Nortel-Magellan-Passport-DpnTrunksMIB Download

dpnGateRowStatusTable

This entry controls the addition and deletion of dpnGate components.

dpnGateRowStatusEntry

A single entry in the table represents a single dpnGate component.

dpnGateRowStatus

This variable is used as the basis for SNMP naming of dpnGate components. These components can be added and deleted.

dpnGateComponentName

This variable provides the component's string name for use with the ASCII Console Interface

dpnGateStorageType

This variable represents the storage type value for the dpnGate tables.

dpnGateIndex

This variable represents the index for the dpnGate tables.

dpnGateIfEntryTable

This group contains the provisionable attributes for the ifEntry.

dpnGateIfEntryEntry

An entry in the dpnGateIfEntryTable.

dpnGateIfAdminStatus

The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.

dpnGateIfIndex

This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.

dpnGateProvTable

This group of provisionable attributes provide parameters used by DpnGateway for staging.

dpnGateProvEntry

An entry in the dpnGateProvTable.

dpnGateExpectedRemoteNamsId

This attribute specifies the expected Nams Identifier of the module to which this DpnGateway is connected. The DpnGateway end points exchange their Nams Identifiers through the DpnGateway's staging protocol. The staged value is validated and the remoteVal ...

dpnGateRemoteValidationAction

This attribute specifies the action to be taken if there is a mismatch between the provisioned value and the value received from the remote end, in cases where the expectedRemoteNamsId is non-zero. If this attribute is provisioned to continue then upon an ...

dpnGateLinkType

This attribute specifies the type of network link. If this attribute is provisioned to dedicated then the link is a dedicated network link to a DPN module. If this attribute is provisioned to dialIn then the link is connected to the DPN module through a p ...

dpnGateOverridesTable

Theses attribute comprise the set of provisionable override parameters supported by both the Trunk and DpnGateway components. The attributes are used when reporting operational attributes (used for metric calculations) to the routing system.

dpnGateOverridesEntry

An entry in the dpnGateOverridesTable.

dpnGateOverrideTransmitSpeed

This is the overridden value of link speed (bit/s) that, if staged successfully with the remote, is reported to the routing system for metric calculations. A zero indicates that an override value has not been provided and that only the measured value will ...

dpnGateOldOverrideRoundTripDelay

This is the overridden value of link delay (ms) that, if staged successfully with the remote, is reported to the routing system for metric calculations. A zero indicates that an override value has not been provided and that only the measured value will be ...

dpnGateOverrideRoundTripUsec

This is the overridden value of link delay (ms) that, if staged successfully with the remote, is reported to the routing system for metric calculations. A zero indicates that an override value has not been provided and that only the measured value will be ...

dpnGateStateTable

This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported b ...

dpnGateStateEntry

An entry in the dpnGateStateTable.

dpnGateAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

dpnGateOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

dpnGateUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

dpnGateAvailabilityStatus

If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that ei ...

dpnGateProceduralStatus

If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that eith ...

dpnGateControlStatus

If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either ...

dpnGateAlarmStatus

If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either th ...

dpnGateStandbyStatus

If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a n ...

dpnGateUnknownStatus

This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not know ...

dpnGateOperStatusTable

This group includes the Operational Status attribute. This attribute defines the current operational state of this component.

dpnGateOperStatusEntry

An entry in the dpnGateOperStatusTable.

dpnGateSnmpOperStatus

The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operation ...

dpnGateOperTable

This group of attributes contain the operational information associated with this DpnGateway and the remote to which it has it staged.

dpnGateOperEntry

An entry in the dpnGateOperTable.

dpnGateRemoteComponentName

This attribute indicates the Component Name of the remote DPN- 100 Utp Trunk or NetworkLink supplied by the staging protocol. It is in the format PM/n PE/n PI/n PO/n where PM is the remote module Nams Identifier, PE is the remote module Processor Element ...

dpnGateRemoteNamsMnemonic

This attribute indicates the Nams Mnemonic of the remote DPN- 100 Module supplied by the staging protocol. It can be used as a parameter to Rtg Dpn for displaying all DpnGateway that are connect to the same module.

dpnGateLinkMode

This attribute indicates whether the DpnGateway is a Trunk connected to a DPN-100 RM or a NetworkLink connected to a DPN-100 AM.

dpnGateActivateReason

This attribute indicates the reason the DpnGateway has been activated by the remote end. The value corresponds to the link type of the DPN end. It is always unknown until the link comes into service. If this attribute is set to dedicated, the DPN is a ded ...

dpnGateTransportTable

This group of attributes contains the set of operational parameters measured and maintained by both the Trunk and DpnGateway components.

dpnGateTransportEntry

An entry in the dpnGateTransportTable.

dpnGateMeasuredSpeedToIf

This attribute indicates the current 'transmittable' bandwidth of the underlying facility. For a Trunk with a Unack subcomponent, and a DpnGateway with a Utp subcomponent, if a serial port is used, the value is the measured transmit speed of the port; if ...

dpnGateMeasuredRoundTripDelay

This attribute indicates the measured Round Trip Delay (msec) discovered with the remote through the Trunk and DpnGateway staging protocols. The value includes emission, propagation, and queuing delays. A 512 byte data packet is used to perform the measur ...

dpnGateMaxTxUnit

This is the maximum transmission unit (byte size) that is supported by the Trunk or DpnGateway component. This size includes the data and routing headers. A value of zero indicates the MTU has not yet been determined.

dpnGateMeasuredRoundTripDelayUsec

This attribute indicates the measured Round Trip Delay (msec) discovered with the remote through the Trunk and DpnGateway staging protocols. The value includes emission, propagation, and queuing delays. A 512 byte data packet is used to perform the measur ...

dpnGateStatsTable

This group of attributes contains statistics collected by the DpnGateway component.

dpnGateStatsEntry

An entry in the dpnGateStatsTable.

dpnGatePktFromIf

This attribute counts the number of packets received from the remote module. This counter wraps around to zero when the maximum value is reached.

dpnGateTrunkPktFromIf

This attribute counts the number of internal trunk protocol packets received from the remote module. These packets are forwarded to the DpnGateway component. This counter wraps around to zero when the maximum value is reached.

dpnGateTrunkPktToIf

This attribute counts the number of internal trunk protocol packets transmitted to the remote module. This counter wraps around to zero when the maximum value is reached.

dpnGateDiscardUnforward

This attribute counts the number of packets received from the remote module that have been discarded. This counter wraps around to zero when the maximum value is reached. Two main reasons that cause this counter to increment are: the remote protocol is no ...

dpnGateDiscardTrunkPktFromIf

This attribute counts the number of internal trunk protocol packets received from the remote module that have been discarded. This counter wraps around to zero when the maximum value is reached. The two main reasons that cause this counter to increment is ...

dpnGateStagingAttempts

This attribute counts the number of times that the staging protocol has attempted to stage with the remote module. This counter wraps around to zero when the maximum value is reached. The main reason for this counter to increment is that the local hardwar ...

dpnGateDiscardTrunkPktToIf

This attribute counts the number of internal trunk protocol packets that have been discarded before being transmitted to the remote module. This counter wraps around to zero when the maximum value is reached. The main reason that causes this counter to in ...

dpnGateFwdStatsRowStatusTable

This entry controls the addition and deletion of dpnGateFwdStats components.

dpnGateFwdStatsRowStatusEntry

A single entry in the table represents a single dpnGateFwdStats component.

dpnGateFwdStatsRowStatus

This variable is used as the basis for SNMP naming of dpnGateFwdStats components. These components cannot be added nor deleted.

dpnGateFwdStatsComponentName

This variable provides the component's string name for use with the ASCII Console Interface

dpnGateFwdStatsStorageType

This variable represents the storage type value for the dpnGateFwdStats tables.

dpnGateFwdStatsIndex

This variable represents the index for the dpnGateFwdStats tables.

dpnGateFwdStatsOperTable

This operational group counts the Trunk or DpnGateway packet forwarding traffic statistics for operator console display.

dpnGateFwdStatsOperEntry

An entry in the dpnGateFwdStatsOperTable.

dpnGateFwdStatsFwdPktFromIf

This attribute counts the number of forwarding packets received by the Trunk or DpnGateway. This counter wraps around to zero when the maximum value is exceeded.

dpnGateFwdStatsFwdDiscUnforwardFromIf

This attribute counts the number of forwarding packets discarded by the Trunk or DpnGateway. This counter wraps around to zero when the maximum value is exceeded.

dpnGateFwdStatsFwdOctetFromIf

This attribute counts the number of forwarding bytes received by the Trunk or DpnGateway. This counter wraps around to zero when the maximum value is exceeded.