Nortel-Magellan-Passport-SubnetInterfaceMIB Download

modVcsRowStatusTable

This entry controls the addition and deletion of modVcs components.

modVcsRowStatusEntry

A single entry in the table represents a single modVcs component.

modVcsRowStatus

This variable is used as the basis for SNMP naming of modVcs components. These components can be added and deleted.

modVcsComponentName

This variable provides the component's string name for use with the ASCII Console Interface

modVcsStorageType

This variable represents the storage type value for the modVcs tables.

modVcsIndex

This variable represents the index for the modVcs tables.

modVcsAccOptTable

Accounting information is owned by the Vc System; it is stored in the Vc Accounting component, which itself is considered to be a component on the switch. The Accounting Component contains a bit map indicating which of the accounting facilities are to be ...

modVcsAccOptEntry

An entry in the modVcsAccOptTable.

modVcsSegmentSize

This attribute specifies the segment size for accounting of national calls. Minimum allowed segment size is 1. If data segment is sent which is less than segmentSize it is still counted as one segment.

modVcsUnitsCounted

This attribute specifies what is counted by frame services. If set to frames, frames are counted, else segments are counted.

modVcsAccountingFax

Each value corresponds to an accounting facility code, of which there are currently 10 facility codes defined with codes H.00 to H.09, and corresponding to the above 10 facilities. Each of the above facilities may or may not be present and stored in the V ...

modVcsGenerationMode

This attribute specifies part of the rules by which the network generates accounting records. If set to bothEnds, then both ends of the Vc generate accounting records. If set to singleEnd, then the charged end of the Vc generates accounting records. In si ...

modVcsAddOptTable

The Vc AddressingOptions group describes the addressing parameters. It is currently owned by the Vc. Most of the data contained in the Vc AddressingOptions group is identical network wide even though the group can be changed and upgraded on a module by mo ...

modVcsAddOptEntry

An entry in the modVcsAddOptTable.

modVcsDefaultNumberingPlan

This attribute specifies the numbering plan used which determines the address format: X.121-- the international numbering plan for public packet switched data networks or E.164-- the international numbering plan for ISDN and PSTN. The default numbering pl ...

modVcsNetworkIdType

This attribute specifies whether the network uses a DNIC or INIC. It is used by X.75 Gateways to indicate whether in network the DNIC or INIC is used in various utilities. If it is DNIC it can be DNIC or DCC type. If it is INIC it can be 4 digits only.

modVcsX121Type

This attribute specifies whether DNIC mode or DCC mode is used in X.121 address of international calls. If DCC is specified, then the first 3 digits of each DNA must be the Network ID Code. If this attribute is changed all Dnas in the network must start w ...

modVcsNetworkIdCode

This attribute specifies the DNIC (Data Network ID Code) of the network or DCC code.

modVcsX121IntlAddresses

This attribute indicates if any DTE is allowed to signal international addresses.

modVcsX121IntllPrefixDigit

This attribute indicates the prefix digit to be used for X.121 international calls. When this digit is provided the call will have full international address.

modVcsX121MinAddressLength

This attribute indicates minimum length of x121 address.

modVcsX121MaxAddressLength

This attribute indicates maximum length of x121 address.

modVcsX121ToE164EscapeSignificance

This attribute specifies whether an X.121 to E.164 escape digit has significance in selecting an X.32 (analog) or an ISDN switched path. If two values are significant (the value 0 or the value 9) then yes is set to this attribute. If the value of the orig ...

modVcsE164IntlFormatAllowed

This attribute indicates whether or not to allow national format E.164 addresses. If this attribute is set to a value of Yes (=1) then national format E.164 addresses are not allowed and international format addresses only are allowed. If this attribute i ...

modVcsE164IntlPrefixDigits

This attribute specifies the E.164 international prefix digits. If applicable, it is specified as 1 to 3 BCD digits. The 3 BCD digits are stored with the length of the international prefix in the low order nibble, nibble [0] followed by the most significa ...

modVcsE164NatlPrefixDigit

This attribute contains the E.164 national prefix which may be added in front of E.164 local or national call. If e164IntlFormatOnly is set to 1, this attribute is not needed.

modVcsE164LocalAddressLength

This attribute indicates the length of a local E.164 DNA on this module. This attribute is not required if the corresponding attribute, e164IntlFormatOnly is set to a value of yes. This attribute does not need to be consistent across all of the nodes in t ...

modVcsE164TeleCountryCode

This attribute specifies the E.164 Telephone Country Code (TCC) for the country in which the network resides. If applicable, it is specified as 1 to 3 BCD digits. The 3 BCD digits are stored with the length of the TCC in the low order nibble, nibble [0] f ...

modVcsE164NatlMinAddressLength

This attribute indicates minimum length of e164 national address.

modVcsE164NatlMaxAddressLength

This attribute indicates maximum length of e164 national address.

modVcsE164IntlMinAddressLength

This attribute indicates minimum length of e164 international address.

modVcsE164IntlMaxAddressLength

This attribute indicates maximum length of e164 international address.

modVcsE164LocalMinAddressLength

This attribute indicates minimum length of e164 local address.

modVcsE164LocalMaxAddressLength

This attribute indicates maximum length of e164 local address.

modVcsIntOptTable

The Vc InterfaceOptions group defines Vc system parameters common in the network. It is owned by the Vc and is considered to be a module wide component on the switch. The data contained in the Vc InterfaceOptions group must be identical network wide even ...

modVcsIntOptEntry

An entry in the modVcsIntOptTable.

modVcsHighPriorityPacketSizes

This attribute indicates which packet sizes are supported for high priority calls within the network. Description of bits: n16(0) n32(1) n64(2) n128(3) n256(4) n512(5) n1024(6) n2048(7) n4096(8)

modVcsMaxSubnetPacketSize

This attribute specifies the maximum subnet packet size used for the connections originating or terminating on this module. All modules in the same network should have the same maxSubnetPacketSize. If this value is not identical throughout the network, th ...

modVcsCallSetupTimer

This attribute specifies the Vc callSetupTimer in units of 1 second ticks. This timer specifies how long the Vc will wait, after sending a subnet Call Request packet into the network, for a response from the remote end of the Vc (in the form of a subnet R ...

modVcsCallRetryTimer

This attribute specifies, for Vc implementing Direct Calls with the auto-call retry feature (including PVCs), the Vc callRetryTimer in units of 1 second ticks. This timer specifies how long the Vc will wait between unsuccessful call attempts.

modVcsDelaySubnetAcks

This attribute specifies delay acknowledgment timer mechanism. If this attribute is set to no, then the Vc will automatically return acknowledgment packets without delay. If this attribute is set to yes, then the Vc will wait for one second in an attempt ...

modVcsWinsTable

This is the windowSize corresponding to the given packet size and throughput class. All Vcs using the windowSize matrix support large Vc windows on both ends of the Vc, and support the signalling of the chosen Vc window size from the destination (called) ...

modVcsWinsEntry

An entry in the modVcsWinsTable.

modVcsWinsPktIndex

This variable represents the next to last index for the modVcsWinsTable.

modVcsWinsTptIndex

This variable represents the final index for the modVcsWinsTable.

modVcsWinsValue

This variable represents an individual value for the modVcsWinsTable.