Nortel-Magellan-Passport-FraDpnTrunksMIB Download

dpnGateFrAccessRowStatusTable

This entry controls the addition and deletion of dpnGateFrAccess components.

dpnGateFrAccessRowStatusEntry

A single entry in the table represents a single dpnGateFrAccess component.

dpnGateFrAccessRowStatus

This variable is used as the basis for SNMP naming of dpnGateFrAccess components. These components can be added and deleted.

dpnGateFrAccessComponentName

This variable provides the component's string name for use with the ASCII Console Interface

dpnGateFrAccessStorageType

This variable represents the storage type value for the dpnGateFrAccess tables.

dpnGateFrAccessIndex

This variable represents the index for the dpnGateFrAccess tables.

dpnGateFrAccessProvTable

This group of provisionable attributes contains the parameters used by Unacknowledged, Utp, and FrAccess for monitoring link quality.

dpnGateFrAccessProvEntry

An entry in the dpnGateFrAccessProvTable.

dpnGateFrAccessMaximumErroredInterval

This attribute specifies the interval time over which the error threshold (as specified by receiveErrorSensitivity) must be continuously exceeded before the Unacknowledged, Utp, or FrAccess component can be degraded. Once the error interval count exceeds ...

dpnGateFrAccessReceiveErrorSensitivity

This attribute is the allowable error rate beyond which the Unacknowledged, Utp, or FrAccess component can be degraded if it persists for a duration longer than the maximumErrorInterval. The threshold is expressed as a percentage of number of errored fram ...

dpnGateFrAccessStateTable

This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported b ...

dpnGateFrAccessStateEntry

An entry in the dpnGateFrAccessStateTable.

dpnGateFrAccessAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

dpnGateFrAccessOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

dpnGateFrAccessUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

dpnGateFrAccessAvailabilityStatus

If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that ei ...

dpnGateFrAccessProceduralStatus

If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that eith ...

dpnGateFrAccessControlStatus

If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either ...

dpnGateFrAccessAlarmStatus

If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either th ...

dpnGateFrAccessStandbyStatus

If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a n ...

dpnGateFrAccessUnknownStatus

This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not know ...

dpnGateFrAccessOpTable

This group of attributes contains the set of LTP operational parameters measured and maintained by this component.

dpnGateFrAccessOpEntry

An entry in the dpnGateFrAccessOpTable.

dpnGateFrAccessRoundTripDelay

This is the measured Round Trip Delay (ms) discovered with the remote through the LTP staging protocol. The value includes emission, propagation, and queuing delays. A 2 byte control frame is used to perform the measurement. A value of zero is displayed w ...

dpnGateFrAccessStatsTable

This group contains the operational statistics for FrAccess.

dpnGateFrAccessStatsEntry

An entry in the dpnGateFrAccessStatsTable.

dpnGateFrAccessReceivedBytesFromIf

This attribute counts the number of bytes received by FrAccess in information frames. When the maximum count is reached the count wraps to zero.

dpnGateFrAccessLostFramesFromIf

This attribute counts the frames lost in the direction from interface, the loss of which is detected based on the sequence number mechanism. The reason for a loss may be the congestion-related loss in the external frame relay network, or errors/congestion ...

dpnGateFrAccessDiscardBadFromIf

This attribute counts the number of frames discarded in the direction 'from interface', because they are unknown to the FrAccess protocol. When the maximum count is reached the count wraps to zero.

dpnGateFrAccessDiscardExcessToIf

This attribute counts the number of frames discarded in the direction 'to interface' because of congestion on the transmit queue. When the maximum count is reached the count wraps to zero.

dpnGateFrAccessFrMuxSetupRowStatusTable

This entry controls the addition and deletion of dpnGateFrAccessFrMuxSetup components.

dpnGateFrAccessFrMuxSetupRowStatusEntry

A single entry in the table represents a single dpnGateFrAccessFrMuxSetup component.

dpnGateFrAccessFrMuxSetupRowStatus

This variable is used as the basis for SNMP naming of dpnGateFrAccessFrMuxSetup components. These components cannot be added nor deleted.

dpnGateFrAccessFrMuxSetupComponentName

This variable provides the component's string name for use with the ASCII Console Interface

dpnGateFrAccessFrMuxSetupStorageType

This variable represents the storage type value for the dpnGateFrAccessFrMuxSetup tables.

dpnGateFrAccessFrMuxSetupIndex

This variable represents the index for the dpnGateFrAccessFrMuxSetup tables.

dpnGateFrAccessFrMuxSetupTrafficDescrTable

This group contains the provisionable attributes for the application of which this FrMuxSetup is a subcomponent. The parameters are used for maximum frame size checking and traffic shaping and are to be passed over to FrMux Dlci associated with the applic ...

dpnGateFrAccessFrMuxSetupTrafficDescrEntry

An entry in the dpnGateFrAccessFrMuxSetupTrafficDescrTable.

dpnGateFrAccessFrMuxSetupCommittedInformationRate

This attribute specifies, in bit/s, the committed information rate (CIR) to which the traffic transmitted towards the interface is shaped. The minimum value is 4800 bit/s.

dpnGateFrAccessFrMuxSetupCommittedBurstSize

THIS ATTRIBUTE IS NOT BEING USED.

dpnGateFrAccessFrMuxSetupMaximumFrameSize

This attribute specifies the maximum number of octets which may be included in the information field. The frame relay header and CRC octets are not included in this definition. This attribute corresponds to the dN1 parameter described in the Vendor Forum ...

dpnGateFrAccessFrMuxSetupDlciCompNameOpTable

This group contains the component name of the Dlci which carries the traffic for this application.

dpnGateFrAccessFrMuxSetupDlciCompNameOpEntry

An entry in the dpnGateFrAccessFrMuxSetupDlciCompNameOpTable.

dpnGateFrAccessFrMuxSetupDlciCompName

This attribute specifies the component name of the Dlci with which the application using this FrMuxSetup component is associated. The name is a string FrMux/n Dlci/m. For a PVC this is the same component name as provisioned under the subcomponent FrMuxPvc ...

dpnGateFrAccessFrMuxSetupPvcSetupRowStatusTable

This entry controls the addition and deletion of dpnGateFrAccessFrMuxSetupPvcSetup components.

dpnGateFrAccessFrMuxSetupPvcSetupRowStatusEntry

A single entry in the table represents a single dpnGateFrAccessFrMuxSetupPvcSetup component.

dpnGateFrAccessFrMuxSetupPvcSetupRowStatus

This variable is used as the basis for SNMP naming of dpnGateFrAccessFrMuxSetupPvcSetup components. These components cannot be added nor deleted.

dpnGateFrAccessFrMuxSetupPvcSetupComponentName

This variable provides the component's string name for use with the ASCII Console Interface

dpnGateFrAccessFrMuxSetupPvcSetupStorageType

This variable represents the storage type value for the dpnGateFrAccessFrMuxSetupPvcSetup tables.

dpnGateFrAccessFrMuxSetupPvcSetupIndex

This variable represents the index for the dpnGateFrAccessFrMuxSetupPvcSetup tables.

dpnGateFrAccessFrMuxSetupPvcSetupProvTable

This group contains provisionable attributes for setting up a Dlci associated with the application using the FrMuxSetup component. The Dlci is of the PVC type.

dpnGateFrAccessFrMuxSetupPvcSetupProvEntry

An entry in the dpnGateFrAccessFrMuxSetupPvcSetupProvTable.

dpnGateFrAccessFrMuxSetupPvcSetupDlciName

This attribute is the link to the Dlci which is associated with the application using the FrMuxSetup component.