CISCO-GGSN-QOS-MIB Download

cggsnQosMappingMethod

This object specifies the type of QoS method (canonical or delay or none (best-effort) or umts) mapped to GPRS QoS. DEFVAL { none } ::= { cggsnQosGeneralConfig 1 } SYNTAX SEQUENCE OF CggsnQosClassIpTosMapEntry MAX-ACCESS ...

cggsnQosClassIpTosMapEntry

Entry which denotes mapping of different QoS classes to TOS precedence class and also the number of PDP contexts associated with each QoS Class.

cggsnQosClass

This object specifies different QoS Classes of either 'canonical' or 'delay' QoS based on the value set to cggsnQosMappingMethod. The following is how the value needs to be interpreted. If cggsnQosMappingMethod is set to delay(3), 1 - delay1, 2 - delay2, ...

cggsnQosMappedIpTos

This object specifies the IP TOS precedence to which cggsnQosClass is mapped. Higher TOS precedence value indicates a higher service priority. The values '6 (internetwork_control)' and '7 (network_control)' of TOS are not used in mapping.

cggsnQosCurrentPdps

This object specifies the current number of PDP contexts that have cggsnQosClass.

cggsnQosTotalBandwidthResrc

The total amount of bandwidth resource on the GGSN, this total depends on various factors like system throughput, memory size, maximum number of PDP contexts supported. A portion of the total resources will be allocated to a user at the PDP context activ ...

cggsnQosCurrentUsedBandwidth

The current amount of bandwidth resource used on the GGSN. This object can only be retrieved if cggsnQosMappingMethod is set to canonical(2).

cggsnQosPremiumMtDeviationFactor

This object specifies the mean throughput deviation factor that the GGSN uses to calculate the allowable data throughput for Premium QoS. This object can only be retrieved if cggsnQosMappingMethod is set to canonical(2).

cggsnQosBestEffrtBandWidthFactor

This object specifies the bandwidth factor to be applied to canonical best-effort QoS class. This object can only be retrieved if cggsnQosMappingMethod is set to canonical(2).

cggsnQosPremiumMeanThroughput

The sum of the mean throughput of premium class QOS users on the GSN. This object can only be retrieved if cggsnQosMappingMethod is set to canonical(2).

cggsnQosNormalMeanThroughput

The sum of the mean throughput of normal class QOS users on the GSN. This object can only be retrieved if cggsnQosMappingMethod is set to canonical(2).

cggsnQosBestEffortMeanThroughput

The sum of the mean throughput of best-effort class QOS users on the GSN. This object can only be retrieved if cggsnQosMappingMethod is set to canonical(2).

cggsnQosTrafficClassPhbTable

This table represents the mapping between a given traffic class and the corresponding DS PHB group. The table has one entry for each possible traffic class type. The table will be empty if the cggsnQosMappingMethod is not set to 'umts'. ::= { cggsnQosUmts ...

cggsnUmtsQosMapImsSigTrafHandPri

This object is to set the priority of traffic handling for interactive class. This object can be set only if the traffic class is set to 'interactive' in cggsnUmtsQosMapImsSigTrafClass. This object is deprecated as the IMS is not supported from GGSN rel ...

cggsnUmtsQosCacPolicyTable

Call Admission Control (CAC) is to ensure that network resources are not oversubscribed to protect real-time traffic such as voice (conversational) and video (streaming), etc. Therefore before admitting a new PDP create, call admission control will be per ...

cggsnUmtsQosCacPolicyName

This object is the CAC policy name which will be attached to one or more APN's.

cggsnUmtsQosCacRowStatus

This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'.

cggsnUmtsQosCacMaxPdp

This object defines maximum number of PDPs that can be created. If total number of activated PDPs exceeds the maximum number, the PDP context will be rejected. Value '0' means there is no limit on PDP context creation.

cggsnUmtsQosCacPdpThreshold

This object defines the threshold value to accept only PDP context with allocation/retention priority 1 when the threshold is reached. This object can be set only when cggsnUmtsQosCacMaxPdp is set to some value and also the this object should have lesser ...

cggsnUmtsQosCacMaxTrafficClass

This object defines the highest traffic class that can be accepted. If the requested traffic class is higher than configured one, the PDP context create request will be rejected. Traffic class can not be downgraded.

cggsnUmtsQosCacMaxTrafHandPrio

This object defines the priority for the traffic class set in cggsnUmtsQosCacMaxTrafficClass, but this priority is applicable only for traffic class type 'interactive'. If not set, then any priority will be accepted.

cggsnUmtsQosCacMaxThruPut

This object defines highest peak throughput class for R97/98 QoS can be accepted in a particular APN. This is used only for GTP v0 PDP or GTP v1 PDP containing R97/98 QoS. If the requested Peak throughput class is higher than highest number, the request w ...

cggsnUmtsQosCacMaxThruPutReject

This object is used for downgrading or PDP to be rejected when cggsnUmtsQosCacMaxThruPut is set. 'true' - Reject the exceeding max throughput traffic. 'false' - Downgrade to the max throughput value set in cggsnUmtsQosCacMaxThruPut This object can be set ...

cggsnUmtsQosCacMaxDelayClass

This object defines highest delay class for R97/98 QoS can be accepted in a particular APN. This object is used only for GTP v0 PDP, or GTP v1 PDP containing R97/98 QoS. If Delay class is higher than highest number, the request will be either downgraded t ...

cggsnUmtsQosCacMaxDelayClassRej

This object is used for downgrading or PDP to be rejected when cggsnUmtsQosCacMaxDelayClass is set. 'true' - Reject the exceeding max delay class. 'false' - Downgrade to the max delay class value set in cggsnUmtsQosCacMaxDelayClass This object can be set ...

cggsnUmtsQosCacTcTable

This table defines Maximum Bit Rate and/or Guaranteed Bit rate that can be allowed for each traffic class in both uplink and downlink directions. For the IMS PDP context, this parameter is taken from authorized QoS obtained from PDF. The SNMP entity creat ...

cggsnUmtsQosCacTcEntry

Entry which has all the details of each traffic class with their MBR/GBR values for uplink/downlink traffic and also the condition for rejecting or downgrading if the requested MBR/GBR exceeds.

cggsnUmtsQosCacTcTrafClass

This object specifies the UMTS traffic class for which MBR/GBR in uplink/downlink has to be set. When cggsnUmtsQosCacTcBitRateType is set to 'guaranteed', the values 'conversational' and 'streaming' can only be set to this object.

cggsnUmtsQosCacTcBitRateType

This object specifies the type of bit rate applicable for traffic class denoted by cggsnUmtsQosCacTcTrafClass.

cggsnUmtsQosCacTcDirection

This object specifies the direction of traffic.

cggsnUmtsQosCacTcRowStatus

This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. cggsnUmtsQosCacTcBitRate is mandatory object for creating a row. To delete a row, set this object to 'destroy'.

cggsnUmtsQosCacTcBitRate

This object specifies the MBR/GBR allowed for the traffic class defined by cggsnUmtsQosCacTcTrafClass. This object is deprecated and replaced by cggsnUmtsQosCacTcRevBitRate. While retrieving the the value of cggsnUmtsQosCacTcBitRate, the maximum value of ...

cggsnUmtsQosCacTcReject

This object is to specify whether the requested MBR/GBR be downgraded or PDP to be rejected if the requested MBR/GBR exceeds the value set in cggsnUmtsQosCacTcBitRate. 'true' - The request will be rejected if exceeded. 'false' - The requested MBR will be ...

cggsnUmtsQosCacTcRevBitRate

This object specifies the MBR/GBR allowed for the traffic class defined by cggsnUmtsQosCacTcTrafClass.

cggsnUmtsQosCacBWPoolTable

This table defines allocation of virtual bandwidth pool for the traffic classes. Basically there are two types of bandwidth pool, Physical & Virtual. Physical bandwidth is the egress interface bandwidth. It is not supported and will not be explained more. ...

cggsnUmtsQosCacBWPoolEntry

Each entry in this table holds the total bandwidth that this pool provides and the corresponding allocation to the traffic classes.

cggsnUmtsQosCacBWPoolName

This object is the name of the virtual bandwidth pool which will be attached to the APN.

cggsnUmtsQosCacBWPoolRowStatus

This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'.

cggsnUmtsQosCacBWPoolBWVal

This object defines the total bandwidth for this pool. This object is a must while creating a row in this table.

cggsnQosBWPoolTrafClassTable

This table is the sub table of cggsnUmtsQosCacBWPoolTable. This contains all the traffic class bandwidth allocation in percentage or absolute value. The total value of the bandwidth allocated for different traffic class per pool must not exceed 100 percen ...

cggsnQosBWPoolTrafClassEntry

Each entry in this table holds the allocation of bandwidth for a traffic class in percentage or absolute value.

cggsnQosBWPoolTrafClass

This object defines the traffic class for which the allocation of bandwidth is needed.

cggsnQosBWPoolTrafClassRowStatus

This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'.

cggsnQosBWPoolTrafClassPercent

This object is to specify whether the bandwidth allocation should be considered as percentage or absolute value. If this object is set to 'true', then the bandwidth reserved will be in percentage, given by cggsnQosBWPoolTrafClassPerVal. If this object is ...

cggsnQosBWPoolTrafClassPerVal

This object denotes the percent of bandwidth allocated for the traffic class set in cggsnQosBWPoolTrafClass. This object will be valid and can be set only if cggsnQosBWPoolTrafClassPercent is set to 'true'.

cggsnQosBWPoolTrafClassAbsVal

This object denotes the absolute value of bandwidth allocated for the traffic class set in cggsnQosBWPoolTrafClass. This object will be valid and can be set only if cggsnQosBWPoolTrafClassPercent is set to 'false'.

cggsnQosBWPoolTrafClassAvailBw

This object denotes the absolute available bandwidth left unused for traffic class set in cggsnQosBWPoolTrafClass.

cggsnQosGeneralConfigGroup

A collection of objects providing general QoS configurations.

cggsnQosCanonicalQosGroup

A collection of objects specific to Canonical QoS on GGSN.

cggsnQosUmtsQosGroup

A collection of objects pertaining to the UMTS QoS on GGSN. ::= { cggsnQosMIBGroups 3 } OBJECTS { cggsnUmtsQosMapImsSigTrafClass, cggsnUmtsQosMapImsSigTrafHandPri, cggsnUmtsQosCacRowStatus, cggsnUmtsQosCacMaxPdp, cggsnUmtsQosCacPdpThreshold ...

cggsnQosUmtsCacGroupRev1

A collection of objects pertaining to the CAC on GGSN. This is deprecated by cggsnQosUmtsCacGroupRev2.

cggsnQosUmtsCacGroupRev2

A collection of objects pertaining to the CAC on GGSN.