HW-IMAPV1NORTHBOUND-TRAP-MIB Download
IPHost Network Monitor offer an easy way of SNMP monitoring your Huawei Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for HW-IMAPV1NORTHBOUND-TRAP-MIB
- thirdNMSFaultFilter
- This is to add the filter condition by the upper NMS the syntax is IP:Port:Alarm Level Example : 127.0.0.1:161:0011 In this IP is 127.0.0.1 Port is 161 Alarm Level - Minor and warning should not be sent as the bit is set for them
- hwNmNorthboundNEName
- The name of network element,string (255)
- hwNmNorthboundNEType
- Device type of element,string(64)
- hwNmNorthboundObjectInstance
- Instance of element,such as number of Rack, Frame, Slot, Subslot, Port and so on,string(255)
- hwNmNorthboundEventType
- Event type of Network management,string(64)
- hwNmNorthboundEventTime
- Alarm generate time,string(64),format: 2003/03/14 00:00:00
- hwNmNorthboundProbableCause
- Reason of Probable caused alarm, string(64)
- hwNmNorthboundSeverity
- Level of Alarm, string(64)
- hwNmNorthboundEventDetail
- Alarm ID and detail information, format: ID+detail infomation, string(255)
- hwNmNorthboundAdditionalInfo
- Additional infomation of device, such as Country, City and so on, string(255)
- hwNmNorthboundFaultFlag
- The flag of the fault.Show whether the alarm is an event ,a fault alarm or a recovery alarm.
- hwNmNorthboundFaultFunction
- The function type of the alarm.It can be one of these values:'Power','Environment','Signal','Relay','Hardware','Software','Run','Communication','Service','Processerror','UNKNOWN_FUC_TYPE'
- hwNmNorthboundDeviceIP
- The IP address of the device
- hwNmNorthboundSerialNo
- The serial number of alarm.
- hwNmNorthboundProbableRepair
- The probable repair advice of the alarm.
- hwNmNorthboundResourceIDs
- The ID of the resource.
- hwNmNorthboundsAdditionalVB1
- Addtional information of the alarm
- hwNmNorthboundsAdditionalVB2
- Addtional information of the alarm
- hwNmNorthboundsAdditionalVB3
- Addtional information of the alarm
- hwNmNorthboundsAdditionalVB4
- Addtional information of the alarm
- hwNmNorthboundsAdditionalVB5
- Addtional information of the alarm
- hwNmNorthboundsAdditionalVB6
- Addtional information of the alarm
- hwNmNorthboundsAdditionalVB7
- Addtional information of the alarm
- hwNmNorthboundsAdditionalVB8
- Addtional information of the alarm
- hwNmNorthboundEventName
- The name of event,string (255)
- hwNmNorthboundEventSynchronizationEndStatus
- It shows the result of alarm synchronization. 1 means the alarm synchronization successfully ended. 2 means the alarm synchronization is stopped by the NMS's command. 3 means some error occured during the alarm synchronization.
- hwNmNorthboundEventSynchronizationEndStatusDetail
- The detail description of the alarm synchronization end status.
- hwNmNorthboundEventSynchronizationCommandStart
- This node is to be set to start the alarm synchronization. It should be set as 'NMS's IP:port',and the agent will send alarm synchronization result to the IP and port specified. If there is already an running alarm synchronization for that IP and port,it ...
- hwNmNorthboundEventSynchronizationCommandStop
- This node is to be set to stop the alarm synchronization. It should be set as 'NMS's IP:port',and the agent will stop alarm synchronization for the IP and port specified. If there is no such an running alarm synchronization for that IP and port,it will re ...
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
