CISCO-OTN-IF-MIB Download

MIBs list

This MIB module defines the managed objects for physical layer characteristics of DWDM optical channel interfaces and performance statistics objects for protocol specific error counters in DWDM optical devices. Performance monitoring (PM) parameters are used by service providers to gather, store, set thresholds for and report performance data for early detection of problems. Thresholds are used to set error levels for each PM parameter. During the accumulation cycle, if the current value of a performance monitoring parameter reaches or exceeds its corresponding threshold value, a threshold crossing alarm (TCA) is generated. The TCAs provide early detection of performance degradation.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-OTN-IF-MIB

coiIfControllerTable: This table provides management information for physical layer related attributes of interfaces with an ifType of opticalChannel(195).
coiIfControllerEntry: An entry containing management information on physical layer related attributes of interfaces with an ifType opticalChannel(195). Entries are created by the agent when a new interface is added to the ifTable. Entries are deleted by the agent when an inter ...
coiIfControllerLoopback: This object is used to configure the loopback mode of the interface. valid values are - 'noLoop' - No Loopback present. 'otherLoop' - A loopback of type other than rest of types defined in this enumeration. 'diagnosticLoop' - This is an inter ...
coiIfControllerWavelength: This object is used to configure the wavelength of operation on applicable optical channel interfaces.
coiIfControllerLaserAdminStatus: This object is used to configure laser status on applicable interfaces. when it is set to down(2), it results in traffic drop and there should be corresponding change in coiIfControllerLaserOperStatus. Valid values are - 'up' - Turn on the Las ...
coiIfControllerLaserOperStatus: This object gives the current operational state of the Laser. Valid values are - 'up' - The laser is operational. 'down' - The laser is not operational. if coiIfControllerLaserAdminStatus is down(2) then coiIfControllerLaserOperStatus should be do ...
coiIfControllerOtnStatus: This object allows the management client to enable the OTN (ITU-T G.709) framing on applicable interfaces of ifType opticalChannel(195). Valid values are - 'true' - Enables OTN (ITU-T g.709) framing on the interface. 'false' - Disables OTN (ITU-T g.709 fr ...
coiIfControllerFECMode: This object allows the management client to enable FEC ( Forward Error Correction ) on applicable interfaces. FEC is a technique that improves digital channel quality through the addition of redundant data at the sending node. This redundant data is decod ...
coiIfControllerTDCOperMode: This object gives the operational mode of the Tuned Dispersion Compensator (TDC). The values may be - 'auto' - Automatic tuning of dispersion compensation. 'manual' - Manual tuning of dispersion compensation.
coiIfControllerTDCOperStatus: This object gives the operational status of the Tuned Dispersion Compensator (TDC). The values may be - 'disabled' - TDC has been disabled. 'acquiring' - TDC is acquiring or tuning to the desired compensation setting. 'locked' - TDC has been tuned ...
coiIfControllerTDCOperSetting: This object gives the dispersion compensation setting that the TDC has been tuned to. It is expressed in pico-seconds per nanometer. Example: The value of -650 represents a dispersion compensation setting of -650 ps/nm.
coiIfControllerPreFECBERMantissa: This object gives the mantissa part of the Pre FEC BER or correctable BER at any instance of time. It is represented in one hundreths of a unit.The exponent part is defined in coiIfControllerPreFECBERExponent Pre FEC BER is the BER of the signal before it ...
coiIfControllerPreFECBERExponent: This object gives the exponent part of the Pre FEC BER or correctable BER at any instance of time. It is represented in powers of 10. The mantissa part is defined in coiIfControllerPreFECBERMantissa. Pre FEC BER is the BER of the signal before it undergo ...
coiIfControllerQFactor: This Object gives the value of Q-Factor represented in one hundredths of a dB. Q-Factor represents the analog signal to noise ratio. It suggests the minimum correctable BER for a given signal. The higher the Q-factor, the better. Q-factor is expressed in ...
coiIfControllerQMargin: Q-Margin defines how much operational system margin that is available for a given circuit. Minimum margin should be defined by one's Network Engineering Group. Q-margin is expressed in dBQ. dBQ is a scale relative to min required Q-Factor given by coiIf ...
coiIfControllerOTNValidIntervals: This object gives the number of contiguous 15 minute intervals for which valid OTN performance monitoring data is available for the particular interface. The actual performance data is available in the following Tables coiOtnNearEndIntervalTable coiOtnFar ...
coiIfControllerFECValidIntervals: This object gives the number of contiguous 15 minute intervals for which valid FEC PM data is available for the particular interface. The actual performance data is available in the following Table coiFECIntervalTable The value of this object will be n (w ...
coiOtnNearEndThresholdsTable: This table provides objects for configuring OTN ( G.709 ) near end error thresholds on interfaces of ifType opticalChannel (195).
coiOtnNearEndThresholdsEntry: An entry containing management information for configuration of performance monitoring thresholds for a given monitor and threshold type. Entries can be created for interfaces with ifType of opticalChannel(195). Thresholds are created/destroyed through th ...
coiOtnNearEndThreshIntervalType: This object specifies the interval type during which the performance statistics were accumulated.
coiOtnNearEndThreshMonType: This object gives the type of performance monitoring for which the threshold is being set.
coiOtnNearEndThresholdType: This object gives the type of Error Threshold that is being set.
coiOtnNearEndThreshValue: This object is used to set the near end threshold value for the given threshold type as identified by coiOtnNearEndThresholdType.
coiOtnNearEndThreshStorageType: The storage type for this conceptual row.
coiOtnNearEndThreshStatus: This object controls the creation and deletion of a conceptual row in this table. The value of this object has no effect on whether other objects in this conceptual row can be modified. A conceptual row can not be made active until the coiOtnNearEndThresh ...
coiOtnFarEndThresholdsTable: This table provides objects for configuring OTN ( G.709 ) thresholds for far end of interfaces of ifType opticalChannel(195).
coiOtnFarEndThresholdsEntry: An entry containing managment information for configuration of far end performance monitoring thresholds for a given monitor and threshold type. Entries can be created for interfaces with ifType of opticalChannel(195). Thresholds are created/destroyed th ...
coiOtnFarEndThreshIntervalType: This object gives the interval type during which the performance statistics were accumulated in the far end of the interface.
coiOtnFarEndThreshMonType: This object gives specify the type of monitoring for which threshold is being set on interfaces in the far end of the interface .
coiOtnFarEndThresholdType: This object gives the type of Error Threshold that is being set on far end interfaces of ifType opticalChannel (195).
coiOtnFarEndThreshValue: This object is used to set the far end threshold value for the given threshold type as identified by the index coiOtnFarEndThresholdType.
coiOtnFarEndThreshStorageType: The storage type for this conceptual row.
coiOtnFarEndThreshStatus: This object controls the creation and deletion of a conceptual row in this table. The value of this object has no effect on whether other objects in this conceptual row can be modified. A conceptual row can not be made active until the coiOtnFarEndThreshV ...
coiOtnNearEndCurrentTable: This table contains the cumulative OTN (G.709) PM statistics for the near end of interfaces of ifType opticalChannel(195). The statistics are for the current interval of interval type identified by coiOtnNearEndCurIntervalType. The current PM statistics ...
coiOtnNearEndCurrentEntry: An entry containing management information on near end error/statistics counters such as Failure Counts, Errored Seconds...etc in the current interval
coiOtnNearEndCurIntervalType: This object gives the interval type during which the near end performance statistics are accumulated.
coiOtnNearEndCurrentMonType: This object gives the part of optical network for which the near end OTN performance statistics are being monitored.
coiOtnNearEndCurrentFCs: The counter associated with the number of failures encountered on the near end of interface in the current interval of type coiOtnNearEndCurIntervalType.
coiOtnNearEndCurrentESs: The counter associated with the number of Errored Seconds encountered on near end of interface in the current interval of type coiOtnNearEndCurIntervalType.
coiOtnNearEndCurrentSESs: The counter associated with the number of Severely Errored Seconds encountered on the near end of interface in the current interval of type coiOtnNearEndCurIntervalType.
coiOtnNearEndCurrentUASs: The counter associated with the number of Unavailable Seconds encountered on the near end of interface in the current interval of type coiOtnNearEndCurIntervalType.
coiOtnNearEndCurrentBBEs: The counter associated with the number of Background Block Errors encountered on the near end of interface in the current interval of type coiOtnNearEndCurIntervalType.
coiOtnNearEndCurrentESRs: The counter associated with the Errored Seconds Ratio on the near end of interface in the current interval of type coiOtnNearEndCurIntervalType.
coiOtnNearEndCurrentSESRs: The counter associated with the Severely Errored Seconds ratio on the near end of interface in current interval of type coiOtnNearEndCurIntervalType.
coiOtnNearEndCurrentBBERs: The counter associated with the Background Block Errors ratio on the near end of interface in current interval of type coiOtnNearEndCurIntervalType.
coiOtnFarEndCurrentTable: This table contains the cumulative OTN (G.709) PM stats for the far end of interfaces of ifType opticalChannel(195). The statistics are for the current interval of interval type identified by coiOtnFarEndCurIntervalType. The current PM statistics is the ...
coiOtnFarEndCurrentEntry: An entry containing managment information on far end error/statistics counters such as Failure Counts, Errored Seconds...etc in the current interval
coiOtnFarEndCurIntervalType: This object gives the interval type during which the performance statistics are accumulated in the far end of the interface.
coiOtnFarEndCurrentMonType: This object gives the part of optical network for which far end OTN performance statistics are being monitored.
coiOtnFarEndCurrentFCs: The counter associated with the number of failures encountered on far end of interface in current interval of type coiOtnFarEndCurIntervalType.
coiOtnFarEndCurrentESs: The counter associated with the number of Errored Seconds encountered on far end of interface in current interval of type coiOtnFarEndCurIntervalType.
coiOtnFarEndCurrentSESs: The counter associated with the number of Severely Errored Seconds encountered on far end of interface in the current interval of type coiOtnFarEndCurIntervalType.
coiOtnFarEndCurrentUASs: The counter associated with the number of Unavailable Seconds encountered on far end of interface in the current interval of type coiOtnFarEndCurIntervalType.
coiOtnFarEndCurrentBBEs: The counter associated with the number of Background Block Errors encountered on far end of interface in the current interval of type coiOtnFarEndCurIntervalType.
coiOtnFarEndCurrentESRs: The counter associated with the Errored Seconds Ratio on far end of interface in the current interval of type coiOtnFarEndCurIntervalType.
coiOtnFarEndCurrentSESRs: The counter associated with the Severely Errored Seconds ratio on far end of interface in the current interval of type coiOtnFarEndCurIntervalType.
coiOtnFarEndCurrentBBERs: The counter associated with the Background Block Errors ratio on far end of interface in the current interval of type coiOtnFarEndCurIntervalType.
coiOtnNearEndIntervalTable: This table contains historical cumulative OTN (G.709) PM stats for the near end of interfaces of ifType opticalChannel(195), for the interval type identified by the index coiOtnNearEndIntervalType and the interval number as identified by the index coiOtnN ...
coiOtnNearEndIntervalEntry: An entry containing management information on near end error/statistics counters such as Failure Counts, Errored Seconds...etc in the given interval.
coiOtnNearEndIntervalType: This object gives the interval type during which the performance statistics are accumulated.
coiOtnNearEndIntervalMonType: This object gives the part of optical network for which near end OTN performance statistics are being monitored.
coiOtnNearEndIntervalNum: This object identifies the interval for which the set of near end OTN performance values is available. The interval identified by 1 is the most recent 15 minute or 24 hour interval, and the interval identified by N is the interval immediately preceding th ...
coiOtnNearEndIntervalFCs: The counter associated with the number of failures encountered on the near end of interface in the interval identified by coiOtnNearEndIntervalType and coiOtnNearEndIntervalNum.
coiOtnNearEndIntervalESs: The counter associated with the number of Errored Seconds encountered on the near end of interface in the interval identified by coiOtnNearEndIntervalType and coiOtnNearEndIntervalNum.
coiOtnNearEndIntervalSESs: The counter associated with the number of Severely Errored Seconds encountered on the near end of interface in the interval identified by coiOtnNearEndIntervalType and coiOtnNearEndIntervalNum.
coiOtnNearEndIntervalUASs: The counter associated with the number of Unavailable Seconds encountered on the near end of interface in the interval identified by coiOtnNearEndIntervalType and coiOtnNearEndIntervalNum.
coiOtnNearEndIntervalBBEs: The counter associated with the number of Background Block Errors encountered on the near end of interface in the interval identified by coiOtnNearEndIntervalType and coiOtnNearEndIntervalNum.
coiOtnNearEndIntervalESRs: The counter associated with the Errored Seconds Ratio on the near end of interface in the interval identified by coiiOtnNearEndIntervalType and coiOtnNearEndIntervalNum.
coiOtnNearEndIntervalSESRs: The counter associated with the Severely Errored Seconds ratio on the near end of interface in the interval identified by coiOtnNearEndIntervalType and coiOtnNearEndIntervalNum.
coiOtnNearEndIntervalBBERs: The counter associated with the Background Block Errors ratio on the near end of interface in the interval identified by coiOtnNearEndIntervalType and coiOtnNearEndIntervalNum.
coiOtnNearEndIntervalValidData: This variable indicates if the data for the interval identified by coiOtnNearEndIntervalType and coiOtnNearEndIntervalNum is valid.
coiOtnFarEndIntervalTable: This table contains historical cumulative OTN (G.709) PM stats for the far end interfaces of ifType opticalChannel(195), for the interval type identified by the index coiOtnFarEndIntervalType and the interval number as identified by coiOtnFarEndIntervalNu ...
coiOtnFarEndIntervalEntry: An entry containing managment information on far end error/statistics counters such as Failure Counts, Errored Seconds...etc in the given interval
coiOtnFarEndIntervalType: This object gives the interval type during which the far end performance statistics are accumulated.
coiOtnFarEndIntervalMonType: This object gives the part of optical network for which far end OTN performance statistics are being monitored.
coiOtnFarEndIntervalNum: This object identifies the interval for which the set of far end OTN performance values for this interface is available. The interval identified by 1 is the most recent 15 minute or 24 hour interval, and the interval identified by N is the interval immedi ...
coiOtnFarEndIntervalFCs: The counter associated with the number of Failures encountered on the far end of interface in the interval identified by coiOtnFarEndIntervalType and coiOtnFarEndIntervalNum.
coiOtnFarEndIntervalESs: The counter associated with the number of Errored Seconds encountered on far end of interface in the interval identified by coiOtnFarEndIntervalType and coiOtnFarEndIntervalNum.
coiOtnFarEndIntervalSESs: The counter associated with the number of Severely Errored Seconds encountered on far end interface in the interval identified by coiOtnFarEndIntervalType and coiOtnFarEndIntervalNum.
coiOtnFarEndIntervalUASs: The counter associated with the number of Unavailable Seconds encountered on far end of interface in the interval identified by coiOtnFarEndIntervalType and coiOtnFarEndIntervalNum.
coiOtnFarEndIntervalBBEs: The counter associated with the number of Background Block Errors encountered on far end of interface in the interval identified by coiOtnFarEndIntervalType and coiOtnFarEndIntervalNum.
coiOtnFarEndIntervalESRs: The counter associated with the Errored Seconds Ratio on far end of interface in the interval identified by coiOtnFarEndIntervalType and coiOtnFarEndIntervalNum.
coiOtnFarEndIntervalSESRs: The counter associated with the Severely Errored Seconds ratio on far end of interface in the interval identified by coiOtnFarEndIntervalType and coiOtnFarEndIntervalNum.
coiOtnFarEndIntervalBBERs: The counter associated with the Background Block Errors ratio on far end of interface in the interval identified by coiOtnFarEndIntervalType and coiOtnFarEndIntervalNum.
coiOtnFarEndIntervalValidData: This variable indicates if the far end data for the interval identified by coiOtnFarEndIntervalType and coiOtnFarEndIntervalNum is valid.
coiFECThresholdsTable: This table contains the configurable thresholds for FEC ( Forward Error Correction ) statistics.
coiFECThresholdsEntry: An entry containing management information for configuration of FEC thresholds. Entries can be created for ifIndices with an ifType of opticalChannel(195). Thresholds are created/destroyed, through the entry's RowStatus object semantics. The coiFECThreshI ...
coiFECThreshIntervalType: This object gives the type of the interval for which the thresholds are being set.
coiFECThreshType: This object gives the type of the FEC Threshold that is being set. Valid values are - bitErrCor(1) : Bit Errors Corrected byteErrcor(2) : Byte Errors Corrected zeroErrDet(3) : Zero Bit Errors Detected oneErrDet(4) : One Bit Errors Detected unCor ...
coiFECThreshValue: This object is used for configuring the FEC threshold value for the given threshold type.
coiFECThreshStorageType: The storage type for this conceptual row.
coiFECThreshStatus: This object controls the creation and deletion of a conceptual row in this table.The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on w ...
coiFECCurrentTable: This table contains the cumulative FEC PM stats for the interfaces of ifType opticalChannel(195) for the current interval of interval type identified coiFECCurIntervalType.
coiFECCurrentEntry: An entry containing managment information on FEC related error/statistics counters such as Bit Errors Corrected, Byte Errors Corrected etc in the current interval.
coiFECCurIntervalType: This object gives the interval type during which the FEC PM statistics have been collected.
coiFECCurrentCorBitErrs: The counter associated with the number of Bit Errors Corrected on this interface in the current interval of type coiFECCurIntervalType.
coiFECCurrentCorByteErrs: The counter associated with the number of Byte Errors Corrected on this interface in the current interval of type coiFECCurIntervalType.
coiFECCurrentDetZeroErrs: The counter associated with the number of zero bit errors detected on this interface in the current interval of type coiFECCurIntervalType.
coiFECCurrentDetOneErrs: The counter associated with the number of one bit errors detected on this interface in the current interval of type coiFECCurIntervalType.
coiFECCurrentUncorWords: The counter associated with the number of Uncorrectable Words encountered on this interface in the current interval of type coiFECCurIntervalType.
coiFECIntervalTable: This table contains historical cumulative FEC PM stats for the interfaces of ifType opticalChannel(195), for the interval type identified by the index coiFECIntervalType and the interval number as identified by index coiFECIntervalNum. The PM statistics i ...
coiFECIntervalEntry: An entry containing managment information on FEC error/statistics counters such as Bit Errors Corrected, Byte Errors Corrected etc in the given interval.
coiFECIntervalType: This object gives the type of interval for which the FEC values have been collected.
coiFECIntervalNum: This object gives the interval for which the set of FEC PM values are available. The interval identified by 1 is the most recent 15 minute or 24 hour interval, and the interval identified by N is the interval immediately preceding the one identified by N- ...
coiFECIntervalCorBitErrs: The counter associated with the number of Bit Errors Corrected in the interval identified by coiFECIntervalType and coiFECIntervalNum.
coiFECIntervalCorByteErrs: The counter associated with the number of Byte Errors Corrected on this interface in the interval identified by coiFECIntervalType and coiFECIntervalNum.
coiFECIntervalDetZeroErrs: The counter associated with the number of zero bit errors detected on this interface in the interval identified by coiFECIntervalType and coiFECIntervalNum.
coiFECIntervalDetOneErrs: The counter associated with the number of one bit errors detected on this interface in the interval identified by coiFECIntervalType and coiFECIntervalNum.
coiFECIntervalUncorWords: The counter associated with the number of Uncorrectable Words encountered on this interface in the interval identified by coiFECIntervalType and coiFECIntervalNum.
coiFECIntervalValidData: This object indicates whether the data for the interval identified by coiFECIntervalType and coiFECIntervalNum is valid.
coiIfControllerGroup: The collection of objects to allow configurations and give information related to the physical layer characteristics for interfaces of ifType opticalChannel(195).
coiIfOtnNearEndCurrentGroup: The collection of objects used for monitoring the near end OTN error counters in the current interval.
coiIfOtnNearEndIntervalGroup: The collection of objects used for monitoring the near end OTN error counters in a given interval.
coiIfOtnFarEndCurrentGroup: The collection of objects used for monitoring the far end OTN error counters in the current interval.
coiIfOtnFarEndIntervalGroup: The collection of objects used for monitoring the far end OTN error counters in a given interval.
coiIfOtnGroup: The collection of objects used for monitoring the OTN error counters.
coiIfFECGroup: The collection objects used for monitoring the FEC error counters.
coiIfFECCurrentGroup: The collection of objects used for monitoring the FEC error counters in the current interval.
coiIfFECIntervalGroup: The collection of objects used for monitoring the FEC error counters in a given interval .

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list