HUAWEI-LswINF-MIB

HUAWEI-LswINF-MIB Download

MIBs list

IPHost Network Monitor offer an easy way of SNMP monitoring your Huawei Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for HUAWEI-LswINF-MIB

hwifXXTable
Extended Huawei private interface information table.
hwifXXEntry
Entries of extended Huawei private interface information table.
hwifUnBoundPort
Whether it is the unbound port (true indicates that the port is the main port of the aggregation or the port does not participate in the aggregation)
hwifISPhyPort
Whether it is a physical interface
hwifAggregatePort
in the aggregation, this value is true.)
hwifMirrorPort
Whether it is a mirror port.
hwifVLANType
port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.
hwifMcastControl
Broadcast storm suppression with the step length of 1, ranging from 1 to 100 percent. In some products the step is 5, ranging from 5 to 100.
hwifFlowControl
Flow control status
hwifSrcMacControl
Whether to filter by source MAC address.
hwifClearStat
Clear all port statistics. Read operation not supported.
hwifXXBasePortIndex
number on the equipment.
hwifXXDevPortIndex
index number.
hwifPpsMcastControl
The broadcast suppression with pps(packet per second) type. The max value is determined by the port type and product.
hwifPpsBcastDisValControl
Control the port's pps(packet per second) broadcast suppression. When the port is enabled, its pps broadcast suppression value is the global disperse value, and when disabled, it doesn't suppress broadcast.
hwifUniSuppressionStep
The step of unicast suppression in ratio mode.
hwifPpsUniSuppressionMax
in pps mode.
hwifMulSuppressionStep
The step of multicast suppression in ratio mode.
hwifPpsMulSuppressionMax
in pps mode.
hwifUniSuppression
The unicast suppression with the ranging from 1 to 100 percent in ratio mode. The step is determined by hwifUniSuppressionStep.
hwifPpsUniSuppression
The unicast suppression in pps(packet per second) mode. The max value is determined by hwifPpsUniSuppressionMax.
hwifMulSuppression
The multicast suppression with ranging from 1 to 100 percent in ratio mode. The step is determined by hwifMulSuppressionStep.
hwifPpsMulSuppression
The multicast suppression in pps(packet per second) mode. The max pps value is determined by hwifPpsMulSuppressionMax
hwifComboActivePort
Active port on combo interface.
hwifBMbpsMulSuppressionMax
The maximum value of the multicast suppression with bandwidth-based(Mbps) that a port can be configured. ::= { hwifXXEntry 23 } SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION With bandwidth-based multicast suppression, the bandwidth is ...
hwifUnknownPacketDropUni
inbound direction is enabled on this port, the port will drop unknown-unicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-unicast packets in outbound direction. When both directions are enabled ...
hwifAggregateTable
Port aggregation information table.
hwifAggregateEntry
Port aggregation information table.
hwifAggregatePortIndex
Index number of the main aggregated port.
hwifAggregatePortName
Aggregation group name.
hwifAggregatePortListPorts
Portlist of a aggregating.
hwifAggregateModel
Load sharing mode for the port aggregation.
hwifAggregateOperStatus
Current operation status of the row.
hwifHybridPortTable
Hybrid-port configuration table.
hwifHybridPortEntry
Hybrid-port configuration table.
hwifHybridPortIndex
Index number of Hybrid-port.
hwifHybridTaggedVlanListLow
the Hybrid-port.
hwifHybridTaggedVlanListHigh
the Hybrid-port.
hwifHybridUnTaggedVlanListLow
the Hybrid-port.
hwifHybridUnTaggedVlanListHigh
on the Hybrid-port.
hwSlotPortMax
Max ports of the slots.
hwSwitchPortMax
Max ports that this switch includes.
hwifVLANTrunkStatusTable
Gvrp attributes on the VlanTrunk port
hwifVLANTrunkStatusEntry
Gvrp attributes on the VlanTrunk port.
hwifVLANTrunkIndex
Index number of the VLANTrunk interface.
hwifVLANTrunkGvrpRegistration
GVRP registration information normal: This is the default configuration. Allow create, register and unregister vlans dynamiclly at this port. fixed: Aallow create and register vlan manually at this port. Prevent from unregistering vlans or regist ...
hwifVLANTrunkPassListLow
VLANs actually carried by the VLAN port. The lowest number of VLANs: 2048 (1 to 2048), and the length is 256.
hwifVLANTrunkPassListHigh
VLANs actually carried by the VLAN port. The highest number of VLANs: 2046(2049 to 4094), and the length is 256.
hwifVLANTrunkAllowListLow
VLANs allowed by the VLAN port. The lowest number of VLANs: 2048 (1 to 2048), and the length is 256.
hwifVLANTrunkAllowListHigh
VLANs allowed by the VLAN port. The highest number of VLANs: 2046 (2049 to 4094), and the length is 256.
hwethernetTable
Ethernet port attribute table.
hwethernetEntry
Entries of Ethernet port attribute table
hwifEthernetDuplex
Ethernet interface mode.
hwifEthernetMTU
MTU on the Ethernet interface.
hwifEthernetSpeed
Ethernet interface speed.
hwifEthernetMdi
Type of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3
hwMaxMacLearn
The maximum number of MAC addresses that the port can learn.
hwifMacAddressLearn
This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set.
hwifEthernetTest
Test this interface. The actual testing will be different according to products. Read operation not supported.
hwifMacAddrLearnMode
Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning.
hwifEthernetFlowInterval
Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5. ::= { hwethernetEntry 12 } SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION Isolate group means that all ports in the same isolate group ...
hwifVlanVPNStatus
Vlan VPN enable status.
hwifVlanVPNUplinkStatus
Vlan VPN uplink status.
hwifVlanVPNTPID
Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hwVlanVPNTPIDMode to get more information.
hwifIsolateGroupID
Isolate group identifier. Value zero means this interface does not belong to any isolate group.
hwifisUplinkPort
Ethernet uplink status, default value is 2.
hwIsolateGroupMax
Max isolate group that this device support, the value is zero means that the device does not support isolate group.
hwGlobalBroadcastMaxPps
The global max packets per second. When it is set, the value of BroadcastMaxPps in all ports will be changed to that setting.
hwGlobalBroadcastMaxRatio
The global max-ratio of broadcast from 0 to 100 percent. When it is set, the value of BroadcastMaxRatio in all ports will be changed to that setting.
hwBpduTunnelStatus
Bpdu tunnel enable status.
hwVlanVPNTPIDMode
Vlan VPN TPID mode. The value 'port-based' means VLAN VPN TPID value would be set based on port via hwifVlanVPNTPID. In this situation, hwVlanVPNTPID is meaningless and always return 0x8100. The value 'global' means VLAN VPN TPID value should be set globa ...
hwVlanVPNTPID
Global Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100.
hwPortIsolateGroupTable
Isolate Group attribute table.
hwPortIsolateGroupEntry
The entry of hwPortIsolateGroupTable.
hwPortIsolateGroupIndex
Port isolate group identifier. The index of the hwPortIsolateGroupTable. The value ranges from 1 to the limit of isolate group quantity.
hwPortIsolateUplinkIfIndex
Index number of the uplink interface.
hwPortIsolateGroupRowStatus
Current operation status of the row.
hwPortIsolateGroupDescription
Port isolate group description, default value is zero-length string.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list