Q-IN-Q-MIB Download
The structure of Q-in-Q information for the
proprietary enterprise.
IPHost Network Monitor offer an easy way of SNMP monitoring your D-Link Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for Q-IN-Q-MIB
- swQinQState
- This object is used to enable/disable the Q-in-Q status.
- swQinQInnerTpid
- This object is used to set the system's inner TPID.
- swQinQPortTable
- A table that contains Q-in-Q VLAN mode information about each port.
- swQinQPortEntry
- A list of Q-in-Q VLAN mode information for each port.
- swQinQPortIndex
- This object indicates the module's port number.
- swQinQPortRole
- This object sets the port role in Q-in-Q mode. It can be UNI port or NNI port.
- swQinQPortMissDrop
- This object is used to enable/disable C-VLAN based SP-VLAN assignment miss drop. If missdrop is enabled, the packet that does not match any assignment rule in the Q-in-Q profile will be dropped. If missdrop is disabled, then the packet will be assigned to ...
- swQinQPortTpid
- Specifies the outer TPID for each port.
- swQinQPortUseInnerPriority
- This object specifies whether to use the priority in the C-VLAN tag as the priority in the SP-VLAN tag.
- swQinQPortInnerTagState
- Specifies whether to add inner tag for ingress untagged packets.
- swQinQPortInnerTag
- If swQinQPortInnerTagState is enabled, this object specifies the inner tag.
- swQinQPortTrustCVID
- If swQinQState is enabled, this object specifies whether to use the C-VID of the ingress packet to get S-VID on the UNI port or not.
- swQinQPortVlanTranslation
- If swQinQState and swQinQPortTrustCVID are enabled, this object specifies whether to lookup VLAN translation table to get S-VID by the C-VID of the ingress packet on the UNI port or not.
- swQinQPortInnerTpid
- Specifies the inner TPID for each port.
- swQinQPortRuleTable
- A table that is used to configure a port's Q-in-Q SP-VLAN assignment rule.
- swQinQPortRuleEntry
- A list of Q-in-Q SP-VLAN assignment rules for each port.
- swQinQPortRuleIndex
- This object indicates the module's port number.
- swQinQProfileId
- This object indicates the Q-in-Q profile ID.
- swQinQPortRuleRowStatus
- This object indicates the status of this entry.
- swVlanTranslateTable
- A table that contains VLAN translation information.
- swVlanTranslateEntry
- A list of VLAN translation information.
- swVlanTranslatePortIndex
- This object indicates the module's port number.
- swVlanTranslateCVID
- The customer VLAN identifier in a C-TAG.
- swVlanTranslateSVID
- A VLAN identifier conveyed in an S-TAG.
- swVlanTranslateSVIDOperation
- The 'add' action indicates to add a tag for the assigned SP-VLAN before the C-VLAN tag. If there is S-TAG in the packet, this rule will not take effect. The 'replace' action indicates to replace the C-VLAN in the tag by the SP-VLAN. If there is no C-TAG i ...
- swVlanTranslatePriority
- The priority of the S-TAG. -1 is default value.
- swVlanTranslateRowStatus
- This object indicates the status of this entry.
- swDoubleVlanTranslateTable
- A table that contains Double Tag VLAN translation information.
- swDoubleVlanTranslateEntry
- A list of Double Tag VLAN translation information , only work on NNI port.
- swDoubleVlanTranslatePortIndex
- This object indicates the module's port number.
- swDoubleVlanTranslateSVID
- The customer VLAN identifier in a S-TAG.
- swDoubleVlanTranslateCVID
- The customer VLAN identifier in a C-TAG.
- swDoubleVlanTranslateOperation
- The 'replace' action indicates to replace the S-VLAN in the tag by the New S-VLAN.
- swDoubleVlanTranslateNewSVID
- The SP-VLAN identifier used to replace.
- swDoubleVlanTranslatePriority
- The priority of the S-TAG. -1 is default value.
- swDoubleVlanTranslateRowStatus
- This object indicates the status of this entry.
- swQinQProfileTable
- This table is used to create a Q-in-Q profile to assign SP-VLAN. Multiple rules can be specified for a Q-in-Q profile. ::= { swQinQMgmt 1 } SYNTAX SwQinQProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION A list containing Q-in-Q profile ...
- swQinQProfileRowStatus
- This object indicates the status of this entry.
- swQinQRuleTable
- This table contains Q-in-Q rule information. These rules will indicate whether to add a tag for the SP-VLAN or to replace the inner C-VLAN in the tag by the SP-VLAN. If the matched packet has a SP-VLAN tag and the action is 'add', this rule will not take ...
- swQinQRuleEntry
- A list of information about Q-in-Q rules.
- swQinQRuleProfileID
- Specifies the profile ID.
- swQinQRuleAccessID
- Specifies the ID of the Q-in-Q rule entry related to the swQinQRuleProfileID.
- swQinQRuleClassifySrcMacAddr
- Specifies the source MAC address.
- swQinQRuleClassifySrcMacAddrMask
- Specifies the source MAC address mask.
- swQinQRuleClassifyDstMacAddr
- Specifies the destination MAC address.
- swQinQRuleClassifyDstMacAddrMask
- Specifies the destination MAC address mask.
- swQinQRuleSrcIPv4Address
- Specifies an IPv4 source address.
- swQinQRuleSrcIPv4AddrMask
- Specifies the IPv4 source address mask.
- swQinQRuleDstIPv4Address
- Specifies an IPv4 destination address.
- swQinQRuleDstIPv4AddrMask
- Specifies the IPv4 destination address mask.
- swQinQRuleInnerVid
- Specifies the packet's inner VID range.
- swQinQRuleOuterVid
- Specifies the packet's outer VID range.
- swQinQRule8021p
- Specifies the packet's 802.1p priority. -1 means the 802.1p priority is not set
- swQinQRuleIpProtocol
- Specifies the IP protocol.
- swQinQRuleSourcePort
- Specifies the source port number.
- swQinQRuleDestinationPort
- Specifies the destination port number.
- swQinQRuleSpvidOperation
- The 'add' action indicates to add a tag for the assigned SP-VLAN before the C-VLAN tag. If there is S-TAG in the packet, this rule will not take effect. The 'replace' action indicates to replace the C-VLAN in the tag by the SP-VLAN. If there is no C-TAG i ...
- swQinQRuleSpvid
- Specifies the SP-VLAN ID to be assigned to the matched packet.
- swQinQPriority
- Specifies the priority of the SP-VLAN. -1 is default value.
- swQinQRuleRowStatus
- This object indicates the status of this entry.
- swQinQRuleActivePort
- Specifies the active port list which the rule takes effect.
- swVlanTranslationCVIDTable
- A table that contains VLAN translation information applied in enabling port's swQinQPortVlanTranslation, swQinQPortTrustCVID and QinQ.
- swVlanTranslationCVIDEntry
- A list of VLAN translation information applied in enabling a port's swQinQPortVlanTranslation, swQinQPortTrustCVID and QinQ.
- swVlanTranslationCVID
- The customer VLAN identifier in a C-TAG.
- swVlanTranslationSVID
- A VLAN identifier conveyed in an S-TAG.
- swVlanTranslationSVIDOperation
- The 'add' action indicates to add a tag for the assigned SP-VLAN before the C-VLAN tag. If there is S-TAG in the packet, this rule will not take effect. The 'replace' action indicates to replace the C-VLAN in the tag by the SP-VLAN. If there is no C-TAG i ...
- swVlanTranslationCVIDRowStatus
- This object indicates the status of this entry.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
