Nortel-Magellan-Passport-SoftwareMIB Download

swRowStatusTable

This entry controls the addition and deletion of sw components.

swRowStatusEntry

A single entry in the table represents a single sw component.

swRowStatus

This variable is used as the basis for SNMP naming of sw components. These components cannot be added nor deleted.

swComponentName

This variable provides the component's string name for use with the ASCII Console Interface

swStorageType

This variable represents the storage type value for the sw tables.

swIndex

This variable represents the index for the sw tables.

swOperTable

This group contain the operational attributes for the SW component.

swOperEntry

An entry in the swOperTable.

swTidyStatus

This attribute indicates the tidy or remove status. If the value is inactive, no tidy or remove is in progress. If the value is inProgress or querying, the tidy or remove process has begun and therefore no further Tidy Sw or Remove sw/ command is ...

swAvBeingTidied

This attribute indicates the name of the AV currently being tidied or removed. An empty string indicates there is no AV being tidied.

swAvlTable

This attribute specifies, for each application, which version of its Features and the associated software will be loaded when any of its Features are selected in an LPT. A version of the 'base' application must be specified. All names specified by the use ...

swAvlEntry

An entry in the swAvlTable.

swAvlValue

This variable represents both the value and the index for the swAvlTable.

swAvlRowStatus

This variable is used to control the addition and deletion of individual values of the swAvlTable.

swAvListToTidyTable

This attribute holds the list of names of AVs to be tidied or removed. As AVs are successfully cleaned, they are removed from this list and added to avListTidied.

swAvListToTidyEntry

An entry in the swAvListToTidyTable.

swAvListToTidyValue

This variable represents both the value and the index for the swAvListToTidyTable.

swAvListTidiedTable

This attribute holds the list of names of AVs which have been successfully tidied or removed as a result of the last Tidy Sw or Remove Sw av/ command. It is cleared each time a new Tidy Sw or Remove Sw av/ command is issued.

swAvListTidiedEntry

An entry in the swAvListTidiedTable.

swAvListTidiedValue

This variable represents both the value and the index for the swAvListTidiedTable.

swPatlTable

This attribute specifies which patches are to be loaded and enabled. Only patches for Av's that appear in the AvList may be specified. Only patches appearing as instances of Sw Av Patch may be specified. Patch names are case insensitive. Except for case, ...

swPatlEntry

An entry in the swPatlTable.

swPatlValue

This variable represents both the value and the index for the swPatlTable.

swPatlRowStatus

This variable is used to control the addition and deletion of individual values of the swPatlTable.

swDldRowStatusTable

This entry controls the addition and deletion of swDld components.

swDldRowStatusEntry

A single entry in the table represents a single swDld component.

swDldRowStatus

This variable is used as the basis for SNMP naming of swDld components. These components cannot be added nor deleted.

swDldComponentName

This variable provides the component's string name for use with the ASCII Console Interface

swDldStorageType

This variable represents the storage type value for the swDld tables.

swDldIndex

This variable represents the index for the swDld tables.

swDldOperTable

This group contains the operational attributes for the Download component.

swDldOperEntry

An entry in the swDldOperTable.

swDldAvBeingDownloaded

This attribute indicates the name of the AV currently being downloaded. If the download is inProgress, the value of this attribute is the first AV in the list of AVs to be downloaded. If there is no AV being downloaded, this attribute contains an empty st ...

swDldStatus

This attribute indicates the download status. If it is inactive, no download is in progress. This is the value required in order to issue a Start command. If it is inProgress, the download procedure has begun. This process starts from the time a Software ...

swDldFilesToTransfer

This attribute indicates the number of files which are still left to transfer for the AV currently being downloaded. It is cleared each time a new AV is processed from the avListToDownload. Note that for each AV, the value of this attribute is 0 until the ...

swDldProcessorTargets

This attribute indicated the processor based object file to download on switch. Description of bits: i960(0) ppc(1)

swDldDldListTable

This attribute holds the list of names of AVs to be downloaded. If a download is in progress, the first one in the list is the one currently being downloaded. As AVs are successfully downloaded, they are removed from this list and added to the downloadedA ...

swDldDldListEntry

An entry in the swDldDldListTable.

swDldDldListValue

This variable represents both the value and the index for the swDldDldListTable.

swDldDldListRowStatus

This variable is used to control the addition and deletion of individual values of the swDldDldListTable.

swDldDownloadedAvListTable

This attribute holds the list of names of AVs which have been successfully downloaded as a result of the last Start command. It is cleared each time the Start command is issued.

swDldDownloadedAvListEntry

An entry in the swDldDownloadedAvListTable.

swDldDownloadedAvListValue

This variable represents both the value and the index for the swDldDownloadedAvListTable.

swAvRowStatusTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of swAv components.

swAvRowStatusEntry

A single entry in the table represents a single swAv component.

swAvRowStatus

This variable is used as the basis for SNMP naming of swAv components. These components cannot be added nor deleted.

swAvComponentName

This variable provides the component's string name for use with the ASCII Console Interface

swAvStorageType

This variable represents the storage type value for the swAv tables.

swAvIndex

This variable represents the index for the swAv tables.

swAvOperTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes for an AV component.

swAvOperEntry

An entry in the swAvOperTable.

swAvProcessorTargets

This is a list of the processor based object file types which exist on disk for a given AV. Semantic check will validate that the object files needed for a provisioned card type are present as part of an application. Description of bits: i960(0) ppc(1)

swAvCompatibleAvListTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This is a list of the AV names which specify the minimum version of all other applications that can be used in conjunction with this AV in an AVL. Semantic checks will validate that AVs within the AVL are indee ...

swAvCompatibleAvListEntry

An entry in the swAvCompatibleAvListTable.

swAvCompatibleAvListValue

This variable represents both the value and the index for the swAvCompatibleAvListTable.

swAvFeatRowStatusTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of swAvFeat components.

swAvFeatRowStatusEntry

A single entry in the table represents a single swAvFeat component.

swAvFeatRowStatus

This variable is used as the basis for SNMP naming of swAvFeat components. These components cannot be added nor deleted.

swAvFeatComponentName

This variable provides the component's string name for use with the ASCII Console Interface

swAvFeatStorageType

This variable represents the storage type value for the swAvFeat tables.

swAvFeatIndex

This variable represents the index for the swAvFeat tables.

swAvPatchRowStatusTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of swAvPatch components.

swAvPatchRowStatusEntry

A single entry in the table represents a single swAvPatch component.

swAvPatchRowStatus

This variable is used as the basis for SNMP naming of swAvPatch components. These components cannot be added nor deleted.

swAvPatchComponentName

This variable provides the component's string name for use with the ASCII Console Interface

swAvPatchStorageType

This variable represents the storage type value for the swAvPatch tables.

swAvPatchIndex

This variable represents the index for the swAvPatch tables.

swAvPatchOperTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes for the Patch component.

swAvPatchOperEntry

An entry in the swAvPatchOperTable.

swAvPatchDescription

This attribute indicates the new behavior that the patch provides. The availability of this description is dependent on the disk being available.

swLptRowStatusTable

This entry controls the addition and deletion of swLpt components.

swLptRowStatusEntry

A single entry in the table represents a single swLpt component.

swLptRowStatus

This variable is used as the basis for SNMP naming of swLpt components. These components can be added and deleted.

swLptComponentName

This variable provides the component's string name for use with the ASCII Console Interface

swLptStorageType

This variable represents the storage type value for the swLpt tables.

swLptIndex

This variable represents the index for the swLpt tables.

swLptProvTable

This group contains the provisionable attributes for the LPT component.

swLptProvEntry

An entry in the swLptProvTable.

swLptCommentText

An arbitrary string used to enter a comment about an LPT.

swLptSystemConfig

This attribute specifies which set of preconfigured system parameters to use for the set of Features selected in featureList.

swLptFlTable

This attribute specifies a list of names of Features that define a particular configuration of application functionality that the user wants to load on a single processor. The combination of Features selected must be compatible (for example, none can be m ...

swLptFlEntry

An entry in the swLptFlTable.

swLptFlValue

This variable represents both the value and the index for the swLptFlTable.

swLptFlRowStatus

This variable is used to control the addition and deletion of individual values of the swLptFlTable.

swLptLogicalProcessorsTable

This attribute shows which LPs are configured to load the Feature files associated with this LPT. It is the opposite side of the LP component's logicalProcessorType link attribute.

swLptLogicalProcessorsEntry

An entry in the swLptLogicalProcessorsTable.

swLptLogicalProcessorsValue

This variable represents both the value and the index for the swLptLogicalProcessorsTable.