlmnIpAddrRangeTable

This table contains the range of IP addresses that belong to the PLMN nodes in a GPRS network. This range does not include address of various entities like RADIUS, DHCP, DNS servers, etc., which are not part of PLMN.

cGgsnPlmnIpAddrRangeEntry

Entry containing the first and last IP address in the address range. An Entry with first-IP > last-IP is not allowed. No new entry will be accepted if that would cause any IP address(es) to be represented by more than one row in this table.

cGgsnPlmnAddrRangeIpAddrType

The address type for cGgsnPlmnAddrRangeFirstIp and cGgsnPlmnAddrRangeLastIp addresses.

cGgsnPlmnAddrRangeFirstIp

First IP address in the address range.

cGgsnPlmnAddrRangeLastIp

Last IP address in the address range.

cGgsnPlmnAddrRangeRowStatus

This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo' and the objects cGgsnPlmnAddrRangeFirstIpv6Prefixlen and cGgsnPlmnAddrRangeLastIpv6Prefixlen should be set to valid values. ...

cGgsnPlmnAddrRangeUsage

This object specifies how the address range will be used by the GGSN. When set to 'security', the address range is used for GGSN security feature i.e. any TPDU with destination address that falls in this address range will be discarded. When set to 'sgsn' ...

cGgsnPlmnAddrRangeFirstIpv6Prefixlen

This object represents the IPv6 prefix length supplied for the cGgsnPlmnAddrRangeFirstIp .The value of this object will be zero when cGgsnPlmnAddrRangeFirstIpType is IPv4.

cGgsnPlmnAddrRangeLastIpv6Prefixlen

This object represents the IPv6 prefix length supplied for the cGgsnPlmnAddrRangeLastIp .The value of this object will be zero when cGgsnPlmnAddrRangeLastIpType is IPv4.

cGgsnPdfTable

This table contains the details of PDF server that the GGSN supports. The table elements describes their properties. PDF's are the server's to which the client GGSN makes the TCP connection using the COPS protocol over the Go interface. GGSN can have conn ...

cGgsnPdfEntry

Entry containing the PDF servers details (name and IP address) and also how the GGSN should communicate with PDF, like timeout when there is no response, number of retries.

cGgsnPdfGroupName

This object specifies the PDF group name. Currently this group name is just an identity to this group.

cGgsnPdfDomainName

This is a Fully Qualified Domain Name (FQDN), which has to be configured along with the IP address of the PDF. There will be no name resolving for the FQDN, it will be used as it is.

cGgsnPdfIpAddressType

This object specifies the type of IP address of the PDF server.

cGgsnPdfIpAddress

This object specifies the IP address of the PDF server. The type of the address is specified by the object cGgsnPdfIpAddressType.

cGgsnPdfRowStatus

This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo(4)'. To delete a row, set this object to 'destroy(6)'.

cGgsnPdfReconnectTimeOut

Whenever a connection outage is detected (by keepalive mechanism etc.) by GGSN to the PDF server. The GGSN waits for the interval configured in this object. Once this timer is expired, another attempt is made for connection establishment.

cGgsnPdfReconnectRetries

This is the number of attempts for connection establishment after the timeout value set in cGgsnPdfReconnectTimeOut. After the configured number of retries, all the COPS sessions (and associated PDP contexts) are cleared. The value '65535' which is defaul ...

cGgsnPdfReconExpPdpDelete

This objects defines the handling of the PDP context in the connection loss scenario. When this object is set to true, then on connection loss, the PDP delete will be initiated.

cGgsnPdfReqRetryTimeOut

For each COPS REQ sent to PDF, GGSN will start a request retry timer with this value. If DEC is not received within the timeout, the REQ is resent for cGgsnPdfReqRetries times.

cGgsnPdfReqRetries

This is the number of retries which has to be sent for the COPS REQ being sent. If DEC is not received even after sending the COPS REQ for configured number of retries, the PDP context activation/modification (which had triggered this REQ) is rejected.

cGgsnPcscfTable

This table contains the entries of P-CSCF groups with the addresses configured. One or more IP address can be configured per group name. This group in turn will be mapped to the APN. P-CSCF is a network element providing session management services. When ...

cGgsnPcscfEntry

An entry is created when the user configures the group name and an IP address is set.

cGgsnPcscfGroupName

This group name is the identifier for the P-CSCF addresses configured.

cGgsnPcscfIpAddressType

This object specifies the type of the P-CSCF IP address.

cGgsnPcscfIpAddress

This object specifies the IP address of the P-CSCF. The type of this address is specified by the object cGgsnPcscfIpAddressType.

cGgsnPcscfRowStatus

This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo(4)'. To delete a row, set this object to 'destroy(6)'.

cGgsnMemoryThreshold

GGSN memory overload protection is a mechanism to prevent GGSN from completely running out of memory when GGSN is running near its capacity or in some failure scenarios like CG down. A protection mechanism was put into place where charging triggers would ...

cGgsnServiceMode

GGSN supports this GPRS service mode for maintenance purposes. Two modes are supported in GGSN, operational and maintenance mode. 'inService' mode represents nominal operation, and there will be no change in the way the GGSN operates. 'maintenance' mode ...

cGgsnPlmnTable

Mobile Country Code (MCC) and Mobile Network Code (MNC) together identify a GPRS PLMN of an operator. PLMN Ids other than home PLMNs are considered as foreign. There will be some situations where some foreign PLMNs has to be treated as trusted PLMNs. This ...

cGgsnPlmnEntry

Entry containing list of home PLMN Ids and the Trusted PLMN Ids.

cGgsnPlmnMcc

The Mobile Country Code (MCC) is part of the PLMN Id.

cGgsnPlmnMnc

The Mobile Network Code (MNC) is part of the PLMN Id.

cGgsnPlmnRowStatus

This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. To modify a row, the row needs to be deleted and created fresh with new valu ...

cGgsnPlmnScope

This object specifies whether the PLMN is home or trusted. Only one PLMN entry can be home

cGgsnSessionTimeout

This object specifies the PDP context timeout value. The PDP context will be terminated after this timer expiry. The value present in this will have meaning when the object cGgsnRadAttrSessTimeout is set to 'true' and if the attribute#27 not received from ...

cGgsnThruputIntervalOne

This object and cGgsnThruputIntervalTwo specifies the interval at which the data throughput needs to be collected per APN/SGSN. Once this object is set to some valid value, the data throughput collections gets started for per configured APN and per PATH c ...

cGgsnThruputIntervalTwo

This object specifies the time interval TWO for collecting the throughput per APN/SGSN. This object is same as cGgsnThruputIntervalOne. It's just an option for a second throughput collection for a different throughput interval time. The value 0 means the ...

cGgsnCompliance3GppGgsn

This object specifies the compliance level for the particular GGSN version present in cGgsnVersion. This object can be used to set back the compliance level to the previous GGSN version. When set to 'default', the compliance level for that GGSN version in ...

cGgsnCreateReqV1UpdExistPdp

This object is used for backward compatibility due to to implementation of CR 311. CR 311: The SGSN shall not send a Create PDP Context Request for an already active context. If a new Create PDP Context Request is incoming on TEID 0 for an already active ...

cGgsnRadAttrSessTimeout

This object is used for enabling the session timeout feature on the global (router) level set using cGgsnSessionTimeout, APN level (cgprsAccPtAbsoluteSessionTimer, which is defined in CISCO-GPRS-ACC-PT-MIB and is outside the scope of this MIB) and also pa ...

cGgsnDownlinkVerifyMsDisable

This object enables the feature which will allow the GGSN to route IP packets beyond MS. This works only if a static route is added in GGSN to the node beyond the MS. On enabling this feature, GGSN will route the packets in both process switch path and ce ...

cGgsnSlbMode

GTP SLB can operate in two modes-dispatched and directed. - 'dispatched' mode: It forwards the create request without changing the destination IP address (vserver address) and the create response comes from the same (vserver) address. - 'directed' mode: I ...

cGgsnSlbNotif

This object is used to enable or disable the GGSN behavior of sending CAC failure notification to SLB, or session failure notification to SLB. If this object is set to cacFailure(1), then this object is required to enable the feature in the dispatched mod ...

cGgsnSlbVserverTable

This table includes the different virtual servers (IP address of virtual servers) and the elements gives the interface to reach these servers. The table is indexed on the vserver address. The table objects can be modified, when the RowStatus (cGgsnSlbVser ...

cGgsnSlbVserverEntry

Entry contains the Virtual server details(IP address type, IP address)and next hop address and VRF name.

cGgsnSlbVserAddrType

This object specifies the address type of the vserver. IP address of type ipv(4) is only supported.

cGgsnSlbVserAddress

This object specifies the address of GTP vservers. It is required only in directed mode. If SLB is running in directed mode and this object is not configured, then the feature remains disabled. If SLB is running in the dispatched mode, the vserver that fo ...

cGgsnSlbVserNextHopAddrType

This object specifies the IP address type to reach the virtual server.

cGgsnSlbVserNextHopAddress

This object specifies the IP address to reach the vserver.

cGgsnSlbVserVrfName

This object specifies the VRF name on an interface on GGSN connected to SLB, to reach the vserver.

cGgsnSlbVserRowStatus

This object will create new row into the table or deletes the existing one. To create a row, set this object to 'createAndGo(4)'. To delete a row, set this object to 'destroy(6)'.

cGgsnSlbNotifyCacFailure

This object is used to enable or disable the GGSN behavior of sending CAC failure notification to SLB. CAC fails on GGSN if either the maximum number of PDPs reaches limit or there is not enough bandwidth for the traffic class for the APN. If this object ...

cGgsnSlbNotifySessionDeletion

This object is used to enable or disable the GGSN behavior of sending session deletion notification to SLB. If this object is set to 'true', GGSN sends delete notification message to SLB when the last PDP associated with a IMSI is deleted.

cGgsnVersion

This object specifies the which release of GPRS image is currently running on the GGSN.

cGgsnActiveNetworkInitPdps

This object represents the number of network initiated PDP contexts that are currently active. Trigger Condition: This counter is incremented / decremented by the create/delete PDP context request message respectively.

cGgsnActivePppPdps

This object represents the number of PPP PDP contexts that are currently active. Trigger Condition: This counter is incremented / decremented by the create/delete PPP PDP context request message respectively.

cGgsnActivePppRegenPdps

This object represents the number of PPP-Regen PDP contexts that are currently active. Trigger Condition: This counter is incremented / decremented by the create/delete PPP Regeneration PDP context request message respectively.

cGgsnPendingPppRegenPdps

This object represents the current number of pending PPP regeneration sessions. Trigger Condition: This counter is triggered by the create PPP Regeneration PDP context request message.

cGgsnActiveGtpVersion0Pdps

This object represents the current number of active GTP v0 PDP contexts. Trigger Condition: This counter is incremented / decremented by the create/delete PDP context request message respectively.

cGgsnActiveGtpVersion1Pdps

This object represents the current number of active GTP v1 PDP contexts. Trigger Condition: This counter is incremented / decremented by the create/delete PDP context request message respectively.

cGgsnGtpEncapInterface

This object represents the ifIndex of the interface on which gtp encapsulation is configured. Only one interface can be configured with gtp encapsulation on the GGSN. A zero value indicates that no interface is configured with gtp encapsulation.

cGgsnServiceModeStatus

This object represents the internal service mode which GGSN maintains. The service switching is done with object cGgsnServiceMode.

cGgsnConfigVersion

This object specifies the config version of GPRS image. The value of this object will be of the form Version.Release.Maintenence. This object provides information on the ability of the devices to support configuration operations.

cGgsnPrepaidPDPs

This object specifies the number of prepaid PDPs created since the last clearance of statistics (GPRS service aware statistics).

cGgsnPostpaidPDPs

This object specifies the current number of postpaid PDPs, created since the last clearance of statistics (GPRS service aware statistics).

cGgsnActivatedIpv6Gtpv0Pdp

This object represents the current number of active GTP v0 ipv6 PDP contexts. Trigger Condition: This counter is incremented by the create PDP context request and decremented by the delete PDP context request message.

cGgsnActivatedIpv6Gtpv1Pdp

This object represents the current number of active GTP v1 ipv6 PDP contexts. Trigger Condition: This counter is incremented by the create PDP context request and decremented by the delete PDP context request message.

cGgsnActivatedIpv6Ms

This object represents the current number of MS with active IPv6 PDPs.

cGgsnGtpEncapsuTable

This table contains information about ifIndex of the interfaces on which gtp encapsulation is configured.

cGgsnGtpEncapsuEntry

The cGgsnGtpEncapsuEntry represents the ifIndex of the interface on which gtp encapsulation is configured. Only one interface can be configured with gtp encapsulation on the GGSN. Entry in the table created whenever interface is configured with gtp encaps ...

cGgsnGtpEncapsuInterface

This object represents the ifIndex of the interface on which gtp encapsulation is configured. Only one interface can be configured with gtp encapsulation on the GGSN. A zero value indicates that no interface is configured with gtp encapsulation.

cGgsnPdfServerAddrType

This object specifies the type of IP address of the PDF server.

cGgsnPdfServerAddr

This object specifies the IP address of the PDF server. The type of this address is specified by the object cGgsnPdfServerAddrType.

cGgsnNotifAccessPointName

This object specifies the Access Point Name and is used specify the name in the cGgsnAccessPointNameNotif notification.

cGgsnNotifPdpImsi

This object specifies the International Mobile Subscriber Identity (IMSI) of the user for whom the notification is generated. This object is used to specify IMSI of the user in the cGgsnPacketDataProtocolNotif notification.

cGgsnGlobalErrorTypes

This object indicates the types of global errors as follows. 'ggsnServiceUp' - GGSN service has started 'ggsnServiceDown' - GGSN service is shutdown 'mapSgsnUp' - MAP-SGSN service has started 'mapSgsnDown' - MAP-SGSN service is shutdown 'n ...

cGgsnAccessPointErrorTypes

This object indicates the types access point errors as follows. 'noRadius' - RADIUS Server is not configured. 'ipAllocationFail' - Unable to allocate IP address. 'apnUnreachable' - Unable to reach access point.

cGgsnPacketDataProtoErrorTypes

This object indicates the types of Packet Data Protocol errors as follows. 'noResource' - Mobile Station initiated PDP count reaches the specified limit or Network initiated PDP count reaches the specified limit. 'authenticationFail' - Authentication fail ...

cGgsnNotifPdpMsisdn

This object specifies the Mobile Subscriber ISDN (MSISDN) value of the user for whom the notification is generated. This object is used to specify MSISDN of the user in the cGgsnPacketDataProtocolNotif notification.

cGgsnStatisticsGroup

A collection of statistics on GGSN.

cGgsnNotifMgmtGroup

A collection of objects related with notification management on GGSN.

cGgsnConfigurationsGroup

A collection of objects related with configurations on GGSN. This is deprecated by cGgsnConfigurationsGroupRev1.

cGgsnStatusGroup

A collection of objects representing status on GGSN.

cGgsnConfigurationsGroupRev1

A collection of objects related with configurations on GGSN.

cGgsnUmtsGroup

A collection of objects pertaining to GTP v1.

cGgsnStatisticsGroupRev1

A collection of statistics on GGSN. This group is deprecated by cGgsnStatisticsGroupRev2.

cGgsnConfigurationsGroupRev2

A collection of objects related with configurations on GGSN. This object group is superceded by cGgsnConfigurationsGroupRev3.

cGgsnStatusGroupRev1

A collection of objects representing status on GGSN.

cGgsnNotifInfoGroup

A collection of objects representing Notif Info on GGSN.

cGgsnNotifInfoGroupRev1

A collection of objects representing Notif Info on GGSN. This object group is superceded by cGgsnNotifInfoGroupRev2.

cGgsnNotifMgmtGroupRev1

A collection of objects related with notification management on GGSN. This object group is superceded by cGgsnNotifMgmtGroupRev2.

cGgsnStatusGroupConfigVer

A collection of objects representing config version of GGSN.

cGgsnConfigurationsGroupR60

A collection of objects representing configurations on GGSN. This group is deprecated by cGgsnConfigurationsGroupR60Rev1.

cGgsnStatisticsGroupR60

A collection of objects related with statistics.

cGgsnStatusGroupR60

A collection of objects related to gtp status.

cGgsnNotifInfoGroupR60

A collection of objects representing the Notif info on GGSN.

cGgsnConfigurationsGroupR60Rev1

A collection of objects representing configurations on GGSN.

cGgsnStatisticsGroupRev2

A collection of objects related with statistics.

cGgsnStatusGroupR70

A collection of objects related with status.

cGgsnConfigurationsGroupRev3

A collection of objects related with configurations on GGSN. This is deprecated by cGgsnConfigurationsGroupRev4.

cGgsnNotifMgmtGroupRev2

A collection of objects related with notification management on GGSN.

cGgsnNotifInfoGroupRev2

A collection of objects representing Notif Info on GGSN.

cGgsnConfigurationsGroupRev4

A collection of objects related with configurations on GGSN.

cGgsnStatusGroupR90

A collection of objects which maintains the mapping between CGSN interfaces and gtp encapsulated interfaces.

cGgsnConfigurationsGroupSup1

This group is supplementary to cGgsnConfigurationsGroupRev4.