LLDP-MIB Download

lldpMessageTxInterval

The interval at which LLDP frames are transmitted on behalf of this LLDP agent. The default value for lldpMessageTxInterval object is 30 seconds. The value of this object must be restored from non-volatile storage after a re-initialization of the manageme ...

lldpMessageTxHoldMultiplier

The time-to-live value expressed as a multiple of the lldpMessageTxInterval object. The actual time-to-live value used in LLDP frames, transmitted on behalf of this LLDP agent, can be expressed by the following formula: TTL = min(65535, (lldpMessageTxInt ...

lldpReinitDelay

The lldpReinitDelay indicates the delay (in units of seconds) from when lldpPortConfigAdminStatus object of a particular port becomes 'disabled' until re-initialization will be attempted. The default value for lldpReintDelay object is two seconds. The val ...

lldpTxDelay

The lldpTxDelay indicates the delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB. The recommended value for the lldpTxDelay is set by the following formula: 1 <= lldpTx ...

lldpNotificationInterval

This object controls the transmission of LLDP notifications. the agent must not generate more than one lldpRemTablesChange notification-event in the indicated period, where a 'notification-event' is the transmission of a single notification PDU type to a ...

lldpPortConfigTable

The table that controls LLDP frame transmission on individual ports.

lldpPortConfigEntry

LLDP configuration information for a particular port. This configuration parameter controls the transmission and the reception of LLDP frames on those ports whose rows are created in this table.

lldpPortConfigPortNum

The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpPortConfigTable.

lldpPortConfigAdminStatus

The administratively desired status of the local LLDP agent. If the associated lldpPortConfigAdminStatus object has a value of 'txOnly(1)', then LLDP agent will transmit LLDP frames on this port and it will not store any information about the remote syste ...

lldpPortConfigNotificationEnable

The lldpPortConfigNotificationEnable controls, on a per port basis, whether or not notifications from the agent are enabled. The value true(1) means that notifications are enabled; the value false(2) means that they are not.

lldpPortConfigTLVsTxEnable

The lldpPortConfigTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to a TLV type associated with a specific optional ...

lldpConfigManAddrTable

The table that controls selection of LLDP management address TLV instances to be transmitted on individual ports.

lldpConfigManAddrEntry

LLDP configuration information that specifies the set of ports (represented as a PortList) on which the local system management address instance will be transmitted. This configuration object augments the lldpLocManAddrEntry, therefore it is only present ...

lldpConfigManAddrPortsTxEnable

A set of ports that are identified by a PortList, in which each port is represented as a bit. The corresponding local system management address instance will be transmitted on the member ports of the lldpManAddrPortsTxEnable. The default value for lldpCo ...

lldpStatsRemTablesLastChangeTime

The value of sysUpTime object (defined in IETF RFC 3418) at the time an entry is created, modified, or deleted in the in tables associated with the lldpRemoteSystemsData objects and all LLDP extension objects associated with remote systems. An NMS can use ...

lldpStatsRemTablesInserts

The number of times the complete set of information advertised by a particular MSAP has been inserted into tables contained in lldpRemoteSystemsData and lldpExtensions objects. The complete set of information received from a particular MSAP should be inse ...

lldpStatsRemTablesDeletes

The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects. This counter should be incremented only once when the complete set of informati ...

lldpStatsRemTablesDrops

The number of times the complete set of information advertised by a particular MSAP could not be entered into tables contained in lldpRemoteSystemsData and lldpExtensions objects because of insufficient resources.

lldpStatsRemTablesAgeouts

The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects because the information timeliness interval has expired. This counter should be ...

lldpStatsTxPortTable

A table containing LLDP transmission statistics for individual ports. Entries are not required to exist in this table while the lldpPortConfigEntry object is equal to 'disabled(4)'.

lldpStatsTxPortEntry

LLDP frame transmission statistics for a particular port. The port must be contained in the same chassis as the LLDP agent. All counter values in a particular entry shall be maintained on a continuing basis and shall not be deleted upon expiration of rxIn ...

lldpStatsTxPortNum

The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpStatsTable.

lldpStatsTxPortFramesTotal

The number of LLDP frames transmitted by this LLDP agent on the indicated port.

lldpStatsRxPortTable

A table containing LLDP reception statistics for individual ports. Entries are not required to exist in this table while the lldpPortConfigEntry object is equal to 'disabled(4)'.

lldpStatsRxPortEntry

LLDP frame reception statistics for a particular port. The port must be contained in the same chassis as the LLDP agent. All counter values in a particular entry shall be maintained on a continuing basis and shall not be deleted upon expiration of rxInfoT ...

lldpStatsRxPortNum

The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpStatsTable.

lldpStatsRxPortFramesDiscardedTotal

The number of LLDP frames received by this LLDP agent on the indicated port, and then discarded for any reason. This counter can provide an indication that LLDP header formating problems may exist with the local LLDP agent in the sending system or that LL ...

lldpStatsRxPortFramesErrors

The number of invalid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.

lldpStatsRxPortFramesTotal

The number of valid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.

lldpStatsRxPortTLVsDiscardedTotal

The number of LLDP TLVs discarded for any reason by this LLDP agent on the indicated port.

lldpStatsRxPortTLVsUnrecognizedTotal

The number of LLDP TLVs received on the given port that are not recognized by this LLDP agent on the indicated port. An unrecognized TLV is referred to as the TLV whose type value is in the range of reserved TLV types (000 1001 - 111 1110) in Table 9.1 of ...

lldpStatsRxPortAgeoutsTotal

The counter that represents the number of age-outs that occurred on a given port. An age-out is the number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpEx ...

lldpLocChassisIdSubtype

The type of encoding used to identify the chassis associated with the local system.

lldpLocChassisId

The string value used to identify the chassis component associated with the local system.

lldpLocSysName

The string value used to identify the system name of the local system. If the local agent supports IETF RFC 3418, lldpLocSysName object should have the same value of sysName object.

lldpLocSysDesc

The string value used to identify the system description of the local system. If the local agent supports IETF RFC 3418, lldpLocSysDesc object should have the same value of sysDesc object.

lldpLocSysCapSupported

The bitmap value used to identify which system capabilities are supported on the local system.

lldpLocSysCapEnabled

The bitmap value used to identify which system capabilities are enabled on the local system.

lldpLocPortTable

This table contains one or more rows per port information associated with the local system known to this agent.

lldpLocPortEntry

Information about a particular port component. Entries may be created and deleted in this table by the agent.

lldpLocPortNum

The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpLocPortTable.

lldpLocPortIdSubtype

The type of port identifier encoding used in the associated 'lldpLocPortId' object.

lldpLocPortId

The string value used to identify the port component associated with a given port in the local system.

lldpLocPortDesc

The string value used to identify the 802 LAN station's port description associated with the local system. If the local agent supports IETF RFC 2863, lldpLocPortDesc object should have the same value of ifDescr object.

lldpLocManAddrTable

This table contains management address information on the local system known to this agent.

lldpLocManAddrEntry

Management address information about a particular chassis component. There may be multiple management addresses configured on the system identified by a particular lldpLocChassisId. Each management address should have distinct 'management address type' ...

lldpLocManAddrSubtype

The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object.

lldpLocManAddr

The string value used to identify the management address component associated with the local system. The purpose of this address is to contact the management entity.

lldpLocManAddrLen

The total length of the management address subtype and the management address fields in LLDPDUs transmitted by the local LLDP agent. The management address length field is needed so that the receiving systems that do not implement SNMP will not be require ...

lldpLocManAddrIfSubtype

The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the local system.

lldpLocManAddrIfId

The integer value used to identify the interface number regarding the management address component associated with the local system.

lldpLocManAddrOID

The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the local system agent.

lldpRemTable

This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpRemEntry is present for each local port, or it may choose to maintain multiple lldpRemEntries for the same local port ...

lldpRemEntry

Information about a particular physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery process is active.

lldpRemTimeMark

A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.

lldpRemLocalPortNum

The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpRemLocalPortNum identifies the port on which the remote system information is received. The value of this object ...

lldpRemIndex

This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, st ...

lldpRemChassisIdSubtype

The type of encoding used to identify the chassis associated with the remote system.

lldpRemChassisId

The string value used to identify the chassis component associated with the remote system.

lldpRemPortIdSubtype

The type of port identifier encoding used in the associated 'lldpRemPortId' object.

lldpRemPortId

The string value used to identify the port component associated with the remote system.

lldpRemPortDesc

The string value used to identify the description of the given port associated with the remote system.

lldpRemSysName

The string value used to identify the system name of the remote system.

lldpRemSysDesc

The string value used to identify the system description of the remote system.

lldpRemSysCapSupported

The bitmap value used to identify which system capabilities are supported on the remote system.

lldpRemSysCapEnabled

The bitmap value used to identify which system capabilities are enabled on the remote system.

lldpRemManAddrTable

This table contains one or more rows per management address information on the remote system learned on a particular port contained in the local chassis known to this agent.

lldpRemManAddrEntry

Management address information about a particular chassis component. There may be multiple management addresses configured on the remote system identified by a particular lldpRemIndex whose information is received on lldpRemLocalPortNum of the local syst ...

lldpRemManAddrSubtype

The type of management address identifier encoding used in the associated 'lldpRemManagmentAddr' object.

lldpRemManAddr

The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity.

lldpRemManAddrIfSubtype

The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the remote system.

lldpRemManAddrIfId

The integer value used to identify the interface number regarding the management address component associated with the remote system.

lldpRemManAddrOID

The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent.

lldpRemUnknownTLVTable

This table contains information about an incoming TLV which is not recognized by the receiving LLDP agent. The TLV may be from a later version of the basic management set. This table should only contain TLVs that are found in a single LLDP frame. Entrie ...

lldpRemUnknownTLVEntry

Information about an unrecognized TLV received from a physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery process is active.

lldpRemUnknownTLVType

This object represents the value extracted from the type field of the TLV.

lldpRemUnknownTLVInfo

This object represents the value extracted from the value field of the TLV.

lldpRemOrgDefInfoTable

This table contains one or more rows per physical network connection which advertises the organizationally defined information. Note that this table contains one or more rows of organizationally defined information that is not recognized by the local agen ...

lldpRemOrgDefInfoEntry

Information about the unrecognized organizationally defined information advertised by the remote system. The lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex, lldpRemOrgDefInfoOUI, lldpRemOrgDefInfoSubtype, and lldpRemOrgDefInfoIndex are indexes to this ...

lldpRemOrgDefInfoOUI

The Organizationally Unique Identifier (OUI), as defined in IEEE std 802-2001, is a 24 bit (three octets) globally unique assigned number referenced by various standards, of the information received from the remote system.

lldpRemOrgDefInfoSubtype

The integer value used to identify the subtype of the organizationally defined information received from the remote system. The subtype value is required to identify different instances of organizationally defined information that could not be retrieved w ...

lldpRemOrgDefInfoIndex

This object represents an arbitrary local integer value used by this agent to identify a particular unrecognized organizationally defined information instance, unique only for the lldpRemOrgDefInfoOUI and lldpRemOrgDefInfoSubtype from the same remote syst ...

lldpRemOrgDefInfo

The string value used to identify the organizationally defined information of the remote system. The encoding for this object should be as defined for SnmpAdminString TC.

lldpConfigGroup

The collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP.

lldpConfigRxGroup

The collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP and have the capability of receiving LLDP frames.

lldpConfigTxGroup

The collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP and have the capability of transmitting LLDP frames.

lldpStatsRxGroup

The collection of objects which are used to represent LLDP reception statistics. This group is mandatory for agents which implement the LLDP and have the capability of receiving LLDP frames.

lldpStatsTxGroup

The collection of objects which are used to represent LLDP transmission statistics. This group is mandatory for agents which implement the LLDP and have the capability of transmitting LLDP frames.

lldpLocSysGroup

The collection of objects which are used to represent LLDP Local System Information. This group is mandatory for agents which implement the LLDP and have the capability of transmitting LLDP frames.

lldpRemSysGroup

The collection of objects which are used to represent LLDP Remote Systems Information. The objects represent the information associated with the basic TLV set. Please note that even the agent doesn't implement some of the optional TLVs, it shall recogni ...