SINGLE-IP-MIB Download
The Single IP management MIB.
IPHost Network Monitor offer an easy way of SNMP monitoring your D-Link Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for SINGLE-IP-MIB
- swSingleIPVersion
- This object indicates the version of single IP management supported in the system.
- swSingleIPCapability
- This object indicates the capability of the switch system.
- swSingleIPPlatform
- This object indicates the platform of the switch system.
- swSingleIPRoleState
- This object indicates the role state of the switch system.
- swSingleIPHoldtime
- This object indicate the holdtime of the switch in second . default value is 180 , maximum value is 255 , minimum value is 100. DEFVAL { 100 } ::= { swSingleIPCtrl 3 } SYNTAX INTEGER (30..90) MAX-ACCESS read-write STATUS current DESCRIPTION This object ...
- swSingleIPMSEntry
- A list of information about member switchs belongs to the single IP management group.
- swSingleIPMSID
- The ID of the member switch. When create a SwSingleIPMSEntry entry, this object should fill a value between 1 to 32, but will not be used during create process(Note: The MS-ID is assigned by SingleIP engine). The value of this object will be the correct m ...
- swSingleIPMSDeviceName
- Specifies that the name of switch .
- swSingleIPMSMacAddr
- This object Specifies the MAC address of the member switch.
- swSingleIPMSFirmwareVer
- Specifies the firmware version of the switch .
- swSingleIPMSCapability
- Specifies the Capability of the switch .
- swSingleIPMSPlatform
- Specifies the platform of the switch .
- swSingleIPMSHoldtime
- Specifies the holdtime of Single IP management ptotocol send by this member switch . ::= { swSingleIPMSEntry 7 } SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION Specifies the CaS id when create MS entry. The object is used only when c ...
- swSingleIPMSPassword
- Specifies the Cas password when create MS entry. The object is used only when create swSingleIPMSEntry. The value always shows zero length string.
- swSingleIPMSRowStatus
- This object indicates the status of this entry. Create means set CaS to MS, and DESTROY means set MS to CaS
- swSingleIPCaSTable
- This table contain information of candidate switchs. This table is a read only table list ,all information about candidate switchs will maintain automatically by Single IP topology discovery protocol .
- swSingleIPCaSEntry
- A list of information about candidate switchs belongs to the single IP management group.
- swSingleIPCaSID
- The ID of the candidate switchs in the LAN learned by the command switch .
- swSingleIPCaSDeviceName
- Specifies that the name of switch .
- swSingleIPCaSMacAddr
- This object Specifies the MAC address of the candidate switch.
- swSingleIPCaSFirmwareVer
- Specifies the firmware version of the switch .
- swSingleIPCaSCapability
- Specifies the Capability of the switch .
- swSingleIPCaSPlatform
- Specifies the platform of the switch .
- swSingleIPCaSHoldtime
- Specifies the holdtime of Single IP management ptotocol send by this candidate switch . ::= { swSingleIPCaSEntry 7 } -- ------------------------------------------------------------- -- swSingleIPGroupTable -- --------------------------------------------- ...
- swSingleIPGroupEntry
- A list of information about single IP management groups.
- swSingleIPGroupMacAddr
- This object Specifies the MAC address of the command switch.
- swSingleIPGroupName
- Specifies that the name of the Single IP management group .
- swSingleIPGroupDeviceName
- Specifies that the name of command switch of the group .
- swSingleIPGroupMSNumber
- Specifies the member switch number of the group . ::= { swSingleIPGroupEntry 4 } SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION Specifies the firmware version of the switch .
- swSingleIPGroupCapability
- Specifies the Capability of the switch .
- swSingleIPGroupPlatform
- Specifies the platform of the switch .
- swSingleIPGroupHoldtime
- Specifies the holdtime of Single IP management ptotocol send by this command switch . ::= { swSingleIPGroupEntry 8 } -- ------------------------------------------------------------- -- swSingleIPNeighborTable -- ------------------------------------------ ...
- swSingleIPNeighborEntry
- A list of information about single IP management Neighbors.
- swSingleIPNBReceivedPort
- Specifies the received port of the Neighbor switch.
- swSingleIPNBMacAddr
- This object Specifies the MAC address of the Neighbor switch.
- swSingleIPNBRoleState
- This object Specifies the role state of the Neighbor switch.
- swSingleIPMSTrapMessage
- The string that member switch sent.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
