Nortel-Magellan-Passport-DisdnNISMIB Download

dataSigChanNisRowStatusTable

This entry controls the addition and deletion of dataSigChanNis components.

dataSigChanNisRowStatusEntry

A single entry in the table represents a single dataSigChanNis component.

dataSigChanNisRowStatus

This variable is used as the basis for SNMP naming of dataSigChanNis components. These components can be added and deleted.

dataSigChanNisComponentName

This variable provides the component's string name for use with the ASCII Console Interface

dataSigChanNisStorageType

This variable represents the storage type value for the dataSigChanNis tables.

dataSigChanNisIndex

This variable represents the index for the dataSigChanNis tables.

dataSigChanNisL2Table

This group represents the provisionable Layer 2 attributes of the Q931 CCITT protocol.

dataSigChanNisL2Entry

An entry in the dataSigChanNisL2Table.

dataSigChanNisT23

This attribute specifies the layer2 enable request timer.

dataSigChanNisT200

This attribute specifies the maximum time between a layer 2 frame and its acknowledgement

dataSigChanNisN200

This attribute specifies the maximum number of re-transmissions of a layer2 frame.

dataSigChanNisT203

This attribute specifies the maximum time that a no layer 2 traffic situation can last. Expiry triggers a check on whether the far end is a live.

dataSigChanNisN201

This attribute specifies the maximum number of octets in an information field.

dataSigChanNisCircuitSwitchedK

This attribute specifies the maximum number of frames for B channel use.

dataSigChanNisProvTable

This group defines the general options of the d-channel signalling link.

dataSigChanNisProvEntry

An entry in the dataSigChanNisProvTable.

dataSigChanNisSide

This attribute specifies whether the layer 2 HDLC interface is the network or user side of the connection.

dataSigChanNisOperTable

This group provides the operational attributes for the signalling protocol.

dataSigChanNisOperEntry

An entry in the dataSigChanNisOperTable.

dataSigChanNisActiveChannels

This attribute indicates the number of currently active channels. This includes data and voice channels.

dataSigChanNisPeakActiveChannels

This attribute indicates the maximum number of channels that have been active on this signalling channel during the last polling period.

dataSigChanNisDChanStatus

This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is e ...

dataSigChanNisToolsTable

This group contains a series of operational attributes which turn on and off several kinds of tracing.

dataSigChanNisToolsEntry

An entry in the dataSigChanNisToolsTable.

dataSigChanNisTracing

This attribute defines which types of tracing are active for this signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueue attribute in Col/debug must be greater than 0 and a Telnet NMIS session must list ...

dataSigChanNisFramerRowStatusTable

This entry controls the addition and deletion of dataSigChanNisFramer components.

dataSigChanNisFramerRowStatusEntry

A single entry in the table represents a single dataSigChanNisFramer component.

dataSigChanNisFramerRowStatus

This variable is used as the basis for SNMP naming of dataSigChanNisFramer components. These components cannot be added nor deleted.

dataSigChanNisFramerComponentName

This variable provides the component's string name for use with the ASCII Console Interface

dataSigChanNisFramerStorageType

This variable represents the storage type value for the dataSigChanNisFramer tables.

dataSigChanNisFramerIndex

This variable represents the index for the dataSigChanNisFramer tables.

dataSigChanNisFramerProvTable

This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.

dataSigChanNisFramerProvEntry

An entry in the dataSigChanNisFramerProvTable.

dataSigChanNisFramerInterfaceName

This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.

dataSigChanNisFramerStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

dataSigChanNisFramerStateEntry

An entry in the dataSigChanNisFramerStateTable.

dataSigChanNisFramerAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

dataSigChanNisFramerOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

dataSigChanNisFramerUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

dataSigChanNisFramerStatsTable

This group contains the operational statistics data for a Framer component.

dataSigChanNisFramerStatsEntry

An entry in the dataSigChanNisFramerStatsTable.

dataSigChanNisFramerFrmToIf

This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value.

dataSigChanNisFramerFrmFromIf

This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value.

dataSigChanNisFramerOctetFromIf

The number of bytes received from the link interface by Framer.

dataSigChanNisFramerAborts

This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value.

dataSigChanNisFramerCrcErrors

This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value.

dataSigChanNisFramerLrcErrors

This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value.

dataSigChanNisFramerNonOctetErrors

This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value.

dataSigChanNisFramerOverruns

This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value.

dataSigChanNisFramerUnderruns

This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum value.

dataSigChanNisFramerLargeFrmErrors

This attribute counts the total number of frames received which were too large. The frame was longer than 500 bytes. This count wraps to zero after reaching its maximum value.