Q-BRIDGE-MIB Download

MIBs list

OID list for Q-BRIDGE-MIB

dot1qVlanVersionNumber: The version number of IEEE 802.1Q that this device supports.
dot1qMaxVlanId: The maximum IEEE 802.1Q VLAN ID that this device supports.
dot1qMaxSupportedVlans: The maximum number of IEEE 802.1Q VLANs that this device supports.
dot1qNumVlans: The current number of IEEE 802.1Q VLANs that are configured in this device.
dot1qGvrpStatus: The administrative status requested by management for GVRP. The value enabled(1) indicates that GVRP should be enabled on this device, on all ports for which it has not been specifically disabled. When disabled(2), GVRP is disabled on all ports and all ...
dot1qFdbTable: A table that contains configuration and control information for each Filtering Database currently operating on this device. Entries in this table appear automatically when VLANs are assigned FDB IDs in the dot1qVlanCurrentTable.
dot1qFdbEntry: Information about a specific Filtering Database.
dot1qFdbId: The identity of this Filtering Database.
dot1qFdbDynamicCount: The current number of dynamic entries in this Filtering Database.
dot1qTpFdbTable: A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
dot1qTpFdbEntry: Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information.
dot1qTpFdbAddress: A unicast MAC address for which the device has forwarding and/or filtering information.
dot1qTpFdbPort: Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that ...
dot1qTpFdbStatus: The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of dot1qTpFdbPort, nor an entry in the dot1qStaticUnicastTable) is being us ...
dot1qTpGroupTable: A table containing filtering information for VLANs configured into the bridge by (local or network) management, or learnt dynamically, specifying the set of ports to which frames received on a VLAN for this FDB and containing a specific Group destination ...
dot1qTpGroupEntry: Filtering information configured into the bridge by management, or learnt dynamically, specifying the set of ports to which frames received on a VLAN and containing a specific Group destination address, are allowed to be forwarded. The subset of these po ...
dot1qTpGroupAddress: The destination Group MAC address in a frame to which this entry's filtering information applies.
dot1qTpGroupEgressPorts: The complete set of ports, in this VLAN, to which frames destined for this Group MAC address are currently being explicitly forwarded. This does not include ports for which this address is only implicitly forwarded, in the dot1qForwardAllPorts list.
dot1qTpGroupLearnt: The subset of ports in dot1qTpGroupEgressPorts which were learnt by GMRP or some other dynamic mechanism, in this Filtering database.
dot1qForwardAllTable: A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of all multicasts applies, configured statically by management or dynamically by GMRP. An entry appears in this table for all VLANs that are currentl ...
dot1qForwardAllEntry: Forwarding information for a VLAN, specifying the set of ports to which all multicasts should be forwarded, configured statically by management or dynamically by GMRP.
dot1qForwardAllPorts: The complete set of ports in this VLAN to which all multicast group-addressed frames are to be forwarded. This includes ports for which this need has been determined dynamically by GMRP, or configured statically by management.
dot1qForwardAllStaticPorts: The set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by dot1qForwardAllPorts. This value will be restored after th ...
dot1qForwardAllForbiddenPorts: The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward All Multicast Groups may not be dynamically registered by GMRP. This value will be restored after the device is reset. A port may not be added in ...
dot1qForwardUnregisteredTable: A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of multicast group-addressed frames for which there is no more specific forwarding information applies. This is configured statically by management a ...
dot1qForwardUnregisteredEntry: Forwarding information for a VLAN, specifying the set of ports to which all multicasts for which there is no more specific forwarding information shall be forwarded. This is configured statically by management or dynamically by GMRP.
dot1qForwardUnregisteredPorts: The complete set of ports in this VLAN to which multicast group-addressed frames for which there is no more specific forwarding information will be forwarded. This includes ports for which this need has been determined dynamically by GMRP, or configured s ...
dot1qForwardUnregisteredStaticPorts: The set of ports configured by management, in this VLAN, to which multicast group-addressed frames for which there is no more specific forwarding information are to be forwarded. Ports entered in this list will also appear in the complete set shown by do ...
dot1qForwardUnregisteredForbiddenPorts: The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward Unregistered Multicast Groups may not be dynamically registered by GMRP. This value will be restored after the device is reset. A port may not be ...
dot1qStaticUnicastTable: A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific un ...
dot1qStaticUnicastEntry: Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific unicast destination address are allowed to be forwarded.
dot1qStaticUnicastAddress: The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a unicast address.
dot1qStaticUnicastReceivePort: Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other ap ...
dot1qStaticUnicastAllowedToGoTo: The set of ports for which a frame with a specific unicast address will be flooded in the event that it has not been learned. It also specifies the set of ports a specific unicast address may be dynamically learnt on. The dot1qTpFdbTable will have an eq ...
dot1qStaticUnicastStatus: This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. per ...
dot1qStaticMulticastTable: A table containing filtering information for Multicast and Broadcast MAC addresses for each VLAN, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific ...
dot1qStaticMulticastEntry: Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from this specific port for this VLAN and containing this Multicast or Broadcast destination address are allowed to be f ...
dot1qStaticMulticastAddress: The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Multicast or Broadcast address.
dot1qStaticMulticastReceivePort: Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other ap ...
dot1qStaticMulticastStaticEgressPorts: The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded, regardless of any dynamic information e.g. from GMRP. A port may not be added in this set if it is already a ...
dot1qStaticMulticastForbiddenEgressPorts: The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must not be forwarded, regardless of any dynamic information e.g. from GMRP. A port may not be added in this set if it is alread ...
dot1qStaticMulticastStatus: This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. per ...
dot1qVlanNumDeletes: The number of times a VLAN entry has been deleted from the dot1qVlanCurrentTable (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2.
dot1qVlanCurrentTable: A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
dot1qVlanCurrentEntry: Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
dot1qVlanTimeMark: A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
dot1qVlanIndex: The VLAN-ID or other identifier refering to this VLAN.
dot1qVlanFdbId: The Filtering Database used by this VLAN. This is one of the dot1qFdbId values in the dot1qFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamically by GVRP, or by management, in dot1qVlanStaticTable. ...
dot1qVlanCurrentEgressPorts: The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames.
dot1qVlanCurrentUntaggedPorts: The set of ports which are transmitting traffic for this VLAN as untagged frames.
dot1qVlanStatus: This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, corresponding to an entry in dot1qVlanStaticTable, is c ...
dot1qVlanCreationTime: The value of sysUpTime when this VLAN was created.
dot1qVlanStaticTable: A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
dot1qVlanStaticEntry: Static information for a VLAN configured into the device by (local or network) management.
dot1qVlanStaticName: An administratively assigned string, which may be used to identify the VLAN.
dot1qVlanStaticEgressPorts: The set of ports which are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port per-VLAN Registrar control for Registration Fixed for the relevant GVRP state machine on each port. A por ...
dot1qVlanForbiddenEgressPorts: The set of ports which are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port per-VLAN Registrar control for Registration Forbidden for the ...
dot1qVlanStaticUntaggedPorts: The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VL ...
dot1qVlanStaticRowStatus: This object indicates the status of this entry.
dot1qNextFreeLocalVlanIndex: The next available value for dot1qVlanIndex of a local VLAN entry in dot1qVlanStaticTable. This will report values >=4096 if a new Local VLAN may be created or else the value 0 if this is not possible. A row creation operation in this table for an entry ...
dot1qPortVlanTable: A table containing per port control and status information for VLAN configuration in the device.
dot1qPortVlanEntry: Information controlling VLAN configuration for a port on the device. This is indexed by dot1dBasePort.
dot1qPvid: The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port.
dot1qPortAcceptableFrameTypes: When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to the PVID for t ...
dot1qPortIngressFiltering: When this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the port will accept all incoming frames. This control does not affect VLAN independent BPDU frames, such as GVRP and ...
dot1qPortGvrpStatus: The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still enabled for the device, GVRP is disable ...
dot1qPortGvrpFailedRegistrations: The total number of failed GVRP registrations, for any reason, on this port.
dot1qPortGvrpLastPduOrigin: The Source MAC Address of the last GVRP message received on this port.
dot1qPortVlanStatisticsTable: A table containing per-port, per-VLAN statistics for traffic received. Separate objects are provided for both the most-significant and least-significant bits of statistics counters for ports that are associated with this transparent bridge. The most-signi ...
dot1qPortVlanStatisticsEntry: Traffic statistics for a VLAN on an interface.
dot1qTpVlanPortInFrames: The number of valid frames received by this port from its segment which were classified as belonging to this VLAN. Note that a frame received on this port is counted by this object if and only if it is for a protocol being processed by the local forwardi ...
dot1qTpVlanPortOutFrames: The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN. This includes bridge management frames originated by this device which are classified as belonging to this VLAN (e.g. GMRP, but not GVRP o ...
dot1qTpVlanPortInDiscards: The number of valid frames received by this port from its segment which were classified as belonging to this VLAN which were discarded due to VLAN related reasons. Specifically, the IEEE 802.1Q counters for Discard Inbound and Discard on Ingress Filtering ...
dot1qTpVlanPortInOverflowFrames: The number of times the associated dot1qTpVlanPortInFrames counter has overflowed.
dot1qTpVlanPortOutOverflowFrames: The number of times the associated dot1qTpVlanPortOutFrames counter has overflowed.
dot1qTpVlanPortInOverflowDiscards: The number of times the associated dot1qTpVlanPortInDiscards counter has overflowed.
dot1qPortVlanHCStatisticsTable: A table containing per port, per VLAN statistics for traffic on high capacity interfaces.
dot1qPortVlanHCStatisticsEntry: Traffic statistics for a VLAN on a high capacity interface.
dot1qTpVlanPortHCInFrames: The number of valid frames received by this port from its segment which were classified as belonging to this VLAN. Note that a frame received on this port is counted by this object if and only if it is for a protocol being processed by the local forwardi ...
dot1qTpVlanPortHCOutFrames: The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN. This includes bridge management frames originated by this device which are classified as belonging to this VLAN (e.g. GMRP, but not GVRP o ...
dot1qTpVlanPortHCInDiscards: The number of valid frames received by this port from its segment which were classified as belonging to this VLAN which were discarded due to VLAN related reasons. Specifically, the IEEE 802.1Q counters for Discard Inbound and Discard on Ingress Filtering ...
dot1qLearningConstraintsTable: A table containing learning constraints for sets of Shared and Independendent VLANs.
dot1qLearningConstraintsEntry: A learning constraint defined for a VLAN.
dot1qConstraintVlan: The index of the row in dot1qVlanCurrentTable for the VLAN constrained by this entry.
dot1qConstraintSet: The identity of the constraint set to which dot1qConstraintVlan belongs. These values may be chosen by the management station.
dot1qConstraintType: The type of constraint this entry defines. independent(1) - the VLAN, dot1qConstraintVlan, uses an independent filtering database from all other VLANs in the same set, defined by dot1qConstraintSet. shared(2) - the VLAN, dot1qConstraintVlan, shares the sa ...
dot1qConstraintStatus: The status of this entry.
dot1qConstraintSetDefault: The identity of the constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in dot1qLearningConstraintsTable.
dot1qConstraintTypeDefault: The type of constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in dot1qLearningConstraintsTable. The types are as defined for dot1qConstraintType.
qBridgeBaseGroup: A collection of objects providing device level control and status information for the Virtual LAN bridge services.
qBridgeFdbUnicastGroup: A collection of objects providing information about all unicast addresses, learnt dynamically or statically configured by management, in each Filtering Database.
qBridgeFdbMulticastGroup: A collection of objects providing information about all multicast addresses, learnt dynamically or statically configured by management, in each Filtering Database.
qBridgeServiceRequirementsGroup: A collection of objects providing information about service requirements, learnt dynamically or statically configured by management, in each Filtering Database.
qBridgeFdbStaticGroup: A collection of objects providing information about unicast and multicast addresses statically configured by management, in each Filtering Database or VLAN.
qBridgeVlanGroup: A collection of objects providing information about all VLANs currently configured on this device.
qBridgeVlanStaticGroup: A collection of objects providing information about VLANs statically configured by management.
qBridgePortGroup: A collection of objects providing port level VLAN control and status information for all ports.
qBridgeVlanStatisticsGroup: A collection of objects providing per-port packet statistics for all VLANs currently configured on this device.
qBridgeVlanStatisticsOverflowGroup: A collection of objects providing overflow counters for per-port packet statistics for all VLANs currently configured on this device for high capacity interfaces, defined as those that have the value of the corresponding instance of ifSpeed greater than 6 ...
qBridgeVlanHCStatisticsGroup: A collection of objects providing per-port packet statistics for all VLANs currently configured on this device for high capacity interfaces, defined as those that have the value of the corresponding instance of ifSpeed greater than 650,000,000 bits/second ...
qBridgeLearningConstraintsGroup: A collection of objects defining the Filtering Database constraints all VLANs have with each other.
qBridgeLearningConstraintDefaultGroup: A collection of objects defining the default Filtering Database constraints for VLANs which have no specific constraints defined.

MIBs list