QoS-MIB Download
The structure of QoS for the proprietary enterprise.
IPHost Network Monitor offer an easy way of SNMP monitoring your D-Link Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for QoS-MIB
- swQoSBandwidthControlTable
- .
- swQoSBandwidthControlEntry
- A list of information contained in the swQoSBandwidthControlTable.
- swQoSBandwidthPort
- Indicates the port number.
- swQoSBandwidthRxRate
- Indicates Rx Rate of the specified port. Value 0 means no limit.
- swQoSBandwidthTxRate
- Indicates the Tx Rate of the specified port. A value of 0 means no limit.
- swQoSBandwidthRadiusRxRate
- The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate.
- swQoSBandwidthRadiusTxRate
- The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate.
- swQoSSchedulingTable
- .
- swQoSSchedulingEntry
- A list of information contained in the swQoSSchedulingTable.
- swQoSSchedulingPort
- Indicates the port number.
- swQoSSchedulingClassID
- Indicates the hardware queue number.
- swQoSSchedulingWeight
- Indicates the maximum number of packets the above specified hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets.
- swQoSSchedulingMechanism
- Indicates the mechanism of QoS scheduling. This object indicates the Qos Scheduling Mechanism mode on a port.
- swQoSSchedulingMechanismEffec
- Indicates the effective mechanism of QoS scheduling. If the swQoSSchedulingWeight is configured to be 0, then this object will always display strict (1).
- swQoS8021pDefaultPriorityTable
- .
- swQoS8021pDefaultPriorityEntry
- A list of information contained in the swQoS8021pDefaultPriorityTable.
- swQoS8021pRadiusPriority
- Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.
- swQoSHolPreventionCtrl
- This controls QoS HoL Prevention.
- swQosInBandMgmtSetDefPriority
- Sets the default priority. It is project dependent.
- swQosInBandMgmtPktPriority
- Specifies the priority of packets, the range is 0-7. 7 is the highest priority.
- swQos8021pColorMapCtrlTable
- A table that contains information about priority map to packet color on each port.
- swQos8021pColorMapCtrlEntry
- A list that contains priority map to packet color per port.
- swQos8021pColorMapCtrlPortIndex
- This object indicates the port number.
- swQos8021pColorMapCtrlPriorityIndex
- This object indicates the source priority of incoming packets.
- swQos8021pColorMapCtrlColor
- This object indicates the source priority of incoming packets.
- swQosDscpTrustPortCtrlTable
- A table that contains information about the DSCP trust portlist.
- swQosDscpTrustPortCtrlEntry
- A list that contains the DSCP trusted state per port.
- swQosDscpTrustPortCtrlPortIndex
- This object indicates the port number.
- swQosDscpTrustPortCtrlState
- This object is used to enable/disable the DSCP trusted state on a selected port.
- swQosDscpMapCtrlTable
- A table that contains information about DSCP map to priority and packet color on each port.
- swQosDscpMapCtrlEntry
- A list that contains DSCP map information for each port.
- swQosDscpMapCtrlPortIndex
- This object indicates the port number.
- swQosDscpMapCtrlDscpIndex
- This object indicates the source DSCP incoming packet.
- swQosDscpMapCtrl8021pPriority
- This object indicates the 802.1p priority on each port. Default value is: DSCP Priority 0-7 0 8-15 1 16-23 2 24-31 3 32-39 4 40-47 5 48-55 6 56-63 7 ::= { swQosDscpMapCtrlEntry 3 } SYNTAX INTEGER(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION ...
- swQosDscpMapCtrlColor
- This object maps the color for packets on each port.
- swCoSBandwidthControlTable
- A table that contains information about CoS Bandwidth Control on each port.
- swCoSBandwidthControlEntry
- A list that contains CoS Bandwidth Control information for each port.
- swCoSBandwidthPort
- This object indicates the port number.
- swCoSBandwidthCoSID
- Indicates the hardware queue number.
- swCoSBandwidthMinRate
- Indicates the Minimum Rate of the specified port. A value of 0 means no limit.
- swCoSBandwidthMaxRate
- Indicates the Maximum Rate of the specified port. A value of 0 means no limit.
- swQoSScheduleProfileTable
- A table that contains information about schedule profile.
- swQoSScheduleProfileEntry
- A list of information contained in the swQoSScheduleProfileTable.
- swQoSScheduleProfileId
- Indicates the profile identification.
- swQoSScheduleProfileCoSID
- Indicates the hardware queue number.
- swQoSScheduleProfileMechanism
- Indicates the mechanism of the specify hardware queue
- swQoSScheduleProfileWeight
- Indicates the maximum number of packets the above specified hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets.
- swQoSScheduleGroupTable
- A table that contains information about schedule group.
- swQoSScheduleGroupEntry
- A list of information contained in the swQoSScheduleGroupTable.
- swQoSScheduleGroupPortMember
- Indicates the ports that use the specified profile identification.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
