DS1-MIB Download

dsx1ConfigTable

The DS1 Configuration table.

dsx1ConfigEntry

An entry in the DS1 Configuration table.

dsx1LineIndex

This object should be made equal to ifIndex. The next paragraph describes its previous usage. Making the object equal to ifIndex allows proper use of ifStackTable and ds0/ds0bundle mibs. Previously, this object is the identifier of a DS1 Interface on a m ...

dsx1IfIndex

This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213).

dsx1TimeElapsed

The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will re ...

dsx1ValidIntervals

The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the i ...

dsx1LineType

This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The ...

dsx1LineCoding

This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. dsx1JBZS refers the Jammed Bit Zero Suppression, in which the AT&T specification of at least one pulse every 8 bit ...

dsx1SendCode

This variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the interface to send the code requested. The values mean: dsx1SendNoCode sending looped or normal data dsx1SendLineCode sending ...

dsx1CircuitIdentifier

This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.

dsx1LoopbackConfig

This variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in response to a requested loopback state that the interface does not support. The values mean: dsx1NoL ...

dsx1LineStatus

This variable indicates the Line Status of the interface. It contains loopback, failure, received 'alarm' and transmitted 'alarms information. The dsx1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) an ...

dsx1SignalMode

'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that DS1 Robbed Bit Sig- naling is in use. 'bitOriented' indicates that E1 Channel Asso- ciated Signaling is in use. 'messageOriented' indicates that Common ...

dsx1TransmitClockSource

The source of Transmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used or when an external clock is attached to the box containing the interface. 'th ...

dsx1Fdl

This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties. Set any bits that are appropriate: other(1), dsx1AnsiT1403(2), dsx1Att54016(4), dsx1FdlNone(8) 'other' indicates that a protocol other than one followi ...

dsx1InvalidIntervals

The number of intervals in the range from 0 to dsx1ValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).

dsx1LineLength

The length of the ds1 line in meters. This objects provides information for line build out circuitry. This object is only useful if the interface has configurable line build out circuitry.

dsx1LineStatusLastChange

The value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.

dsx1LineStatusChangeTrapEnable

Indicates whether dsx1LineStatusChange traps should be generated for this interface.

dsx1LoopbackStatus

This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end. The dsx1LoopbackStatus is a bit map represented as a sum, therefore is can re ...

dsx1Ds1ChannelNumber

This variable represents the channel number of the DS1/E1 on its parent Ds2/E2 or DS3/E3. A value of 0 indicated this DS1/E1 does not have a parent DS3/E3.

dsx1Channelization

Indicates whether this ds1/e1 is channelized or unchannelized. The value of enabledDs0 indicates that this is a DS1 channelized into DS0s. The value of enabledDs1 indicated that this is a DS2 channelized into DS1s. Setting this value will cause the cre ...

dsx1CurrentTable

The DS1 current table contains various statistics being collected for the current 15 minute interval.

dsx1CurrentEntry

An entry in the DS1 Current table.

dsx1CurrentIndex

The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.

dsx1CurrentESs

The number of Errored Seconds.

dsx1CurrentSESs

The number of Severely Errored Seconds.

dsx1CurrentSEFSs

The number of Severely Errored Framing Seconds.

dsx1CurrentUASs

The number of Unavailable Seconds.

dsx1CurrentCSSs

The number of Controlled Slip Seconds.

dsx1CurrentPCVs

The number of Path Coding Violations.

dsx1CurrentLESs

The number of Line Errored Seconds.

dsx1CurrentBESs

The number of Bursty Errored Seconds.

dsx1CurrentDMs

The number of Degraded Minutes.

dsx1CurrentLCVs

The number of Line Code Violations (LCVs).

dsx1IntervalTable

The DS1 Interval Table contains various statistics collected by each DS1 Interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identifi ...

dsx1IntervalEntry

An entry in the DS1 Interval table.

dsx1IntervalIndex

The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.

dsx1IntervalNumber

A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.

dsx1IntervalESs

The number of Errored Seconds.

dsx1IntervalSESs

The number of Severely Errored Seconds.

dsx1IntervalSEFSs

The number of Severely Errored Framing Seconds.

dsx1IntervalUASs

The number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.

dsx1IntervalCSSs

The number of Controlled Slip Seconds.

dsx1IntervalPCVs

The number of Path Coding Violations.

dsx1IntervalLESs

The number of Line Errored Seconds.

dsx1IntervalBESs

The number of Bursty Errored Seconds.

dsx1IntervalDMs

The number of Degraded Minutes.

dsx1IntervalLCVs

The number of Line Code Violations.

dsx1IntervalValidData

This variable indicates if the data for this interval is valid.

dsx1TotalTable

The DS1 Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval.

dsx1TotalEntry

An entry in the DS1 Total table.

dsx1TotalIndex

The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.

dsx1TotalESs

The sum of Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1TotalSESs

The number of Severely Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1TotalSEFSs

The number of Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1TotalUASs

The number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1TotalCSSs

The number of Controlled Slip Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1TotalPCVs

The number of Path Coding Violations encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1TotalLESs

The number of Line Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1TotalBESs

The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1TotalDMs

The number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1TotalLCVs

The number of Line Code Violations (LCVs) encountered by a DS1 interface in the current 15 minute interval. Invalid 15 minute intervals count as 0.

dsx1ChanMappingTable

The DS1 Channel Mapping table. This table maps a DS1 channel number on a particular DS3 into an ifIndex. In the presence of DS2s, this table can be used to map a DS2 channel number on a DS3 into an ifIndex, or used to map a DS1 channel number on a DS2 o ...

dsx1ChanMappingEntry

An entry in the DS1 Channel Mapping table. There is an entry in this table corresponding to each ds1 ifEntry within any interface that is channelized to the individual ds1 ifEntry level. This table is intended to facilitate mapping from channelized inter ...

dsx1ChanMappedIfIndex

This object indicates the ifIndex value assigned by the agent for the individual ds1 ifEntry that corresponds to the given DS1 channel number (specified by the INDEX element dsx1Ds1ChannelNumber) of the given channelized interface (specified by INDEX elem ...

dsx1FarEndCurrentTable

The DS1 Far End Current table contains various statistics being collected for the current 15 minute interval. The statistics are collected from the far end messages on the Facilities Data Link. The definitions are the same as described for the near-end ...

dsx1FarEndCurrentEntry

An entry in the DS1 Far End Current table.

dsx1FarEndCurrentIndex

The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of dsx1LineIndex.

dsx1FarEndTimeElapsed

The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will retu ...

dsx1FarEndValidIntervals

The number of previous far end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute far end intervals since the int ...

dsx1FarEndCurrentESs

The number of Far End Errored Seconds.

dsx1FarEndCurrentSESs

The number of Far End Severely Errored Seconds.

dsx1FarEndCurrentSEFSs

The number of Far End Severely Errored Framing Seconds.

dsx1FarEndCurrentUASs

The number of Unavailable Seconds.

dsx1FarEndCurrentCSSs

The number of Far End Controlled Slip Seconds.

dsx1FarEndCurrentLESs

The number of Far End Line Errored Seconds.

dsx1FarEndCurrentPCVs

The number of Far End Path Coding Violations.

dsx1FarEndCurrentBESs

The number of Far End Bursty Errored Seconds.

dsx1FarEndCurrentDMs

The number of Far End Degraded Minutes.

dsx1FarEndInvalidIntervals

The number of intervals in the range from 0 to dsx1FarEndValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).

dsx1FarEndIntervalTable

The DS1 Far End Interval Table contains various statistics collected by each DS1 interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (i ...

dsx1FarEndIntervalEntry

An entry in the DS1 Far End Interval table.

dsx1FarEndIntervalIndex

The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of dsx1LineIndex.

dsx1FarEndIntervalNumber

A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.

dsx1FarEndIntervalESs

The number of Far End Errored Seconds.

dsx1FarEndIntervalSESs

The number of Far End Severely Errored Seconds.

dsx1FarEndIntervalSEFSs

The number of Far End Severely Errored Framing Seconds.

dsx1FarEndIntervalUASs

The number of Unavailable Seconds.

dsx1FarEndIntervalCSSs

The number of Far End Controlled Slip Seconds.

dsx1FarEndIntervalLESs

The number of Far End Line Errored Seconds.

dsx1FarEndIntervalPCVs

The number of Far End Path Coding Violations.

dsx1FarEndIntervalBESs

The number of Far End Bursty Errored Seconds.

dsx1FarEndIntervalDMs

The number of Far End Degraded Minutes.

dsx1FarEndIntervalValidData

This variable indicates if the data for this interval is valid.

dsx1FarEndTotalTable

The DS1 Far End Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval.

dsx1FarEndTotalEntry

An entry in the DS1 Far End Total table.

dsx1FarEndTotalIndex

The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of dsx1LineIndex.

dsx1FarEndTotalESs

The number of Far End Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1FarEndTotalSESs

The number of Far End Severely Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1FarEndTotalSEFSs

The number of Far End Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1FarEndTotalUASs

The number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1FarEndTotalCSSs

The number of Far End Controlled Slip Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1FarEndTotalLESs

The number of Far End Line Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1FarEndTotalPCVs

The number of Far End Path Coding Violations reported via the far end block error count encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1FarEndTotalBESs

The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1FarEndTotalDMs

The number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

dsx1FracTable

This table is deprecated in favour of using ifStackTable. The table was mandatory for systems dividing a DS1 into channels containing different data streams that are of local interest. Systems which are indifferent to data content, such as CSUs, need not ...

dsx1FracEntry

An entry in the DS1 Fractional table.

dsx1FracIndex

The index value which uniquely identifies the DS1 interface to which this entry is applicable The interface identified by a particular value of this index is the same interface as identified by the same value an dsx1LineIndex object instance.

dsx1FracNumber

The channel number for this entry.

dsx1FracIfIndex

An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value an ifIndex object instance. If no interface is currently using a channel, the value ...

ds1NearEndConfigGroup

A collection of objects providing configuration information applicable to all DS1 interfaces.

ds1NearEndStatisticsGroup

A collection of objects providing statistics information applicable to all DS1 interfaces.

ds1FarEndGroup

A collection of objects providing remote configuration and statistics information.

ds1DeprecatedGroup

A collection of obsolete objects that may be implemented for backwards compatibility.

ds1NearEndOptionalConfigGroup

A collection of objects that may be implemented on DS1 and DS2 interfaces.

ds1DS2Group

A collection of objects providing information about DS2 (6,312 kbps) and E2 (8,448 kbps) systems.

ds1TransStatsGroup

A collection of objects which are the statistics which can be collected from a ds1 interface that is running transparent or unframed lineType. Statistics not in this list should return noSuchInstance.

ds1ChanMappingGroup

A collection of objects that give an mapping of DS3 Channel (ds1ChannelNumber) to ifIndex.