Nortel-Magellan-Passport-VirtualRouterMIB Download

vrRowStatusTable

This entry controls the addition and deletion of vr components.

vrRowStatusEntry

A single entry in the table represents a single vr component.

vrRowStatus

This variable is used as the basis for SNMP naming of vr components. These components can be added and deleted.

vrComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrStorageType

This variable represents the storage type value for the vr tables.

vrIndex

This variable represents the index for the vr tables.

vrAdminContorlTable

This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.

vrAdminContorlEntry

An entry in the vrAdminContorlTable.

vrSnmpAdminStatus

This sets the desired state of this VirtualRouter. The up state indicates the Vr is operational. The down state indicates the Vr is not operational. The down state is only valid when the managementAccess attribute is disabled. Testing is an invalid state ...

vrManagementAccess

This attributes defines the routing capabilities of this Virtual Router and controls the tcp access into that Vr. External access is only permitted through the Vr that has this attribute enabled. The attribute allows the following subcomponents to be prov ...

vrVirtualPrivateIntranetIdentifier

Identifies the Virtual Private Intranet (VPI) associated with this Virtual Router. The vpiId must be unique for each VR on a Passport and ach interconnected VR must have the same vpiId.

vrCidDataTable

This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.

vrCidDataEntry

An entry in the vrCidDataTable.

vrCustomerIdentifier

This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level compo ...

vrOperStatusTable

This group includes the Operational Status attribute. This attribute defines the current operational state of this component.

vrOperStatusEntry

An entry in the vrOperStatusTable.

vrSnmpOperStatus

The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operation ...

vrStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

vrStateEntry

An entry in the vrStateTable.

vrAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

vrOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

vrUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

vrIfNumberOperTable

This group contains the ifNumber attribute.

vrIfNumberOperEntry

An entry in the vrIfNumberOperTable.

vrIfNumber

This attribute defines the number of IfEntries in the IfTable.

vrMmRowStatusTable

This entry controls the addition and deletion of vrMm components.

vrMmRowStatusEntry

A single entry in the table represents a single vrMm component.

vrMmRowStatus

This variable is used as the basis for SNMP naming of vrMm components. These components cannot be added nor deleted.

vrMmComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrMmStorageType

This variable represents the storage type value for the vrMm tables.

vrMmIndex

This variable represents the index for the vrMm tables.

vrMmProvTable

The group includes all provisioned attributes for the MemoryManagement component.

vrMmProvEntry

An entry in the vrMmProvTable.

vrMmVrMaxHeapSpace

The maximum percentage of the total system heap space that is allowed for use by this Virtual Router. Memory allocation for this VR which attempts to exceed this limit will fail causing a shut down of the requesting process.

vrMmIpMaxHeapSpace

The maximum percentage of this VR's dynamic memory which can be allocated to this VR's IP. An attempt to allocate memory in excess of this limit forces IP to shut down.

vrMmIpxMaxHeapSpace

The maximum percentage of this VR's dynamic memory which can be allocated to this VR's IPX. An attempt to allocate memory in excess of this limit forces IPX to shut down.

vrMmBridgingMaxHeapSpace

The maximum percentage of this VR's dynamic memory which can be allocated to this VR's Bridging. An attempt to allocate memory in excess of this limit forces Bridging to shut down.

vrMmNetSentryMaxHeapSpace

The maximum percentage of this VR's dynamic memory which can be allocated to this VR's NetSentry. An attempt to allocate memory in excess of this limit forces NetSentry to shut down.

vrMmSresMaxHeapSpace

The maximum percentage of this VR's dynamic memory which can be allocated to this VR's SourceRouteEndStation. An attempt to allocate memory in excess of this limit forces SourceRouteEndStation to shut down.

vrMmSnaMaxHeapSpace

The maximum percentage of this VR's dynamic memory which can be allocated to this VR's SNA. An attempt to allocate memory in excess of this limit forces SNA to shut down.

vrMmOperTable

The group includes all operational attributes for the MemoryManagement component.

vrMmOperEntry

An entry in the vrMmOperTable.

vrMmVrHeapSpaceBytesAllocated

The number of bytes of system dynamic memory which has been allocated by this Virtual Router.

vrMmVrHeapSpaceAllocated

The percentage of system dynamic memory which is currently allocated to this Virtual Router.

vrMmIpHeapSpaceAllocated

The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's IP.

vrMmIpxHeapSpaceAllocated

The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's IPX.

vrMmBridgingHeapSpaceAllocated

The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's Bridging.

vrMmNetSentryHeapSpaceAllocated

The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's NetSentry.

vrMmSresHeapSpaceAllocated

The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's Source Route End Station.

vrMmSnaHeapSpaceAllocated

The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's SNA.

vrPpRowStatusTable

This entry controls the addition and deletion of vrPp components.

vrPpRowStatusEntry

A single entry in the table represents a single vrPp component.

vrPpRowStatus

This variable is used as the basis for SNMP naming of vrPp components. These components can be added and deleted.

vrPpComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrPpStorageType

This variable represents the storage type value for the vrPp tables.

vrPpIndex

This variable represents the index for the vrPp tables.

vrPpAdminControlTable

This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.

vrPpAdminControlEntry

An entry in the vrPpAdminControlTable.

vrPpSnmpAdminStatus

The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no o ...

vrPpProvTable

This group includes provisioned attributes specific to the ProtocolPort component.

vrPpProvEntry

An entry in the vrPpProvTable.

vrPpLinkToMedia

This attribute defines the Media Application which this Protocol Port is using as an interface to the network.

vrPpOperStatusTable

This group includes the Operational Status attribute. This attribute defines the current operational state of this component.

vrPpOperStatusEntry

An entry in the vrPpOperStatusTable.

vrPpSnmpOperStatus

The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operation ...

vrPpStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

vrPpStateEntry

An entry in the vrPpStateTable.

vrPpAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

vrPpOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

vrPpUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

vrPpOperTable

This group includes operational attributes specific to the ProtocolPort component.

vrPpOperEntry

An entry in the vrPpOperTable.

vrPpIfIndex

This represents the SNMP ifIndex which is associated with this PP. This ifIndex can be used to extract detailed information about the PP from the ifTable.

vrPpNbmaAddressTable

This group contains the operational attributes of the ProtocolPort component specific to NHRP.

vrPpNbmaAddressEntry

An entry in the vrPpNbmaAddressTable.

vrPpAtmAddress

This attribute indicates the ATM address which is associated with this protocol port. NHRP uses this address to establish shortcut connections. This attribute is not displayed if NHRP is not provisioned on this protocol port.

vrIfTableEntryRowStatusTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIfTableEntry components.

vrIfTableEntryRowStatusEntry

A single entry in the table represents a single vrIfTableEntry component.

vrIfTableEntryRowStatus

This variable is used as the basis for SNMP naming of vrIfTableEntry components. These components cannot be added nor deleted.

vrIfTableEntryComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrIfTableEntryStorageType

This variable represents the storage type value for the vrIfTableEntry tables.

vrIfTableEntryIndex

This variable represents the index for the vrIfTableEntry tables.

vrIfTableEntryIftTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents the SNMP interface table entry.

vrIfTableEntryIftEntry

An entry in the vrIfTableEntryIftTable.

vrIfTableEntryIfAdminStatus

The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.

vrIfTableEntryIfOperStatus

This attribute provides the current operational status of the interface. The testing state indicates that no operational packets can be passed.

vrIfTableEntryIfLastChange

The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.

vrIfTableEntryIfInOctets

The total number of octets received on the interface, including framing characters.

vrIfTableEntryIfOutOctets

The total number of octets transmitted out the interface, including framing characters

vrIfTableEntryIfInDiscards

The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher layer protocol. One possible reason for discarding such a packet could be to free up buffer space.

vrIfTableEntryIfOutDiscards

The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

vrIfTableEntryIfInErrors

The number of inbound packet that contained errors preventing them from being deliverable to a higher layer protocol.

vrIfTableEntryIfOutErrors

The number of outbound packets that could not be transmitted because of errors.

vrIfTableEntryIfInUcastPkts

The number of subnetwork-unicast packets delivered to a higher-layer protocol.

vrIfTableEntryIfOutUcastPkts

The total number of packets that higher level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.

vrIfTableEntryIfInNuCastPkts

The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.

vrIfTableEntryIfOutNuCastPkts

The total number of packets that higher level protocols request be transmitted to a non-unicast address, including those that were discarded or not sent.

vrIfTableEntryIfInUnknownProtos

The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

vrIfTableEntryIfOutQlength

The length of the output packet queue (in packets)

vrIfTableEntryIfDescription

A textual string containing information about the interface. This string includes the name of the manufacturer, the product name and the version of the hardware interface.

vrIfTableEntryIfType

The type of interface, distinguished according to the physical/link protocol(s) immediately below the network layer in the protocol stack

vrIfTableEntryIfMtu

The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.

vrIfTableEntryIfSpeed

An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.

vrIfTableEntryIfPhysicalAddress

The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should be an octet string of zero length.

vrIfTableEntryIfSpecific

A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If th ...

vrIfTableEntryAdditionalInfoTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains additional information associated with this ifEntry.

vrIfTableEntryAdditionalInfoEntry

An entry in the vrIfTableEntryAdditionalInfoTable.

vrIfTableEntryStdComponentName

This attribute provides a component name associated with this ifEntry. This component is the source of the data stored in this entry. More data may be determined about this entry by looking at the component associated with this component name.

vrQosPRowStatusTable

This entry controls the addition and deletion of vrQosP components.

vrQosPRowStatusEntry

A single entry in the table represents a single vrQosP component.

vrQosPRowStatus

This variable is used as the basis for SNMP naming of vrQosP components. These components can be added and deleted.

vrQosPComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrQosPStorageType

This variable represents the storage type value for the vrQosP tables.

vrQosPIndex

This variable represents the index for the vrQosP tables.

vrQosPProvTable

This group includes all attributes that can be provisioned to define an InwQualityofServiceProfile instance.

vrQosPProvEntry

An entry in the vrQosPProvTable.

vrQosPVnsDiscardPriority

This attribute specifies the throughput importance of the packets when forwarded over VNS connections. In times of congestion the discard priority of a packet is used to determine whether the packet should be discarded to reduce the heavy traffic load. Pa ...

vrQosPVnsEmissionPriority

This attribute specifies the delay importance of the packets when forwarded over VNS connections. Packets with higher emission priority (vep 1) are transmitted before packets with lower emission priority (vep 2). Delay sensitive packets should be sent wit ...

vrQosPWanEmissionPriority

This attribute specifies the delay importance of the packets when forwarded over WAN connections. Packets with higher emission priority (wep 1) are transmitted before packets with lower emission priority (wep 2). Delay sensitive packets should be sent wit ...