Nortel-Magellan-Passport-TimeMIB Download

timeRowStatusTable

This entry controls the addition and deletion of time components.

timeRowStatusEntry

A single entry in the table represents a single time component.

timeRowStatus

This variable is used as the basis for SNMP naming of time components. These components cannot be added nor deleted.

timeComponentName

This variable provides the component's string name for use with the ASCII Console Interface

timeStorageType

This variable represents the storage type value for the time tables.

timeIndex

This variable represents the index for the time tables.

timeOperTable

This group contains the operational attributes of the Time component.

timeOperEntry

An entry in the timeOperTable.

timeNetworkTime

The networkTime attribute represents the current date and time. The operator resets the current date and time by setting this attribute. If syncStatus is synchronized or synchronizing, the set verb is disabled.

timeSyncStatus

This attribute indicates the XNTP (Network Time Protocol) synchronization status of this module. If the value is synchronized or synchronizing, the syncSource attribute indicates the IP address of the main network time server. The values have the followin ...

timeSyncSource

The syncSource is the IP address of the time server host to which the module's syncStatus is synchronized. If the module's syncStatus is unsynchronized, the address is 0.0.0.0.

timeTimeOffset

The timeOffset attribute is the number of minutes, to add to the reference time, which is equal to the Universal Coordinated Time (UTC), to obtain the moduleTime.

timeModuleTime

This attribute indicates the current date and time on this module. The moduleTime is obtained by adding an offset to the reference time, which is the Universal Time Coordinated (UTC). When the moduleTime is set, it keeps the value even if the card boots. ...

timeOffset

This attribute specifies the number of minutes to be added to the reference time, which is Universal Coordinated Time (UTC), to obtain the moduleTime. It keeps its value even if the card boots. However, if the node is powered-off for more than 24 hours, i ...

timeMainServer

This attribute indicates the IP address of the main network time server that this module synchronizes with. If syncStatus is unsynchronized, then mainServer is 0.0.0.0.

timeXntpVersion

This attribute indicates the current protocol version of XNTP running on this module.

timeSyncSourcesTable

This attribute indicates the IP addresses of the network time servers that this module synchronizes with. XNTP uses the clock values of the network time servers to set its moduleTime.

timeSyncSourcesEntry

An entry in the timeSyncSourcesTable.

timeSyncSourcesValue

This variable represents both the value and the index for the timeSyncSourcesTable.

timeServerRowStatusTable

This entry controls the addition and deletion of timeServer components.

timeServerRowStatusEntry

A single entry in the table represents a single timeServer component.

timeServerRowStatus

This variable is used as the basis for SNMP naming of timeServer components. These components can be added and deleted.

timeServerComponentName

This variable provides the component's string name for use with the ASCII Console Interface

timeServerStorageType

This variable represents the storage type value for the timeServer tables.

timeServerIndex

This variable represents the index for the timeServer tables.

timeServerProvTable

This group contains the provisionable attributes of the Server component.

timeServerProvEntry

An entry in the timeServerProvTable.

timeServerIpAddress

This attribute specifies the IP address of a network time server that the module will attempt to synchronize with. The value of ipAddress must be unique across all Server components.

timeServerIpStack

This attribute specifies the IP stack that XNTP uses to communi- cate with the network time server. If ipiFrIpiVc is selected, then an IpiFr or IpiVc component must be provisioned on this module. If vrIp is selected, then Ip must be provisioned under the ...

timeServerStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

timeServerStateEntry

An entry in the timeServerStateTable.

timeServerAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

timeServerOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

timeServerUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

timeServerOperTable

This group contains the operational attributes of the Server component.

timeServerOperEntry

An entry in the timeServerOperTable.

timeServerXntpVersion

This attribute indicates the version of XNTP currently in use by the network time server.

timeServerStratum

This attribute indicates the stratum level of the clock on the network time server.

timeServerPoll

This attribute indicates the time interval for the Passport module to poll the network time server for time synchronization.

timeServerPktSent

This attribute counts the packets sent to the network time server.

timeServerPktRecv

This attribute counts the packets received from the network time server, including the invalid packets.

timeServerPktValid

This attribute counts the valid packets received from the network time server.

timeServerStatus

This attribute indicates the status of the network time server. main -- This network time server is working properly, and is the system servers (synchronization sources) of the module. primary -- This network time server is working properly, and is the pr ...

nSRowStatusTable

This entry controls the addition and deletion of nS components.

nSRowStatusEntry

A single entry in the table represents a single nS component.

nSRowStatus

This variable is used as the basis for SNMP naming of nS components. These components can be added and deleted.

nSComponentName

This variable provides the component's string name for use with the ASCII Console Interface

nSStorageType

This variable represents the storage type value for the nS tables.

nSIndex

This variable represents the index for the nS tables.

nSProvTable

This group contains all of the provisioning data for the NetworkSynchronization component.

nSProvEntry

An entry in the nSProvTable.

nSPrimaryReference

This component name is the port that is the preferred choice as the reference for the network clock.

nSSecondaryReference

This component name is the port that is the second choice for the reference for the network clock.

nSTertiaryReference

This component name is the port that is the third choice for the reference for the network clock.

nSStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

nSStateEntry

An entry in the nSStateTable.

nSAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

nSOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

nSUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

nSOperTable

This group contains the operational attributes for the network clock sync

nSOperEntry

An entry in the nSOperTable.

nSClockSyncState

When the clockSyncState is in the freeRun state, either no reference have beed provisioned or none of the provisioned references have been found to be valid. The Stratum-3 clock is allowed to run freely at its last adjusted frequency. When the clockSyncS ...

nSActiveReference

Indicates the active 8Khz clock reference source

nSStandbyReference

Indicates the standby 8Khz clock reference source which will be selected if a failure is detected on the active source.