HUAWEI-LswVLAN-MIB Download
IPHost Network Monitor offer an easy way of SNMP monitoring your Huawei Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for HUAWEI-LswVLAN-MIB
- hwdot1qVlanMIBTable
- VLAN MIB table
- hwdot1qVlanMIBEntry
- Entries of VLAN MIB table
- hwdot1qVlanIndex
- The VLAN-ID
- hwdot1qVlanName
- Name of the VLAN
- hwdot1qVlanPorts
- Port list of the VLAN
- hwdot1qVlanType
- vlan types:SuperVlan(1), Common vlan(2), and Sub-vlan(3)
- hwdot1qVlanMacFilter
- Whether to filter MAC addresses
- hwdot1qVlanMcastUnknownProtos
- Whether to broadcast the unknown packets
- hwExistInterface
- Whether there is virtual interface
- hwVlanInterfaceIndex
- the value of the node is vlan id, else the value is 0.
- hwdot1qVlanMacLearn
- MAC address learning identity (common vlan/Sub-vlan)
- hwdot1qVlanStatus
- Status of the VLAN
- hwdot1qVlanCreationTime
- sysUPTime when the VLAN is created
- hwdot1qVlanPriority
- Priority of the VLAN
- hwdot1qVlanRowStatus
- Operation status
- hwdot1qVlanBroadcastSuppression
- If the device doesn't support broadcast control by vlan, then set operation of this node will be responsed with fault, but with 100 for read operation.The default value is 100, i.e no broadcast control. But to device which doesn't support, this value has ...
- hwdot1qVlanBcastSuppressionPPS
- exerted. This mode conflictes with hwdot1qVlanBroadcastSuppression. If the mode is set, hwdot1qVlanBroadcastSuppression is unavailable. And vice versa.
- hwdot1qVlanMulticast
- Multicast vlan. The default value is disable(0).
- hwVlanInterfaceTable
- Virtual interface configuration table
- hwVlanInterfaceEntry
- Entries of virtual interface configuration table
- hwVlanInterfaceID
- Index of VLAN virtual interfaces
- hwdot1qVlanID
- VLANID
- hwdot1qVlanIpAddress
- IP address of interface
- hwdot1qVlanIpAddressMask
- IP address mask of interface
- hwVlanInterfaceAdminStatus
- Status of VLAN virtual interfaces
- hwVlanInterfaceFrameType
- Frame type accepted by VLAN virtual interfaces
- hwInterfaceRowStatus
- Operation status
- hwVlanInterfaceIpMethod
- vlan interface ip address acquiring method which is manual, dhcp or bootp
- hwifIsolateMappingTable
- Secondary vlan lists of Isolate-VLANs
- hwifIsolateMappingEntry
- Secondary vlan lists of Isolate-VLANs
- hwifIsolatePrimaryVlanID
- Primary VLAN ID
- hwifIsolateSecondaryVlanlistLow
- The lowest possible value of the list of the secondary VLANs to be added to the Isolate-VLAN
- hwifIsolateSecondaryVlanlistHigh
- The highest possible value of the list of the secondary VLANs to be added to the Isolate-VLAN
- hwVlanInterfaceAddrTable
- VLAN interface IP address configuration table
- hwVlanInterfaceAddrEntry
- Entries of VLAN interface IP address configuration table
- hwVlanInterfaceIpIfIndex
- Index of VLAN interfaces
- hwVlanInterfaceIpAddr
- you could set it zero to destory all IP addresses(but cluster IP address) in this VLAN interface.
- hwVlanInterfaceIpMask
- you must set it correct to relative IP address
- hwVlanInterfaceIpType
- GET NEXT operation. primary(1) is optional when taking SET primary IP address operation
- hwVlanInterfaceIpRowStatus
- GET NEXT operation. createAndGo(4) and destory(6) is valid when taking SET operation
- hwdot1qVlanBatchMIBTable
- VLAN batch creation configuration table.
- hwDot1qVlanBatchMIBEntry
- VLAN batch creation configuration entry.
- hwdot1qVlanBatchOperIndex
- The consequence of operation.
- hwdot1qVlanBatchStartIndex
- The value of start VLAN-ID.
- hwdot1qVlanBatchEndIndex
- The value of end VLAN-ID.
- hwdot1qVlanBatchOperStatus
- The status of operation.
- hwdot1qVlanBatchRowStatus
- The row status of HwDot1qVlanBatchMIBEntry.
- hwLswVlanProtoObject
- Description.
- hwVLANMibGarpLeaveAllTime
- The GARP LeaveAll time, in centiseconds.
- hwvLANMibSwitchCountTable
- A table containing the information various statistics of switch
- hwvLANMibSwitchCountEntry
- A table containing the information various statistics of switch
- hwVLANMibSwitchGMRPRXPkt
- 1. Number of GMRP frames received
- hwVLANMibSwitchGVRPRXPkt
- 2. Number of GVRP frames received
- hwVLANMibSwitchGMRPTXPkt
- 3. Number of GMRP frames transmitted
- hwVLANMibSwitchGVRPTXPkt
- 4. Number of GVRP frames transmitted
- hwVLANMibSwitchDiscardedPkt
- Number of discarded frames
- hwVLANMibSwitchGarpStatClear
- Clear various Statistics viz. read operation not supported.
- hwvLANMibHoldTimeTable
- A table for setting/getting the Hold Time for a particular port
- hwvLANMibHoldTimeEntry
- A table for setting/getting the Hold Time for a particular port
- hwVLANMibHoldTime
- HoldTime of the port
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
